AXC765, AXC767, AXC7610, AXC7615 & AXC7620 are new Active or Active Optical DAC versions of 5-meter to 20-meter Direct Attach SFP+ cables for 10G network cabling between SFP+ devices (network switches, servers, storage). These DAC integrate active SFP+ compatible connectors with a copper twin-axial cable, or a duplex fiber optic cable into a low-latency, energy-efficient & low-cost cabling solution. 5 Metre Direct Attach Cables for 10G SFP+ short run Active SFP+ connector on both ends replacing SFP+ transceivers Highest performance pre-terminated twin-axial cable Low-latency, energy-efficient & low-cost transparent solution 5-Year NETGEAR Limited Warranty ...

AXC765, AXC767, AXC7610, AXC7615 & AXC7620 are new Active or Active Optical DAC versions of 5-meter to 20-meter Direct Attach SFP+ cables for 10G network cabling between SFP+ devices (network switches, servers, storage). These DAC integrate active SFP+ compatible connectors with a copper twin-axial cable, or a duplex fiber optic cable into a low-latency, energy-efficient & low-cost cabling solution. 7 Metre Direct Attach Cables for 10G SFP+ short run Active SFP+ connector on both ends replacing SFP+ transceivers Highest performance pre-terminated twin-axial cable Low-latency, energy-efficient & low-cost transparent solution 5-Year NETGEAR Limited Warranty ...

SFP+ optic for multimode 50/125µm OM3 or OM4 fiber NETGEAR Pro Safe 10 Gigabit SFP+ transceivers fit into M5300, M7100 & M7300 series standard SFP+ interfaces, providing hot-swappable installation & removal. Select Smart switches & Plus switches will also connect 10 Gigabit SFP+ transceivers. Features 10 Gigabit Ethernet “short range” fiber connectivity LC duplex connector Fits into SFP+ interfaces of M5300, M7100 & M7300 series Managed Switches Fits into SFP+ interfaces of select Smart & Plus Switches Drives 10 Gigabit Ethernet up to 550 m (1, 804 ft) distances with 50/125µm OM4 multimode fiber cables Drives 10 Gigabit Ethernet up to 300 m (984 ft) distances with 50/125µm OM3 multimode fiber cables Drives 10 Gigabit Ethernet up to 33 m (108 ft) distances with 62.5/125µm OM1/OM2 multimode fiber cables Ordering part number: (1 unit) AXM761-10000S Ordering part number: (pack of 10 units) AXM761P10-10000S ...

The NETGEAR 10GBASE-T SFP+ Transceiver (AXM765) delivers 10G copper connectivity with CAT6a or CAT7 cabling up to 30 meters (98.5 feet) when inserted in a switch SFP+ fiber module slot. The AXM765 fits into SFP+ interfaces of M4300, M5300, M6100, M7100 & M7300 Managed Switches, as well as select Smart Managed Pro & Plus Switches. Compatible with the IEEE 802.3an/bz standard, AXM765 delivers Multi-Gigabit copper connectivity with CAT5e or CAT6 cabling up to 100 meters (92.8 feet) when inserted in Multi-Gigabit SFP+ fiber module slot, or Gigabit copper connectivity when inserted in Gigabit SFP fiber module slot. ...

FULL PROTECTION OF YOUR BUSINESS DATA WITH INSTANT VPN & INTEGRATED FIREWALL One-step Instant VPN for business protection & remote or site-to-site secure access Easy setup, configuration & instant VPN connectivity from the NETGEAR Insight app or Cloud Portal Stateful Packet Inspection Firewall & easy rule setting for instant protection against intrusion Router setup (DHCP, NAT rules, DMZ ports) from the Insight app or Cloud Portal Full routing capabilities with DHCP, NAT, PPTP, L2TP VPN Business Router with Inter VLAN routing, Support for Qo S & 802.1q VLANs (256) VLAN in VLAN support (Qin Q) for private VLAN tagging in ISP network for an additional layer of isolation & security VPN with SSL Encryption (DES, 3DES, AES) REMOTE MONITORING & MANAGEMENT FROM NETGEAR INSIGHT The Insight Instant VPN Router is fully monitored & managed through NETGEAR Insight either locally or remotely. NETGEAR Insight provides: The VPN Router hardware status, temperature, port speeds, CPU load, memory utilization The VPN connection status – connected/disconnected, number of connected users, method of authentication, current traffic, visited destination from guest portal, sites connected (for site-to-site VPN), volume of data exchanged Firewall rule configuration & update, NAT traversal, port forwarding, FTP WARRANTY & SUPPORT 5-year NBD hardware warranty Next Business Day replacement 90 day phone/chat support ...

NETGEAR's line of antennas & accessories gives you multiple options for maximizing the reach & performance of your wireless devices. Every WLAN deployment is unique. When planning a network that incorporates wireless, varying facility sizes, construction materials, distance between transmission points & physical obstructions must be accounted for. With both directional & omni-directional antennas (also referred to as range extenders), low-loss cables, mounting hardware, & other accessories, installers can customize a wireless solution that meets the requirements of even the most challenging applications. This antenna cable offers low loss at 2.4 GHz & added flexibility for setting up access points at a greater distance from a power source. It comes with reverse SMA connectors & provides a standard connection optimized for use with NETGEAR's line of WLAN antennas, & Booster/ Power Injector products. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The car power adapter powers the 3G/UMTS mobile broadband wireless router while on the road. The small & convenient car power adapter is a universal power adapter compatible with most cars, trucks & SUVs. Use it to create a Wi-Fi hotspot virtually anywhere. It provides an input range up to 24V DC & is protected from power surges. ...

This bundle contains 2x Netgear WNDAP350 Pro Safe wireless-N access points & a FREE Netgear WMS5316 Pro Safe 16-AP Wireless controller. WNDAP350 Netgear WNDAP350 is the latest business class access point, offering Dual-Band 802.11n with up to 15 times the speed, up to 600 Mbps & ten times more coverage than legacy networks. The Netgear WNDAP350 access point is designed to allow for wireless networks inside a business & provide the bandwidth needed for services such as Vo IP, video conferencing & other high-bandwidth applications. The Netgear WNDAP350 Access Point supports both point-to-point & point-to-multipoint configurations. Key Features Up to 15x the speed & 10x the coverage of 802.11a, 802.11g networks Operation in 5 GHz radio band to avoid interference from 802.11b or 802.11g network devices Concurrent operation in 2.4 GHz & 5 GHz radio band Backward compatibility with 802.11a, 802.11g & 802.11b network devices Integrated 802.3af Po E eliminates extra cables & enables optimal placement of the access point Comprehensive SNMP functionality for advanced network management Deploy wireless coverage over large areas with point-to-point & point-to-multipoint bridging via Wireless Distribution System (WDS) Security features include WPA, WPA2, rogue AP detection & 802.1x with RADIUS support Plenum-rated for safe & convenient placement above drop-down ceilings Metal case

Includes:: Kensington lock slot for anti-theft Internal antennas factory-optimized for maximum RF performance Antenna take-offs enable optional accessory antenna attachment for 2.4 GHz operations Lifetime hardware warranty Netgear WNDAP350 Access Point utilises the 2.4 G Hz & 5 G Hz frequencies to allow more bandwidth for different devices & needs, reduce interference & support speeds up to 600 Mbps! Performance
- Wireless N with Concurrent dual band operation with quality of service Mobility – Up to 15x the speed & 10x the coverage of legacy products Security – Full enterprise security with WAP, WPA2, 802.1x with Radius & built in rogue AP detection Advanced Speed & Range with Comprehensive Internet Security Up to 15x the speed & 10x the coverage of 802.11g networks Concurrent operation in 2.4 GHz & 5 GHz radio band for maximum wireless throughput Backward compatibility with 802.11a, 802.11g & 802.11b network devices Security features include WPA, WPA2, rogue AP detection & 802.1x with RADIUS support Support for 802.3af Po E for optimal placement of access point WMS5316 The NETGEAR Pro Safe 16-AP Wireless Management System is an easy to use appliance to simplify the set up & management of wireless networks. Supporting up to 16 access points, the WMS5316 Wireless Management System provides a single location to configure & manage the entire wireless network. Designed for growing companies who don't want the complexity & cost of full wireless controllers, the WMS5316 Wireless Management System delivers centralized management, load balancing, RF management, & guest access via an intuitive interface. Priced far below a full wireless controller, the WMS5316 Wireless Management System provides significant time savings & simplifies the deployment & management of a wireless network. Mimicking the set up process of a single access point, the easy to use WMS5316 Wireless Management System enables even novice users to adopt a centralized management architecture for up to 16 access points. With automatic discovery of all supported access points in the network, the WMS5316 Wireless Management System speeds the configuration of a the wireless network. Automatic Radio Frequency (RF) management & channel selection takes care of optimizing the access points in the network for maximum connectivity, without intervention from the network administrator. A single entry of wireless parameters & security settings can then be pushed out to all of the access points, enabling a fully functional wireless network in minutes. The WMS5316 Wireless Management System monitors the wireless network to ensure optimal performance & respond to changes in the RF environment. It will automatically re-assign channels & adjust RF parameters for maximum connectivity. If enabled, load-balancing on Pro Safe Access Points can ensure that no single access point is overloaded continuously, by diverting clients to nearby access points. By actively managing the wireless network, the WMS5316 Wireless Management System provides an enhanced wireless experience without any IT staff having to lift a finger. By centrally configuring all access points in the network, the WMS5316 Wireless Management System ensures identical security settings throughout the coverage area so that clients, guests & unwanted intruders all get appropriate access or denial to network resources. Setting up WPA2 encryption keys to keep traffic safe from prying eyes & MAC authentication lists to only allow approved devices on the wireless network can be done once & sent out to the entire network. When used with Pro Safe Access Points, the WMS5316 Wireless Management System can configure a guest SSID to allow visitors safe access to the Internet without allowing visibility to company files or resources. in addition, 802.1x network authentication can be applied for further verification of clients' rights to be on the network. Rogue AP detection will find all access points in the area, enabling administrators to take appropriate actions. The WMS5316 Wireless Management System with central management simplifies the process of deploying a secured wireless network. Supporting a wide portfolio of standard NETGEAR access points, the WMS5316 Wireless Management System enables customers to select the right access points for their needs, even mixing models to provide the right coverage, as well as an upgrade path as technology changes. The access points retain their standalone capabilities & do not require a conversion to be managed by the WMS5316 Wireless Management System. Supported models include SOHO-class 802.11G access points as well as professional caliber dual band 802.11N access points.


...

- Product Description: NETGEAR D6000
- wireless router
- DSL modem
- 802.11a/ b/ g/ n/ ac
- desktop
- Device Type:




...

The Netgear D6200 Wi-Fi Modem Router delivers next generation Wi-Fi at 300+867 Mbps speeds. With a built-in ADSL2+ modem, it creates a high speed internet gateway with speeds up to 3 times faster than 802.11n. The D6200 with simultaneous dual band enables HD streaming & is ideal for larger homes with multiple devices. Advanced features include Ready SHARE Cloud, which allows for remote access to a USB (Universal Serial Bus) hard drive. Performance & use Built-in ADSL2+ Modem Next generation Wi-Fi – 300+867 Mbps speeds Ideal for current & future Wi-Fi devices Ready SHARE Cloud – remote access to USB (Universal Serial Bus) hard drive Gigabit WAN – future-proof your network with support for cable/fibre broadband ...