The TR3X6G1333C9 is a 6144 M Byte kit of DDR3 SDRAM DIMMs built using Corsairs high performance heat spreader. This part delivers outstanding performance in the latest generation of X58 DDR3-based motherboards. It has been tested extensively in popular X58 motherboards to ensure compatibility & performance at its rated speed. This memory has been verified to operate at 1333 M Hz at latencies of 9-9-9-24 at 1.5V Full

Specification Capacity: 6GB (3x 2GB) Type DRAM Technology DDR3 SDRAM Form Factor DIMM -240 pin Memory Speed 1333 Mhz Latency Timings 9-9-9-24 RAM Features Matched triple kit for X58 based motherboards with an Intel Core i 7 CPU Compatible Slots 3 x memory Service & Support Lifetime Warranty

...

The XMS3 family is Corsairs mainstream line of performance DDR3 memory. These modules allow users to experience outstanding memory performance & stability. Available in Corsairs XMS heat spreaders, each module is built using carefully selected RAMs. This 6GB triple kit memory solution runs at an incredibly fast 1333 M Hz at CAS latency of 9-9-9- 24. So not only do you get to run your system at 1333 M Hz but with these tight Latency timings your system performance will rock. ...

The DOMINATOR is the ultimate performance memory solution. Limited to only extremely high memory speeds, the Corsair DOMINATOR only uses highly screened IC&8217;s to guarantee performance & over-clockability. Using ultra efficient Dual-path Heat Xchange (DHX) cooling technology. With removable heat sinks, the DOMINATOR modules can even be outfitted with additional upcoming accessories with enhanced features. Specifications &8226; Density: 6GB (3x 2GB Module) &8226; Speed: 1600 M Hz &8226; Timing: 7-8-7-20 &8226; Type: DDR3 &8226; Format: DIMM &8226; Pin Out: 240 Pin &8226; Voltage: 1.65V ...

The Dominator family of memory represents the ultimate in performance technology engineering from Corsair. The Dominator is designed to have the highest performing IC maximum over-clocking capability & efficient DHX cooling
- all the while being stable & reliable. Very few components make it into the Dominator family. Corsair performs rigorous testing & screening on all components to select only the best for the Dominator modules. The tests check for high frequency and/or low latency capabilities for each IC. Then, they are thoroughly tested for maximum interoperability & reliability as a united group to meet the stringent design criteria demanded by performance computing & gaming users.
...

The TR3X3G1600C9 is a 6144 M Byte kit of DDR3 SDRAM DIMMs built using Corsairs high performance heat sink which

Includes::

...

The CORSAIR 7000D AIRFLOW is a full-tower ATX case for the most ambitious builds, with an airflow-optimized steel front panel for maximum air intake. CORSAIR Rapid Route cable management easily keeps your cables hidden from sight, while a massive interior enables a multitude of cooling options, including up to 12x 120mm fans or up to three simultaneous 360mm radiators. Three included 140mm CORSAIR Air Guide fans deliver concentrated airflow for enhanced cooling, & customizable side fan mounts hold up to a 420mm radiator. Show off your components behind a tool-free tempered glass panel & add your own personal touch with a customizable windowed PSU shroud complete with a three-slot vertical GPU mount. With room for up to ten storage drives, a front I/O panel including a USB (Universal Serial Bus) Type-C port & four USB (Universal Serial Bus) 3.0 ports, & easy-access hinged side doors, you can build your legacy in the 7000D AIRFLOW Main Features Build your legacy with the 7000D AIRFLOW, a full-tower case for your most ambitious PC builds
- offering easy cable management, a spacious interior, & massive cooling potential with room for up to three simultaneous 360mm radiators. A high-airflow optimized steel front panel delivers massive airflow to your system for maximum cooling. The CORSAIR Rapid Route cable management system makes it simple & fast to route your major cables through a single hidden channel, with an easy-access hinged door & a roomy 30mm of space behind the motherboard for all of your cables.

Includes:: three CORSAIR 140mm Air Guide fans & PWM fan repeater, utilizing anti-vortex vanes to concentrate airflow & enhance cooling. A massive interior accommodates up to 12x 120mm or 7x 140mm cooling fans, & makes it possible to install multiple radiators including 3x simultaneous 360mm or 2x simultaneous 420mm for extreme cooling. Customizable side fan mounts allow you to side-mount up to 4x 120mm fans or up to a 420mm radiator, opening up a new world of cooling options. Put the spotlight on your graphics card with a three-slot vertical GPU mount on the PSU shroud, big enough for todays most powerful graphics cards. A fully equipped modern front I/O panel

Includes:: a USB (Universal Serial Bus) 3.1 Type-C Port, 4x USB (Universal Serial Bus) 3.0 ports, & a combination audio/microphone jack. Holds all the storage youll need for years, thanks to 6x combo 2.5in / 3.5in drive trays & 4x 2.5in SSD mounts. Show off your high-profile components & RGB lighting behind a beautiful tool-free tempered glass side panel. A windowed PSU shroud is fully customizable for your own personalized inserts, perfect for creating a jaw-dropping mod. Two tool-free hinged side panels with simple & secure snap-on attachment, along with removable front & roof panels, enable easy access to your components.




...

BUILD YOUR MAGNUM OPUS The CORSAIR 7000D AIRFLOW is a full-tower ATX case for the most ambitious builds, with an airflow-optimized steel front panel for maximum air intake. CORSAIR Rapid Route cable management easily keeps your cables hidden from sight, while a massive interior enables a multitude of cooling options, including up to 12x 120mm fans or up to three simultaneous 360mm radiators. Three included 140mm CORSAIR Air Guide fans deliver concentrated airflow for enhanced cooling, & customizable side fan mounts hold up to a 420mm radiator. Show off your components behind a tool-free tempered glass panel & add your own personal touch with a customizable windowed PSU shroud complete with a three-slot vertical GPU mount. With room for up to ten storage drives, a front I/O panel including a USB (Universal Serial Bus) Type-C port & four USB (Universal Serial Bus) 3.0 ports, & easy-access hinged side doors, you can build your legacy in the 7000D AIRFLOW. MAKE BUILDING DREAMS COME TRUE The 7000D AIRFLOW is a full-featured, full-tower case offering easy cable management, a spacious interior, & massive cooling potential with room for up to three simultaneous 360mm radiators. A massive interior accommodates up to 12x 120mm or 7x 140mm cooling fans, & makes it possible to install multiple radiators including 3x simultaneous 360mm or 2x simultaneous 420mm for extreme cooling. Side-mount up to 4x 120mm fans or up to a 420mm radiator, opening up a new world of cooling options. HIGH-AIRFLOW FRONT PANEL An optimized steel front panel delivers massive airflow to your system for maximum cooling. THREE INCLUDED 140MM FANS WITH PWM REPEATER CORSAIR Air Guide fans utilize anti-vortex vanes to concentrate airflow & enhance cooling. CORSAIR RAPIDROUTE CABLE MANAGEMENT SYSTEM Makes it simple & fast to route your major cables through a single hidden channel, with an easy-access hinged door & a roomy 30mm of space behind the motherboard for all of your cables. Two tool-free hinged side panels with simple & secure snap-on attachment, along with removable front & roof panels, enable easy access to your components. THREE-SLOT VERTICAL GPU MOUNT Put the spotlight on your graphics card with a vertical mount on the PSU shroud, big enough for today’s most powerful graphics cards FULLY EQUIPPED FRONT PANEL I/O

Includes:: a USB (Universal Serial Bus) 3.1 Type-C Port, 4x USB (Universal Serial Bus) 3.0 ports, & a combination audio/microphone jack. EXPANSIVE STORAGE SPACE Fits a multitude of drives thanks to 6x combo 2.5in / 3.5in drive trays & 4x 2.5in SSD mounts. CUSTOMIZABLE WINDOWED PSU SHROUD Add your own personalized inserts, perfect for creating a jaw-dropping mod.

...

BUILD YOUR MAGNUM OPUS The CORSAIR i CUE 7000X RGB full-tower ATX case puts your build on display behind three tempered glass panels. CORSAIR Rapid Route cable management easily keeps your cables hidden from sight, while a massive interior enables a multitude of cooling options, including room for up to three simultaneous 360mm radiators & customizable side fan mounts that accommodate up to a 420mm radiator. Four included CORSAIR SP140 RGB ELITE fans deliver amazing lighting & concentrated airflow, controlled by an included i CUE COMMANDER CORE XT. Show off your components behind a tool-free tempered glass panel & add your own personal touch with a customizable windowed PSU shroud complete with a three-slot vertical GPU mount. With room for up to ten storage drives, a front I/O panel including a USB (Universal Serial Bus) Type-C port & four USB (Universal Serial Bus) 3.0 ports, & easy-access hinged side doors, you can build your magnum opus in the 7000X RGB. MAKE BUILDING DREAMS COME TRUE The 7000X RGB showcases your system behind three gorgeous tempered glass panels while making it easy to build & cool thanks to clever cable management & a spacious interior. A massive interior accommodates up to 12x 120mm or 7x 140mm cooling fans, & makes it possible to install multiple radiators including 3x simultaneous 360mm or 2x simultaneous 420mm for extreme cooling. An included CORSAIR i CUE COMMANDER CORE XT Controller, CORSAIR i CUE software & PWM fan repeater enable RGB & fan speed control out of the box FOUR INCLUDED 140MM RGB FANS CORSAIR SP RGB ELITE PWM fans feature eight individually addressable RGB LEDs per fan & utilize Air Guide technology to concentrate airflow & enhance cooling. CORSAIR RAPIDROUTE CABLE MANAGEMENT SYSTEM Makes it simple & fast to route your major cables through a single hidden channel, with an easy-access hinged door & a roomy 30mm of space behind the motherboard for all of your cables. Two tool-free hinged side panels with simple & secure snap-on attachment, along with removable front & roof panels, enable easy access to your components. THREE-SLOT VERTICAL GPU MOUNT Put the spotlight on your graphics card with a vertical mount on the PSU shroud, big enough for today’s most powerful graphics cards. FULLY EQUIPPED FRONT PANEL I/O

Includes:: a USB (Universal Serial Bus) 3.1 Type-C Port, 4x USB (Universal Serial Bus) 3.0 ports, & a combination audio/microphone jack NEVER RUN OUT OF SPACE Fits a multitude of drives thanks to 6x combo 2.5in / 3.5in drive trays & 4x 2.5in SSD mounts. CUSTOMIZABLE WINDOWED PSU SHROUD Add your own personalized inserts, perfect for creating a jaw-dropping mod.

...

The Corsair Gaming Series GS700 power supply is the ideal price-performance solution for building or upgrading a Gaming PC. A single +12V rail provides up to 56A of reliable, continuous power for multi-core gaming PCs with multiple graphics cards. The ultra-quiet, dual ball-bearing fan automatically adjusts its speed according to temperature, so it will never intrude on your music & games. Choose Your Color Tri-color LEDs illuminate the transparent fan blades at your comm&. Choose red, white or blue for the appropriate dramatic effect, or turn them off entirely at the press of a button Corsair Gaming Series GS700

Features: It supports the latest ATX12V v 2.3 standard & is backward compatible with ATX12V 2.2 & ATX12V 2.01 systems An ultra-quiet 140mm double ball-bearing fan delivers excellent airflow at an exceptionally low noise level by varying fan speed in response to temperature 80 Plus certified to deliver 80% efficiency or higher at normal load conditions (20% to 100% load) 0.99 Active Power Factor Correction provides clean & reliable power Universal AC input from 90~264V — no more hassle of flipping that tiny red switch to select the voltage input! Extra long fully-sleeved cables support full tower chassis A three year warranty & lifetime access to Corsair’s legendary technical support & customer service Over Current/ Voltage/ Power Protection, Under Voltage Protection & Short Circuit Protection provide complete component safety Dimensions: 150mm (W) x 86mm (H) x 160mm (L) MTBF: 100, 000 hours Safety Approvals: UL, CUL, CE, CB, FCC Class B, Tu V, CCC, C-tick

...

Corsair Professional Series power supplies set a new standard by which all premium PSUs must be judged. Designed & engineered using cutting-edge technology, each Corsair Professional Series power supply is built to the highest quality standards, & delivers the features & performance that technology enthusiasts dem&. Corsair Professional Series power supply units
- designed for enthusiasts. Continuous power output rated at 50°C Industrial Components for Higher Performance Flat Modular Cables High Efficiency Circuitry Design 7-Year Warranty Corsair 750w HX Modular PSU Features Enhanced modular flexible cables enable easier cable routing & increased airflow in the system. Guaranteed to deliver rated specifications at 50 degrees C. Supports the ATX12V v 2.3 & EPS12V 2.91 standards & is backwards compatible with ATX12V 2.01 systems. Double forward switching circuitry design offers high efficiency, up to 90% under typical load range. Active Power Factor Correction with PF value up to 0.99 provides clean & reliable power to your system. Universal AC input 90~264V automatically scans & detects the correct voltage. No more hassle of flipping that tiny red switch! Ultra quiet 140mm double ball-bearing fan delivers excellent airflow at an exceptionally low noise level by varying the RPM in response to temperature. Over Current/ Voltage/ Power Protection, Under Voltage Protection, & Short Circuit Protection provide maximum safety for your critical system components. 105 degrees C rated industrial grade capacitors provide uncompromised performance & reliability, delivering 4 times the lifespan of conventional 85 degrees C rated capacitors. Dimension: 150mm (W) x 86mm (H) x 180mm (L) MTBF: 100, 000 Hours Safety Approvals: UL, CUL, CE, CB, FCC Class B, Tu V, CCC, C-tick Connectors Included ATX 24 pin & 20 pin compatible x 1 EPS/ATX12V 8-4 pin x 1 PCI-E 6+2 pin x 4 SATA x 12 4 pin Peripheral x 8 Floppy x 2
...