The Lancool II Mesh RGB is the latest update to Lian Lis popular Lancool series. This Mid-Tower case features a full mesh front panel, for enhanced airflow, & has been optimised for illumination as it features controller buttons to easily cycle through colours & effects of the three 120mm ARGB fans included. The Lancool II Mesh RGB also retains many of the characteristic features of the Lancool series such as a sleek, futuristic design & the use of premium materials, including SGCC steel & two tempered glass side panels. The Lancool II Mesh RGB at a glance: Premium Mid-Tower for motherboards up to E-ATX Full mesh front panel for outstanding air flow 3 x 120mm ARGB fans bundled with case Dual tempered glass panels with magnetic closing mechanism Room for up to a total of eight 120mm & eleven 2.5& Prime; SSDs The Lancool II Mesh RGB in detail: The Lancool II is a modern Mid-Tower with a stylish design & excellent cooling performance. It is has a robust steel frame, full mesh front panel & is perfect for RGB illumination. Optimised for airflow This new version of the Lancool II has been optimised for airflow with a large mesh front panel. As well as that the front supports up to three 120- or two 140 mm fans, with the roof supporting two fans up to 140 mm in diameter, one 120mm fan at the back & two 120mm fans about the PSU chamber. Regarding water cooling options, it is possible to install Ai O- & custom water cooling solutions. Up to a 360mm radiator can be fitted to the front & a 240mm radiator can be attached to the top of the case. In order to ensure clean air circulates within the case, Lian Li have included magnetic dust filters, which fit to the top & bottom of the case. Outstanding illumination & interior capacity This particular model of the Lancool II Mesh

Includes:: three 120mm 3-PIN 1300 RPM ARGB fans that can be fitted to the front panel. This fan configuration complements the mesh front panel to create an eye catching effects. These fans are of course digitally addressable & can be controlled via the motherboard or at the touch of the illumination colour or mode buttons on the i/o panel. There is room inside the Lancool II Mesh RGB for many components. Up to an E-ATX motherboard can be installed Two 2.5& Prime; SSDs can be attached to individual mounts to the back of the motherboard tray. The right cover panel accommodates two more 2.5& Prime; drives on the inside. Under the power supply cover there is a drive cage for three 3.5& Prime; or 2.5& Prime; drives. Finally the i/o panel, in addition to featuring illumination controller buttons for the ARGB fans has an audio jack two USB (Universal Serial Bus) 3.0 ports & one (optional) USB (Universal Serial Bus) 3.1 TYPE C port.

...

The Lancool II Mesh RGB is the latest update to Lian Lis popular Lancool series. This Mid-Tower case features a full mesh front panel, for enhanced airflow, & has been optimised for illumination as it features controller buttons to easily cycle through colours & effects of the three 120mm ARGB fans included. The Lancool II Mesh RGB also retains many of the characteristic features of the Lancool series such as a sleek, futuristic design & the use of premium materials, including SGCC steel & two tempered glass side panels. The Lancool II Mesh RGB at a glance: Premium Mid-Tower for motherboards up to E-ATX Full mesh front panel for outstanding air flow 3 x 120mm ARGB fans bundled with case Dual tempered glass panels with magnetic closing mechanism Room for up to a total of eight 120mm & eleven 2.5& Prime; SSDs The Lancool II Mesh RGB in detail: The Lancool II is a modern Mid-Tower with a stylish design & excellent cooling performance. It is has a robust steel frame, full mesh front panel & is perfect for RGB illumination. Optimised for airflow This new version of the Lancool II has been optimised for airflow with a large mesh front panel. As well as that the front supports up to three 120- or two 140 mm fans, with the roof supporting two fans up to 140 mm in diameter, one 120mm fan at the back & two 120mm fans about the PSU chamber. Regarding water cooling options, it is possible to install Ai O- & custom water cooling solutions. Up to a 360mm radiator can be fitted to the front & a 240mm radiator can be attached to the top of the case. In order to ensure clean air circulates within the case, Lian Li have included magnetic dust filters, which fit to the top & bottom of the case. Outstanding illumination & interior capacity This particular model of the Lancool II Mesh

Includes:: three 120mm 3-PIN 1300 RPM ARGB fans that can be fitted to the front panel. This fan configuration complements the mesh front panel to create an eye catching effects. These fans are of course digitally addressable & can be controlled via the motherboard or at the touch of the illumination colour or mode buttons on the i/o panel. There is room inside the Lancool II Mesh RGB for many components. Up to an E-ATX motherboard can be installed Two 2.5& Prime; SSDs can be attached to individual mounts to the back of the motherboard tray. The right cover panel accommodates two more 2.5& Prime; drives on the inside. Under the power supply cover there is a drive cage for three 3.5& Prime; or 2.5& Prime; drives. Finally the i/o panel, in addition to featuring illumination controller buttons for the ARGB fans has an audio jack two USB (Universal Serial Bus) 3.0 ports & one (optional) USB (Universal Serial Bus) 3.1 TYPE C port.

...

LANCOOL ONE Digital The Lian Li LANCOOL ONE is an elegantly designed case. It features a brushed aluminium front panel with a distinct diamond shaped air inlet with integrated, addressable RGB LED lighting to create appealing visual effects. The left-side of the LANCOOL ONE has a tempered glass side panel, which lets you display the components you've assembled within the case. Thanks to a convenient snap & lock mechanism the case can be modified without tools. THE LIAN LI LANCOOL ONE AT A GLANCE Striking brushed aluminium front panel with pre-installed addressable RGB LED lighting Robust tempered glass side panel Convenient snap & lock mechanism for installing & removing components Room for up to E-ATX form factor motherboards & plenty of components. THE LIAN LI LANCOOL ONE IN DETAIL The LANCOOL ONE is a Midi Tower case that can hold up to an E-ATX motherboard. Lian Li have made every effort to ensure the LANCOOL ONE has an outstanding design. The case's front panel has a particularly striking look, featuring both a brushed aluminium finish & an unmistakable diamond shaped air inlet, which is illuminated by fully addressable RGB LEDs. Lian Li have further enhanced the Lancool One's look by including a high quality tempered glass side panel. This enables users to display the components they've assembled inside the case. A FULLY FEATURED & EASY TO SET UP CASE The LANCOOL ONE has been designed to be simple to construct & modify. The case has a convenient snap & lock mechanism to easily install & remove components without tools. The Lian Li LANCOOL ONE has extensive connectivity options including space for up to four 2.5" SSDs or two 3.5" HDDs. There are also multiple sockets on the I/O panel, including two USB (Universal Serial Bus) 3.0 ports, HD audio input, an audio jack, & a LED controller. In respect to air cooling, fans can be mounted throughout the case. As standard the case has a 120mm fan on the front & another 120mm fan at the back of the case. Optionally three 120mm fans or two 140mm fans can be installed on the front & three 120mm or two 140mm fans on the roof. The bottom of the case also has room for up to two 120mm fans. If you prefer water cooling, you can install either 120 x 360mm, 120 x 240mm, 120 x 120mm, 140 x 140mm or 140 x 280mm on the front panel. Also on the case's roof, there is room for either 120 x 360mm, 120 x 240mm or 120 x 120mm radiators. There's even space at the back of the case for an additional 120 x 120mm radiator. The Lancool One has a large PSU shroud with space for two PSUs, meanwhile magnetic filters help prevent entry of dust into the case. ...

The Lian Li Lancool One Digital is an elegantly designed case. It features a brushed aluminium front panel with a distinct diamond shaped air inlet with integrated, addressable RGB LED lighting to create appealing visual effects. The left-side of the Lancool One has a tempered glass side panel, which lets you display the components you've assembled within the case. Thanks to a convenient snap & lock mechanism the case can be modified without tools. The Lian Li Lancool One at a glance: Striking brushed aluminium front panel with pre-installed addressable RGB LED lighting Robust tempered glass side panel Convenient snap & lock mechanism for installing & removing components Room for up to E-ATX form factor motherboards & plenty of components. The Lian Li Lancool One in detail: The Lancool One is a full size tower chassis that can hold up to an E-ATX motherboard. Lian Li have made every effort to ensure the Lancool One has an outstanding design. The case's front panel has a particularly striking look, featuring both a brushed aluminium finish & an unmistakable diamond shaped air inlet, which is illuminated by fully addressable RGB LEDs. Lian Li have further enhanced the Lancool One's look by including a high quality tempered glass side panel. This enables users to display the components they've assembled inside the case. A fully featured & easy to set up case: The Lancool One has been designed to be simple to construct & modify. The case has a convenient snap & lock mechanism to easily install & remove components without tools. The Lian Li Lancool One has extensive connectivity options including space for up to four 2.5" SSDs or two 3.5" HDDs. There are also multiple sockets on the I/O panel, including a type-C USB (Universal Serial Bus) 3.1 connector, two USB (Universal Serial Bus) 3.0 ports, HD audio input, an audio jack, & a LED controller. In respect to air cooling, fans can be mounted throughout the case. As standard the case can hold a 120mm fan on the front & another 120mm fan at the back of the case. Optionally three 120mm fans or two 140mm fans can be installed on the front & three 120mm or two 140mm fans on the roof. The bottom of the case also has room for up to two 120mm fans. If you prefer water cooling, you can install either 120 x 360mm, 120 x 240mm, 120 x 120mm, 140 x 140mm or 140 x 280mm on the front panel. Also on the case's roof, there is room for either 120 x 360mm, 120 x 240mm or 120 x 120mm radiators. There's even space at the back of the case for an additional 120 x 120mm radiator. The Lancool One has a large PSU shroud with space for two PSUs, meanwhile magnetic filters help prevent entry of dust into the case. ...

THE LIAN LI LANCOOL ONE AT A GLANCE Striking brushed aluminium front panel with pre-installed RGB LED lighting Robust tempered glass side panel Convenient snap & lock mechanism for installing & removing components Room for up to E-ATX form factor motherboards & plenty of components. THE LIAN LI LANCOOL ONE IN DETAIL The LANCOOL ONE is a Midi Tower case that can hold up to an E-ATX motherboard. Lian Li have made every effort to ensure the LANCOOL ONE has an outstanding design. The case's front panel has a particularly striking look, featuring both a brushed aluminium finish & an unmistakable diamond shaped air inlet, which is illuminated by RGB LEDs. Lian Li have further enhanced the Lancool One's look by including a high quality tempered glass side panel. This enables users to display the components they've assembled inside the case. A FULLY FEATURED & EASY TO SET UP CASE The LANCOOL ONE has been designed to be simple to construct & modify. The case has a convenient snap & lock mechanism to easily install & remove components without tools. The Lian Li LANCOOL ONE has extensive connectivity options including space for up to four 2.5" SSDs or two 3.5" HDDs. There are also multiple sockets on the I/O panel, including two USB (Universal Serial Bus) 3.0 ports, HD audio input, an audio jack, & a LED controller. In respect to air cooling, fans can be mounted throughout the case. As standard the case has a 120mm fan on the front & another 120mm fan at the back of the case. Optionally three 120mm fans or two 140mm fans can be installed on the front & three 120mm or two 140mm fans on the roof. The bottom of the case also has room for up to two 120mm fans. If you prefer water cooling, you can install either 120 x 360mm, 120 x 240mm, 120 x 120mm, 140 x 140mm or 140 x 280mm on the front panel. Also on the case's roof, there is room for either 120 x 360mm, 120 x 240mm or 120 x 120mm radiators. There's even space at the back of the case for an additional 120 x 120mm radiator. The Lancool One has a large PSU shroud with space for two PSUs, meanwhile magnetic filters help prevent entry of dust into the case. ...

Developed in collaboration with renowned overclocker der 8auer, the O11 Dynamic Mini from Lian Li is not only a smaller version of the previous O11 Dynamic case but offers enhanced functionality. This is due to a rear panel that can be adjusted to match the users requirements. By default the full 7 expansion slots are available but this can be adjusted down to just 3 to free up internal space. Meanwhile the power supply, drives & cables are stored in a separate second chamber. All in all the O11 Dynamic Mini is a stylish case, with a compact form in aluminium & tempered glass. The Lian Li O11 Dynamic Mini at a glance: Extremely versatile thanks to a modular back panel Compatible with motherboards with ATX, Micro-ATX or Mini-ITX form factors Front & left side panels made from tempered glass Roof & right side panels made from aluminium I/O panel with a single USB (Universal Serial Bus)-C & two USB (Universal Serial Bus) 3.0 ports Support for graphics cards up to 395mm in length Space for up to nine 120 mm fans Suitable for SFX & SFX-L power supplies The Lian Li O11 Dynamic Mini at a glance: As already mentioned the Lian Li O11 Dynamic Mini is an extremely versatile case, this is due to an innovative back panel, which has expansion slots that can be adjusted depending on users requirements. 7 slot configuration In its full 7 slot configuration installing an ATX motherboard is possible. Fans can be mounted to the roof & there is space beside the motherboard to attach a radiator as well as a second radiator to the bottom of the case. Motherboards: ATX, Micro-ATX, Mini-ITX Expansion slots: 7 Roof: 120 or 140 mm fans (up to 25 mm thick) Side: 280 mm radiator up to 65 mm thick or 240 mm radiator up to 85 mm thick Bottom (ATX): Max. 360 radiator or 120 mm fans Bottom (Micro-ATX/ Mini-ITX): Max. 360/280 radiator or 140 mm fans 5 slot configuration In the 5 slots model a Mini-ITX or Micro-ATX motherboard can be installed. The extra space generated allows for a better cooling solution to be installed. This

Includes:: either a roof mounted 360 or 280 radiator. Motherboards: Micro-ATX, Mini-ITX Expansion slots: 5 Roof: Max. 360 or 280 radiator (up to 65 mm) Side: 280 mm radiator up to 65 mm thick or 240 mm radiator up to 85 mm thick Bottom (Micro-ATX): Max. a 360 radiator or 120 mm fans Bottom (Mini-ITX): Max. a 360 or 280 mm radiator or 140 mm fans 3 slot configuration When set to the 3 slot configuration a full size GPU & Mini-ITX motherboard can be installed. Additional large radiators can be mounted above & below the motherboard. Motherboards: Mini-ITX only Expansion slots: 3 Roof: Max. 360 or 280 radiators (up to 100 mm) Bottom: Max. 360/280 mm radiator (up to 75 mm thick) or 140 mm fans Room for a Powerful Gaming System A 120 mm fan can be mounted to the rear panel. Air inlets at the bottom, roof, & side are equipped with magnetic dust filters, so the interior remains clean. The Lian Li O11 Dynamic Mini accommodates CPU coolers up to 170 mm in height meaning there are virtually no limits when choosing a powerful processor cooler. This case also supports large form factor graphics cards up to 395 mm in length. Hard Drives & PSU options The power supply unit & the storage drives are housed in the right chamber of the O11 Dynamic Mini. The case supports SFX & SFX-L form factor power supplies & offers bays for a total of four drives: 2x 3.5/2.5" & 2x 2.5" Outstanding Design, High quality Materials & Connectivity The Lian Li O11 Dynamic Mini shares the same distinctive, stylish design of all the O11 series cases, with a sturdy steel frame & an aluminium construction for the roof & right side panel. The left side & front panels are made from 4mm thick tempered glass enabling users to showcase their hardware. in addition the ports & buttons integrated into the roof of the Lian Li O11 Dynamic Mini are easily accessible: 2x USB (Universal Serial Bus) 3.0 type-A 1x USB (Universal Serial Bus) 3.1 type-C 1x 3.5 mm audio jack (4-pole) Power button with integrated HDD LED

...

The Features of the Lian Li O11 Dynamic XL Midi-Tower: Premium combination of aluminium, tempered glass & steel Space for E-ATX-, ATX-, Micro-ATX- or Mini-ITX motherboards 6x 2, 5"-SSDs & 4x 3, 5"-HDDs including HDD hot-swap functionality Front panel with 4x USB (Universal Serial Bus) 3.0 Type-A & 1x USB (Universal Serial Bus) 3.1 Type-C Graphics cards up to 44, 6 cm long supported Three slots for 360 mm radiators Fits up to ten 120 mm fans E-ATX Case with Premium Design: Brushed Aluminium Meets Tempered Glass The modular Lian Li O11 Dynamic XL Midi-Tower combines steel with a tinted, tempered glass side panel for superb looks. Lian Li takes things one step further however, & equips the right side panel & roof with 1 mm thick aluminium. The front also

Includes:: stunning tempered glass to allow users an unobstructed view of the cases interior. The right part of the front

Includes:: an I/O panel with a USB (Universal Serial Bus) 3.1 Type-C port, two USB (Universal Serial Bus) 3.0 ports & both obligatory audio ports. Two additional USB (Universal Serial Bus) 3.0 ports are located on the lower right part of the front section. In between the I/O panel & the tempered glass panel lies an attractive RGB-LED strip that stretches from top to bottom
- the lighting of which can be controlled by means of two switches on the front panel. The RGB-LED strip can also be connected to a traditional 5VDG port on compatible motherboards. Abundant Space for Gaming Hardware The Lian Li O11 Dynamic XL Midi-Tower offers a tonne of space for powerful gaming hardware. Even the huge ROG Dominus Extreme EEB motherboard from Asus can be installed with the help of an additional accessory from Lian Li. Graphics cards can be up to 446 mm in length, with CPU coolers up to a height of 167 mm also fitting. An ATX form factor power supply can be installed in an upright orientation in the left side of the rear, power supplies up to 210 mm in length will fit. When it comes to installing Ai O- or custom water cooling, the case has got you covered
- up to three 360 mm radiators can be installed simultaneously: one in the roof, one in the bottom & one next to the motherboard. The right side of the case

Includes:: air vents that help to better dissipate heat produced by your gaming hardware. If you install three 360 mm radiators at the same time, slim radiators should be used in the roof & next to the motherboard. Generally speaking however, a triple-radiator setup is an option here, although it will require close attention to detail when it comes to fitting everything & we recommend checking with the manufacturer beforeh&, particularly when it comes to custom water cooling. The roof of the case provides space for a 280 mm radiator. superb Airflow The radiator slots can of course be filled with fans if you prefer. At the side behind the front section, in the roof & on the bottom, up to three 120 mm fans will fit, & the roof / bottom of the case will support two 140 mm fans instead of three 120 mm fans. For clean & tidy cable management, multiple rubberised cable pass-throughs are available in places such as along the edges of where the motherboard will be seated. The right chamber of the case is where most of the cooler hardware that does not need a great deal of active cooling will go, such as the power supply & storage devices. The Lian Li PC-O11 Dynamic XL Midi-Tower stands slightly raised atop rubberised steel feet, meaning that cool air is able to enter the case through the dust filter in the bottom. Thanks to the chimney effect, warm air travels upwards & consequently exits through the roof
- which is also equipped with a dust filter. Two additional dust filters cover both perforated grilles in the right side section. The elegant Lian Li PC-O11 Dynamic XL Midi-Tower is not only a looker, its more than capable of supporting some serious gaming hardware to make it perfect for PC gaming enthusiasts of all stripes, particularly where water cooling is on the agenda. Massive Drive Capacity In order to install all your storage devices, the case allows two HDD cages to be installed, meaning that four 3, 5" HDDs or four 2, 5" SSDs will fit. The four slots can be reached from the rear of the case, where they are covered by a perforated panel. Three 2, 5" drives can be installed on the reverse of the motherboard tray. in addition, three further 2, 5" slots are available on a bracket to the fore next to the motherboard tray. The bracket can instead be installed on the bottom of the case, creating some space next to the motherboard for a radiator for example. In total, four 3, 5"- & six 2, 5" drives can be mounted. Note: Those wishing to install their graphics card vertically in the Lian Li PC-O11 Dynamic XL Midi-Tower can opt for the Lian Li O11D-1 expansion kit. This is the only kit compatible with the Lian Li O11 Dynamic XL Midi-Tower!. It

Includes:: a compatible slot bracket as well as a premium quality riser cable. Technical

Details: Dimensions: 285 x 471 x 513 mm (W x H x D)

Material: Steel (interior), Aluminium (roof, side, front, feet), tempered glass (front, side) Weight: approx. 10, 1kg

Colour: White, black (HDD cages, gromits, tempered glass frame, dust filters) Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX (EEB with additional expansion kit) Total fans possible: 3x 120 mm / 2x 140 mm (bottom), 3x 120 mm / 2x 140 mm (roof), 3x 120 mm (side, front), 1x 120 mm (rear) Radiator Mountings (forfeits fan slots): 1x max. 360 mm / 280 mm (roof), 1x max. 360 mm / 280 mm (base), 1x max. 360 mm (side, forfeits SDD brackets) Filter: Bottom, roof, side panel Drive bays: 4x 2.5/3.5" drives (internal), 6x 2.5" drives (internal) PSU: 1x ATX (optional) Expansion slots: 8 I/O Panel: 1x USB (Universal Serial Bus) 3.1 Type-C (internal connection), 4x USB (Universal Serial Bus) 3.0 Type-A (internal connection), 1x Audio In/ Out, On-/ Off switch Max GPU length: 446 mm Max CPU cooler

Height: 167 mm Max PSU length: 210 mm


















...

Features of the Lian Li O11 Dynamic XL (ROG Certified) Midi-Tower: Sophisticated combination of aluminium, tempered glass & steel Space for E-ATX-, ATX-, Micro-ATX- or Mini-ITX-form factor motherboards 6x 2.5" SSDs & 4x 3.5" HDDs including HDD Hot Swap function Frontpanel with 4x USB (Universal Serial Bus) 3.0 Type-A & 1x USB (Universal Serial Bus) 3.1 Type-C Supports graphics cards up to 44.6 cm length Three built-in slots for 360 mm radiators Up to ten 120mm fans possible E-ATX Case with Premium Design: Brushed Aluminium Meets Tempered Glass The modular Lian Li O11 Dynamic XL (ROG Certified) Midi-Tower offers a sturdy steel construction & aluminum exterior panels. The left side panel as well as the front cover are made from tempered glass & allow a view into the inside of the case & the installed hardware. The right part of the front panel houses the I/O panel with one USB (Universal Serial Bus) 3.1 Type C port, two USB (Universal Serial Bus) 3.0 ports & two of the now standard audio connectors. Two other USB (Universal Serial Bus) 3.0 ports are located at the right foot of the front panel. An attractive RGB-LED strip is located between the I/O panel & the tempered glass panel. It extends from top to bottom & its illumination can be controlled via two switches on the panel. Optionally, the RGB-LED strip can also be connected to a conventional 5VDG slot of an appropriately equipped motherboard. Plenty of Space for Gaming Hardware The Lian Li O11 Dynamic XL (ROG Certified) Midi-Tower offers plenty of room for powerful gaming hardware. Even Asus huge SSI EEB mainboard ROG Dominus Extreme can be installed using an optional Lian Li expansion rail. Graphics cards may be up to 446 millimeters long, CPU coolers may have a height of 167 millimeters. An ATX power supply unit is installed towards the rear bottom left & may be 210 millimetres in length. For the installation of an Ai O or custom water cooling, the case offers the possibility of accommodating up to three 360 mm radiators simultaneously: One in the roof, one at the bottom & one next to the motherboard. The right side panel also has ventilation slots to dissipate the heat. If you want to install three 360 mm radiators at the same time, you should use narrow ones in the lid & a slim radiator next to the motherboard. In general, the installation of three triple radiators is possible, but this requires some attention when choosing components for custom water cooling. There is also the option to install a 280 mm radiator in the roof. Excellent Airflow for Next-Level Cooling The radiator slots can, of course, also be fitted with fans. On the side behind the front, on the lid & on the bottom there may be up to three 120s, on the roof & on the bottom there can be two 140s instead of three 120s should you prefer. For clean cable management there are several partly rubberised cable bushings available, which are placed alongside other things on the middle plate next to the motherboard. The right chamber accommodates hardware that emits less or no heat & that does require specialist cooling, such as the power supply unit & the HDD drives. The Lian Li O11 Dynamic XL (ROG Certified) Midi-Tower stands slightly elevated on rubberized steel feet to allow cool air to pass through the dust filtered bottom of the case & into the enclosure. The chimney effect causes warm air to rise to the top, where it escapes through the roof, which is also fitted with a dust filter. Two further dust filters cover the two perforated grids in the right side. The elegant Lian Li O11 Dynamic XL (ROG Certified) Midi-Tower is not only a real eye-catcher & can easily accommodate gaming hardware, it also happens to be ideal for PC enthusiasts who want to cool their hardware with a custom loop. Drives: Up to 10 Storage Devices can be Mounted in the Case! For mounting the drives, there are two HDD cages in which four 3.5-inch HDDs or four 2.5-inch HDDs/SSDs can be accommodated. The four slots are accessible from the rear of the case & are covered by a perforated panel. Three 2.5-inch drives can also be mounted on the rear of the motherboard tray. In addition, there are three more 2.5-inch slots on a bracket at the front next to the motherboard tray. Instead, the bracket can also be attached to the floor, for example to make room for a radiator or the optional expansion rail next to the board. A total of four 3.5-inch & six 2.5-inch data drives can be mounted. ...

The evolution continues, with the Lian Li O11D EVO PC Case. Taking modular to the next level, this mid-tower chassis can be configured to one of two modes – Normal or Reverse. On top of this, there are multiple positions for I/O panel to be placed, & three orientations for your GPU. Choose from horizontal, vertical, or even upright to fully show off your gaming hardware. Thanks to the mesh panels & spacious interior, airflow has been maximised to the extreme & there is ample support for either Ai O or custom water cooling. Plus, with its intelligent dual-chamber design, cable management is easy & the interior will stay looking sleek. LIAN LI O11D EVO PC CASE BLACK AT A GLANCE: Modular aluminium mesh & tempered glass PC case designed with de 8aur Accommodates up to an E-ATX motherboard Two configuration modes: Normal & Reverse Mode Choose from three GPU positions: standard, vertical*, or upright* Extreme airflow & support for custom water-cooling Can hold up to nine SSDs with included brackets * Require additional hardware. MODULAR TO THE MAX The Lian Li O11D range is known for its modular innovations. The latest O11D EVO takes modularity to the next level. In addition to the easy to remove panels, this mid-tower case can be configured in one of two modes: Normal & Reverse. Whether your desk set-up is skewed to the left or right, you can create the perfect showcase gaming PC. Thanks to the hassle-free design, it only takes a few simple steps to arrange the Lian Li O11D EVO into Reverse Mode. The top & bottom panels can be switched & the whole case flipped, putting your hardware to the left-hand side of the case rather than the traditional right. Creating complete flexibility, there are five accessories available to purchase separately, which support additional options, two of which are panels for the chassis. Firstly, there is a front mesh panel (O11DE-4X) that can be used in lieu of the tempered glass to maximise airflow. There is also a top panel with integrated I/O panel (O11DE-5X), should you keep your PC tower under the desk & require easy access. Further supporting the utmost flexibility, there are three places to install the I/O panel. By default, it is placed between the feet on the bottom of the front panel. Alternatively, the I/O can be installed to the front of the left panel or the rear of the right panel (in Reverse mode). What’s more, there is an additional I/O panel accessory (O11DE-3X) that can be mounted to one of the unused areas alongside the standard panel. This provides an extra three USB (Universal Serial Bus) ports, maximising connectivity. The final two accessories are PCIe riser cables for alternative orientations for your graphics card. FLEXIBLE HARDWARE Thanks to the spacious, dual-chamber interior, the Lian Li O11D EVO PC Case can accommodate for all your gaming hardware in a number of configurations. Able to support up to an E-ATX motherboard, this chassis has 8 expansion slots. With the tempered glass side panel, you can create a truly show-stopping gaming PC. To start with, this chassis

Includes:: an anti-sag bracket & can host a GPU up to 422m long – in one of three positions. In addition to the traditional horizontal configuration, you can install the graphics card vertically or upright. This can be achieved with the vertical (O11DE-1X) & upright (O11DE-2X) PCIe riser cable kits. In the vertical orientation, your GPU can be placed with either a 50mm or 90.5mm clearance from the bottom panel. In either position, there is ample space for Ai O water cooling loops. Opting for the upright GPU fully showcases your high-end hardware, as well as maximising airflow. For holding your extensive gaming library & more, up to nine storage drives can be installed in the Lian Li O11D EVO thanks to the included brackets. You can integrate up to nine SSDs or a combination of six HDDs & three SSDs. This innovative case features mounting points throughout the chassis to create the most comprehensive storage solution. The side drive tray holds either four 2.5” or two 3.5” drives, whilst the cable management bar can host two 2.5” drives, plus a Lian Li & der 8auer plaque! These can both be found in the second, smaller chamber behind the main chamber, along with the drive cage. This can hold either three 2.5” drives or two 3.5” & one 2.5” drive, with the option to mount a 60mm fan to enhance cooling. Lastly, the bottom fan bracket can hold four SSDs or two HDDs within the front chamber. The drive cage & bottom fan bracket do have alternative uses, should nine storage drives be more than you could ever need. The drive cage can double up as a PSU shroud, meaning there is potential for two power supplies to be installed. Models can be up to 220mm in length. Naturally, the bottom fan bracket can be also utilised for your thermal solution, either for fans or a radiator depending on your cooling preference. EXTREME AIRFLOW OR CUSTOM COOLING Keeping your options open, the Lian Li O11D EVO PC Case is compatible with both air & water cooling. Depending on how you configure certain hardware & panels will dictate the best cooling solution for your build. If you opt for the front mesh panel & upright GPU, then the Lian Li O11D EVO is going to have phenomenal airflow. With a fine mesh, these panels have been optimised for thermal performance as well acting as dust filters. The upright GPU allows unprecedented & direct airflow to the graphics card & CPU, that can be further boosted by three 120mm fans. Alternatively, the upright GPU placement also allows for amazing customisation for water cooling. Simpler & more efficient tubing can reach hardware without restriction, which in turn helps the radiators to perform more effectively. Should you prefer vertical or, the more traditional, horizontal mounting, then Ai O cooling is the best option. There is support for three radiators & up to ten fans across the chassis. In both Normal & Reverse modes, up to a 360mm radiator can be mounted on the top, side, & bottom, with the latter two having support for 280mm models, also. Depending on radiator size, up to three 120mm or two 140mm fans can be installed in the same areas, with the tenth being a 120mm fan on the rear. DUAL-CHAMBER, SLEEK INTERIOR Utilising the innovative, dual-chamber design, cable management is incredibly easy within the Lian Li O11D EVO. There is even a cable management bar as part of the second chamber, allowing you to neatly bundle cables together & feed them through the rubber grommets on the separating panel. This chamber features everything you need to keep cables under control, including a hook & ties. Not only does this design keep your PC interior looking sleek, but keeping the PSU separate helps to keep temperatures down. Overall, the Lian Li O11D EVO PC Case has a sleek & modern design. The main structure is manufactured with stainless steel whilst the exterior panelling is either brushed aluminium, mesh, or tinted tempered glass. Contributing to the smooth aesthetic, the power button wraps around two edges of the chassis, whilst the reset & RGB buttons remain on the side. This incredible case is available in three colours, with this model being the black version. Inside & out, this PC case has a classic & iconic look. RGB LED STRIP Completing this versatile case, is an RGB LED strip on the front panel. Simple, yet sophisticated, the Lian Li O11D EVO lighting can be set as one of seven effects, via the “M” button located on the right-side panel. (Or left in Reverse mode.) An eighth lighting mode can be unlocked, via compatible motherboard software or when connected to L-Connect control. This can be achieved with a Lian Li UNI HUB.

...

LIAN LI O11 AIR PC-011 AIR AT A GLANCE Designed with award winning PC modder der 8auer Dual chamber case Excellent airflow properties thanks to support for up to twelve 120mm fans Eye-catching plastic grill front-panel, looks great & offers outstanding cooling Plenty of room for installing storage, can hold up to six 2.5” SSDs or three 3.5” HDDs. THE LIAN LI O11 PC-011 AIR IN DETAIL The Lian Li PC-O11 AIR has been designed with enthusiasts in mind. Lian Li worked with renowned PC modder der 8auer to create a stylish & attractive case that is also optimised for performance. The Lian Li PC-O11 AIR is a tower case & can hold a motherboard up to E-ATX configuration. At its core is a dual chamber enclosure. This helps greatly with cable management & to keep your build neat & tidy. This is particularly useful as Lian Li have included a tempered glass side panel so you can show off your components. The front of the case features a prominent plastic grill that stretches from the front panel to the case's roof. The grill looks great with any LED lighting installed internally being visible & is very practical. It allows for serious airflow with room for up to twelve 120mm fans, which can be distribute across the case's front, bottom & roof panels as well as beside the motherboard. Lian Li have considered the details, they have included two 120mm PWM fans & there is room for multiple storage options such as up to six 2.5” SSDs or three 3.5” HDDs. The front facing I/O panel

Includes:: two USB (Universal Serial Bus) 3.0 Type-A ports & one USB (Universal Serial Bus) 3.1 Type-C port.

...