First Kolink released The Stronghold, now they release its compact little brother, The Stronghold M. Black with a brushed finish, this is the same no-nonsense case with slightly smaller

Dimensions. The convex side panel & dedicated PSU shroud facilitate great cable management, creating ample room for all your high-end gaming hardware. One improvement on the original design is the two integrated 120mm PWM fans, that enable dynamic cooling. Whether you opt for air- or water-cooling system, this sleek case will make a great host for your gaming PC. THE FEATURES OF THE KOLINK STRONGHOLD M MICRO-ATX CASE AT A GLANCE: Compact, Micro-ATX version of bestseller Stronghold Accommodated Micro-ATX or Mini-ITX motherboards Two integrated 120mm PWM fans with support for up to four more Great hardware support, including up to 330mm long GPUs & 160mm tall CPU coolers Features magnetic dust filters Better cable management with convex side panel & PSU shroud Perfect for no-nonsense builds STRONGHOLD, BUT COMPACT The Kolink Stronghold is one of their best-selling cases. Now, they offer a compact version, the Kolink Stronghold M. A budget-friendly case, this Micro-ATX case is great for fans of no-nonsense, small form factor builds. Whilst it largely features the same Stronghold aesthetic, such as the tempered glass side panel & black interior, this version has integrated two 120mm PWM fans as standard. GAMING HARDWARE The Kolink Stronghold M Micro-ATX Case may be small, but it still offers plenty of support for all the latest gaming hardware. Naturally, this case can accommodate either a Micro-ATX or Mini-ITX motherboard & features four expansion slots. Graphics cards can be up to 330mm in length whilst CPU coolers can be up to 160mm tall. With its careful layout, dedicated PSU shroud & convex side panel, cable management in the Kolink Stronghold M is easy to maintain. The interior of your gaming PC will be just as sleek as the exterior with this case. COOLING With the Kolink Stronghold M there is support for either air- or water-cooling. The two integrated fans are placed on the front panel & on the rear. There is space for two more 120mm fans on the front as well as on the top panel. Alternatively, a 240mm radiator can be mounted on the front with ample support for & Ai O system. Thanks to the magnetic dust filters on the top & bottom keeping your gaming PC clean is much easier. Plus, these filters are detachable for more convenient maintenance. POWER & STORAGE Within the dedicated PSU shroud, there is ample space for a standard ATX power supply & a myriad of storage drive bays. For HDDs, there are two slots which support either 3.5” or 2.5” drives, whilst there are two additional 2.5” slots for SSDs. With flexible options for both maximising space & speed, the Kolink Stronghold M Micro-ATX Case can more than accommodate your gaming library. For connecting peripherals, the I/O Panel features three USB (Universal Serial Bus) ports & an HD audio port. COMPACT FOOTPRINT Measuring just 185mm x 400mm x 385mm, the Kolink Stronghold M is a compact case which is ideal for placing under your desk. Plus, as it is manufactured from a mix of steel, plastic, & tempered glass, this case is lightweight yet durable, weighing roughly 4.2kg.

...

Kolink is pleased to introduce the incredibly stylish Stronghold Midi-Tower with its fantastic tempered glass side panel & white front panel. The capacious interior of the Stronghold allows for plenty of space for high-end hardware. Pre-installed dust filters, plenty of space for water cooling & superb cable management options are just some of the highlights of this case stunning, yet competitively-priced, Kolink case. The robust chassis consists of one millimetre thick SECC steel & is equipped with a four millimetre thick tempered glass side panel & a plastic front with a stylish white front panel. The entire interior is coated in white & equipped with a power supply shroud to achieve an incredibly clean aesthetic. A hard drive cage with brackets for three 3.5- or 2.5" drives is also included. In order to give the installed hardware the best possible airflow, the case comes with two of a total of six possible 120 mm fans with Molex connectors. One is placed at the lowest of three potential places behind the front, the second at the slot in the back. Two additional 120 mm fans can be installed under the top of the case. The motherboard tray & the power supply cover offer numerous openings for perfect cable management. A 240 mm radiator can be installed in the front & in the top of the Observatorys chassis. The air inlets come with fine dust filters in the roof & base of the chassis. They can be removed without tools & are strengthened with the help of a filigree honeycomb pattern. Graphics cards up to 38 cm are compatible along with CPU coolers up to 16 cm in height. in addition the front of the case comes with an I/O panel including two USB (Universal Serial Bus) 2.0 connectors & a USB (Universal Serial Bus) 3.0 Type-A port. There is also a slot for a switch to control the RGB lighting, but this is not included in the housing & must be retrofitted separately. ...

Kolink is pleased to introduce the incredibly stylish Stronghold Midi-Tower with its fantastic tempered glass side panel & brushed aluminium-look front. The capacious interior of the Stronghold allows for plenty of space for high-end hardware. Pre-installed dust filters, plenty of space for water cooling & superb cable management options are just some of the highlights of this case stunning, yet competitively-priced, Kolink case. The Features of the Kolink Stronghold at a Glance Case designed for motherboards up to E-ATX Side panel in 4 mm thick tempered glass Plastic brushed aluminium-look front 2x pre-installed 120 mm fans, 6 total possible I/O Panel with 2x USB (Universal Serial Bus) 2.0 / 1x USB (Universal Serial Bus) 3.0 & HD Audio In/ Out Support for two 240 mm radiators 3x 3.5/2.5" drive slots Graphics cards up to 38 cm long & CPU coolers up to 16 cm height Tempered Glass Side Panel & Two Pre-Installed Fans The robust chassis consists of one millimetre thick SECC steel & is equipped with a four millimetre thick tempered glass side panel & a plastic front with a stylish brushed aluminium look. The entire interior is coated in black & equipped with a power supply shroud to achieve an incredibly clean aesthetic. A hard drive cage with brackets for three 3.5- or 2.5" drives is also included. In order to give the installed hardware the best possible airflow, the case comes with two of a total of six possible 120 mm fans with Molex connectors. One is placed at the lowest of three potential places behind the front, the second at the slot in the back. Two additional 120 mm fans can be installed under the top of the case. Dust Filters Keep the Kolink Stronghold Clean The motherboard tray & the power supply cover offer numerous openings for perfect cable management. A 240 mm radiator can be installed in the front & in the top of the Observatorys chassis. The air inlets come with fine dust filters in the roof & base of the chassis. They can be removed without tools & are strengthened with the help of a filigree honeycomb pattern. Graphics cards up to 38 cm are compatible along with CPU coolers up to 16 cm in height. in addition the front of the case comes with an I/O panel including two USB (Universal Serial Bus) 2.0 connectors & a USB (Universal Serial Bus) 3.0 Type-A port. There is also a slot for a switch to control the RGB lighting, but this is not included in the housing & must be retrofitted separately. Technical

Details: Dimensions: 201 x 435 x 435 mm (W x H x D)

Material: Steel, Tempered Glass Weight: approx. 5.75kg

Colour: Black Form Factor: E-ATX (up to 279 mm wide), ATX, Micro-ATX, Mini-ITX Total Possible Fans: 3x 120 mm (Front) 2x 120 mm (Top) 1x 120 mm (Rear) Pre-Installed: 1x 120 mm Molex (Front) 1x 120 mm Molex (Rear)





...

he newest addition to the Stronghold range, the Kolink Stronghold Overseer offers A superbly comprehensive set of features for an attractive pricepoint. Equipped with a pair of 12cm PWM fans, the Overseer has space for ATX motherboards, 340mm VGA cards both horizontally, or vertically using a PCI-E riser cable (sold separately), 175mm CPU coolers & both 360mm radiators on the front panel, plus 280mm radiators on the top panel. With a side panel made fully of tempered glass, the Stronghold Overseer ticks all the boxes & then some! Features Front vented aluminium effect panel with 2 x pre-installed 12cm PWM fans (front & rear) Tempered glass side panel for unobstructed view of the interior Designed for ATX/ Micro-ATX-/ Mini-ITX motherboards Dual-Slot Vertical GPU Support (Up to 2.5 slot compatible)
- riser cable sold separately Support for radiators up to 360mm in the front & 280mm at the top I/O Panel with 2x USB (Universal Serial Bus) 3.0 & 1x USB (Universal Serial Bus) 2.0, HD Audio Graphics cards up to 340 mm supported, CPU coolers up to 175 mm, PSUs up to 190 mm Kolink Stronghold Overseer
- A wealth of features The Kolink Stronghold Overseer comes with a pair of 12cm PWM fans installed as standard. These fans offer both good performance & low noise, & can be automatically speed controlled through connecting them to your motherboards PWM headers. The vented aluminium effect front panel also contributes to the good airflow of the case. Users are also free to install a 360 mm radiator in the front, plus a 280mm radiator in the roof. Aside from the pre-installed fans, users are also free to install two more 120/140mm fans in the roof, & two 120mm fans at the front. The roof is where a magnetic dust filter can be found installed on the honeycomb-style mesh. A full tempered glass side panel shows off your system build, & is secured with 4 thumbscrews. The Kolink Stronghold Overseer: Ready for Hardware The interior comes entirely in black, with a PSU shroud that only adds to the sleek & unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5& Prime; HDDs in the HDD cage provided. Alternatively, 2.5& Prime; SSDs can be installed here, or next to the motherboard. The motherboard tray & PSU shroud both offer numerous openings for optimum cable management, with up to 34mm cable management space. Underneath the case is a removable dust filter suitable for an ATX PSU up to 190mm. Graphics cards can be up to 340mm long, mounted both horizontally or indeed vertically using the supplied GPU mount & a PCI-E riser cable (sold separately). CPU coolers up to 175mm tall are also supported. in addition, the I/O panel located at the front possesses one USB (Universal Serial Bus) 2.0 ports as well as a pair of USB (Universal Serial Bus) 3.0 Type-A ports.

...

The latest in the Kolink Stronghold range is an absolute dream for a RGB lovers. With four integrated Kolink Umbra a RGB fans, the Kolink Stronghold Prism Mid-Tower Case is going to light up your gaming environment. Featuring a screwless design, this chassis is user-friendly with removable panels – including the top – & a hinged tempered glass panel to make installing hardware easier than ever. Able to accommodate up to an E-ATX motherboard, 330mm long GPU, & 165mm tall CPU cooler, this ATX case is perfect for all your high-end hardware. THE FEATURES OF KOLINK STRONGHOLD PRISM MID-TOWER CASE AT A GLANCE: Mid-Tower case with steel framework, metal & plastic panels, & a hinged tempered glass panel Features the iconic Kolink hexagonal mesh cut-outs for comprehensive ventilation Screwless & user-friendly design for easy installation Four Kolink Umbra a RGB PWM 120mm fans with Kolink Core controller included Support for multiple radiators in an Ai O cooling loop Accommodates up to an E-ATX motherboard, 330mm long GPU, & 165mm tall CPU cooler I/O panel placed to the side of the top edge for better cable management SCREWLESS DESIGN A core tenant of the Kolink Stronghold Prism Mid-Tower Case is its user-friendly design. With no screws included, all the mesh metal & plastic panels are removable, including the top, & the tempered glass panel is hinged. Utilising the magnetic pull tab, the glass panel opens fully granting you better access to the case’s interior. By removing the panels, this accessibility is increased. Utilising the mid-tower form factor its full extent, the Kolink Stronghold Prism can accommodate up to an E-ATX motherboard & sports seven expansion slots. For the absolute best in gaming performance, this case can host a graphics card up to 330mm long, which covers most of the models currently available. in addition, there is clearance for a CPU cooler up to 165mm tall. Thanks to its carefully curated design, the Kolink Stronghold Prism can support all your high-end gaming hardware. LIGHTING & COOLING With the inclusion of Kolink Umbra a RGB fans, the Kolink Stronghold Prism dazzles & cools in equal measure. The tempered glass panel is perfect for showcasing all your lighting, making this an excellent choice for fans of RGB. Effects & colours can be set utilising your motherboard, connecting via 3-pin a RGB headers, or by the included Kolink Core controller. 12 LEDs circle the outer edge with a further 9 LEDs highlighting the fan casing. Each fan sports nine curved blades & spins up to 1500RPM, boosting the natural airflow from the mesh panels. Supporting this thermal performance further, there are three places to mount radiators. There is capacity for up to a 360mm mounted to the front, up to a 240mm on the top, & up to a 120mm radiator at the rear. Thanks to the spacious layout, the Kolink Stronghold Prism is primed for use with Ai O cooling systems & can accommodate multiple radiators at once. GUNMETAL GREY Located at the bottom of the Kolink Stronghold Prism is the ventilated PSU shroud, capable of holding a power supply up to 190mm long. Next to this is a storage drive bay, that holds two 2.5” SSDs & two 2.5” or 3.5” HDDs. This grants amazing flexibility when it comes to your storage solution, allowing you to maximise capacity & speed potential. Completing the sleek & classic look, the Kolink Stronghold Prism Mid-Tower Case is finished in gunmetal grey. The top face of the chassis features the I/O panel, to the side of the mesh design, to facilitate better cable management. Including a USB (Universal Serial Bus) 3.1, two USB (Universal Serial Bus) 2.0 ports, & one HD audio jack, this I/O panel features everything you need to connect your peripherals. ...

The Kolink Unity Adapt represents an exciting new chapter in the Kolink story. This mid-tower case’s features a full ARGB front panel that can be swapped out to another attractive design if desired. The Kolink Unity Adapt also

Includes:: a wealth of premium features & functions throughout. THE FEATURES OF KOLINK UNITY ADAPT ARGB MID-TOWER CASE AT A GLANCE: Full ARGB front panel with dual ventilation cut-outs The front panel can be replaced with alternative designs (sold separately) Included 120mm Umbra Void rear ARGB/PWM fan with infinity mirror effect Front 120mm PWM fan for enhanced airflow Option to sync to motherboard software provided as standard Quick-release tempered glass side panel Triple-slot vertical GPU mount-ready Designed for E-ATX, ATX, Micro-ATX & Mini-ITX motherboards Support for radiators up to 420mm at the front, 360mm at the top, & 140mm at the rear I/O Panel with 1 x USB3.2 Gen 2 Type-C, 2x USB3.0 & 1x USB2.0, HD Audio & RGB button Graphics cards up to 415mm supported, CPU coolers up to 180mm, PSUs up to 250mm A NEW ERA IN QUALITY The Kolink Unity Adapt is the first model in the Kolink range to offer the option of replacing the front panel design entirely, giving the user more choice of customisation. Several panels are available to purchase separately; the Kolink Unity Adapt Meridian panel, the Kolink Unity Adapt Skyscape panel, & the Kolink Unity Adapt Quasar panel. Plus, more will be added over time. Each design was created with the addressable RGB lighting in mind, providing an attractive result no matter which you choose. Adding to the addressable RGB on the front panel, the Kolink Unity Adapt also features a Kolink Umbra Void 120mm ARGB PWM fan at the rear, alongside a Kolink Classic 120mm PWM fan at the front. As well as the pre-installed fans, users are also free to install a further two 120mm or three 140mm fans on the front panel, plus three 120/140mm fans in the roof. A 140mm fan can also be installed at the rear if preferred. There is support for up to a 420mm radiator on the front panel, 360mm on the top panel & 120/140mm radiator support at the rear. ENTHUSIAST-GRADE The interior of the Kolink Unity Adapt comes entirely in black, with a PSU shroud that adds to the sleek & unobtrusive look. Behind the shroud is where you’ll find space for a pair of 3.5" HDD’s. Alternatively, 2.5" SSDs can be installed here. There is also space for a pair of 2.5” drives on the back of the motherboard plate, using the removable brackets provided. Underneath the case is a removable dust filter suitable for an ATX PSU up to 250mm. A full, quick release, tempered glass side panel shows off your system build in style. Graphics cards can be up to 415mm long, or 345mm if using a 45mm thick radiator & 25mm thick fans. CPU coolers up to 180mm tall are also supported. Up to triple-slot GPUs can be also installed vertically, using the supplied mount & a compatible Kolink PCI-E riser cable sold separately. in addition, the side-mounted I/O panel located at the front possesses 1 x USB3.2 Gen 2 Type-C, 1 x USB (Universal Serial Bus) 2.0 port as well as 2 x USB (Universal Serial Bus) 3.0 Type-A ports & HD-Audio connectors. These feed directly behind the motherboard plate for easier cable management.

...

The Kolink Unity Code X is an impressive showcase built for high-end PC systems. The tried & tested dual chamber design is capable of supporting a plethora of air or water cooling hardware while maintaining a clean & stylish aesthetic. The front of Unity code X is adorned with attractive ARGB lighting & provides a great view of installed hardware through the dual tempered glass side panels. The Unity Code X provides performance & a pleasing design at a great price point. The Features of the Kolink Unity Code X Case at a Glance: The latest edition to the brand new Unity series Innovative dual chamber design High-quality Umbra Void 120mm ARGB fan included ARGB lighting synchronises with compatible hardware Capable of supporting up to 10 fans & 3 x 360mm radiators Dual tempered glass side panels for a clear view Bracket included for Vertical GPU Support
- riser cable sold separately Excellent value for your money Scores 10/10 on Aesthetics & Quality The Kolink Unity X combines premium materials with a stylish design. This must-have case has several features that make it the ideal choice to showcase spectacular high-end hardware. The attractive dual tempered glass panels display internal components which are framed by customisable RGB lighting. The front panel is accented with a strip of lighting which can be adjusted using buttons on the case or connected to a compatible ARGB motherboard to create an impressive synchronised light show. Additional lighting comes from the included 120mm ARGB Umbra Void PWM fan at the rear of the case. There is also the option to install up to 10 RGB fans for the ultimate light show. The dual-chamber design separates the attractive front view from the rear where there is ample space for unsightly cables & storage drives. With the Kolink Unity X, it’s straightforward to build the ultimate showcase style PC. X Marks the Spot The Kolink Unity X is the must-have case for creating an impressive enthusiast-grade PC. The Midi tower size & intelligent design mean there is ample space for the latest high-performance hardware & best in class cooling components. The mid-tower size & dual chamber design provide space for up to a 400mm graphics card which can be vertically mounted. The included bracket has been specifically designed to offset the graphics card away from the glass & provide optimal airflow. There is ample room for high-end water cooling but for more simple builds there is clearance for up to a 165mm CPU cooler. It comes with support for ATX, Micro-ATX & ITX motherboards & in the secondary chamber, there is mounting for 2 x 3.5” hard drives & 2 x 2.5” solid-state drives. Finally, the Front I/O panel has great connectivity with 2 x USB (Universal Serial Bus) 3.0 ports, 1 x USB (Universal Serial Bus) 2.0 port & headset/microphone audio ports. 10 Times the Cooling Performance The Kolink Unity Code X is a premium chassis with a spacious interior that allows for an impressive air or water cooling setup. The Unity X is the only case in the Kolink lineup that is capable of housing triple 360mm radiators. This makes it perfect for water cooling enthusiasts looking to create the ultimate custom loop with room for a pump & reservoir combo. As the Code X name suggests there is the option to mount up to a total of 10 x 120mm fans. This ensures excellent airflow & cooling performance. Fans can be mounted with 3 x 120mm in the side, top & base with space for 1 x 120mm in the rear. This provides even ventilation across all parts of the case & a stunning aesthetic if RGB fans are used. Finally, to keep the interior clean & prevent dust build-up, both the roof & base of the case have removable dust filters for easy cleaning.
...

The Kolink Unity Nexus represents an exciting new chapter in the Kolink story. This mid-tower case’s features a full ARGB front panel that can be swapped out to another attractive design if desired. The Kolink Unity Nexus also

Includes:: a wealth of premium features & functions throughout. THE FEATURES OF KOLINK UNITY NEXUS ARGB MID-TOWER CASE AT A GLANCE: Full ARGB front panel with ample side ventilation The front panel can be replaced with alternative designs (sold separately) Included 120mm Umbra Void rear ARGB/PWM fan with infinity mirror effect Front 120mm PWM fan for enhanced airflow Option to sync to motherboard software provided as standard Quick-release tempered glass side panel Triple-slot vertical GPU mount-ready Designed for E-ATX, ATX, Micro-ATX & Mini-ITX motherboards Support for radiators up to 420mm at the front, 360mm at the top, & 140mm at the rear I/O Panel with 1 x USB3.2 Gen 2 Type-C, 2x USB3.0 & 1x USB2.0, HD Audio & RGB button Graphics cards up to 415mm supported, CPU coolers up to 180mm, PSUs up to 250mm A NEW ERA IN QUALITY The Kolink Unity Nexus is the first model in the Kolink range to offer the option of replacing the front panel design entirely, giving the user more choice of customisation. Several panels are available to purchase separately; the Kolink Unity Nexus Landscape panel, the Kolink Unity Nexus Radial panel, & the Kolink Unity Nexus Vector panel. Plus, more will be added over time. Each design was created with the addressable RGB lighting in mind, providing an attractive result no matter which you choose. Adding to the addressable RGB on the front panel, the Kolink Unity Nexus also features a Kolink Umbra Void 120mm ARGB PWM fan at the rear, alongside a Kolink Classic 120mm PWM fan at the front. As well as the pre-installed fans, users are also free to install a further two 120mm or three 140mm fans on the front panel, plus three 120/140mm fans in the roof. A 140mm fan can also be installed at the rear if preferred. There is support for up to a 420mm radiator on the front panel, 360mm on the top panel & 120/140mm radiator support at the rear. ENTHUSIAST-GRADE The interior of the Kolink Unity Nexus comes entirely in black, with a PSU shroud that adds to the sleek & unobtrusive look. Behind the shroud is where you’ll find space for a pair of 3.5" HDD’s. Alternatively, 2.5" SSDs can be installed here. There is also space for a pair of 2.5” drives on the back of the motherboard plate, using the removable brackets provided. Underneath the case is a removable dust filter suitable for an ATX PSU up to 250mm. A full, quick release, tempered glass side panel shows off your system build in style. Graphics cards can be up to 415mm long, or 345mm if using a 45mm thick radiator & 25mm thick fans. CPU coolers up to 180mm tall are also supported. Up to triple-slot GPUs can be also installed vertically, using the supplied mount & a compatible Kolink PCI-E riser cable sold separately. in addition, the side-mounted I/O panel located at the front possesses 1 x USB3.2 Gen 2 Type-C, 1 x USB (Universal Serial Bus) 2.0 port as well as 2 x USB (Universal Serial Bus) 3.0 Type-A ports & HD-Audio connectors. These feed directly behind the motherboard plate for easier cable management.

...

Unique design & superior functionality: these are the characteristics that Kolink elected to define their new Void Midi-Tower. Not to say it doesnt deliver in the looks department, its front has a V-shaped cut-out equipped with digitally addressable RGB-LED strips, the effect of which is taken up another notch thanks to the use of the infinity mirror effect. A rear mounted pre-installed 120mm fan, which is also kitted out with digitally addressable RGB-LEDs, cool & illuminates the spacious interior of this exceptionally stylish Midi-Tower. The hardware you choose to install is also put on show: the tempered glass side panel leaves little to the imagination. All in all, the Kolink Void sets itself apart with its use of modern yet functional design. THE FEATURES OF THE KOLINK VOID AT A GLANCE V-Shaped cut-out with infinity mirror effects & RGB lighting Tempered glass side panel for unobstructed view of the interior Designed for ATX-/ Micro-ATX-/ Mini-ITX motherboards A pre-installed 120mm fan with digitally addressable RGB lighting Support for radiators up to 240mm in the front I/O Panel with 2x USB (Universal Serial Bus) 3.0 & 2x USB (Universal Serial Bus) 2.0, HD Audio, RGB-LED controller PSU shroud with air inlets for a cleaner look Graphics cards up to 310 mm supported, CPU coolers up to 160 mm, PSUs up to 180 mm KOLINK VOID: EXQUISITE DESIGN MEETS HIGH PERFORMANCE The digitally addressable RGB-LED strips, the effect of which is heightened with Kolinks bold move to integrate a kind of infinity mirror effect into the case, can be controlled via a switch on the I/O panel. This also holds true for the rear-mounted 120mm fan that comes pre-installed. Alternatively, the strips & the fans can be hooked up & controlled using a compatible motherboard thanks to its use of a standard 3-pin (5VDG) connector. This then allows the RGB-LED button to be used as a reset button instead. The tempered glass side panel allows users to enjoy a panoramic view of the lighting used inside the Kolink Void. Aside from the pre-installed fans, users are also free to install five more 120mm fans, three of which can be installed in the front & two more in the roof. This is where a magnetic dust filter can be found installed on the honeycomb-style mesh. The side-facing air inlets on the front & in the PSU shroud also contribute to the excellent airflow of the case. As an alternative to fans, users are free to install a 240 mm radiator in the front. THE KOLINK VOID: MORE THAN ENOUGH SPACE FOR HARDWARE The interior comes entirely in black, with a PSU shroud that only adds to the sleek & unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDDs, using a drop & lock system to secure. Alternatively, 2.5" SSDs can be installed here, or directly on top of the PSU shroud. The motherboard tray & PSU shroud both offer numerous openings for optimum cable management. Underneath the case is a removable dust filter appropriate to an ATX-form factor PSU, which can itself be up to 18 cm in length. Graphics cards can be up to 31 cm long & CPU coolers up to 16 cm tall. in addition, the I/O panel located at the front possesses two USB (Universal Serial Bus) 2.0 ports as well as two USB (Universal Serial Bus) 3.0 Type-A ports. ...

The Kolink Void Rift is a brand new case in the Void lineup. It features an impressive Infinity mirror that incorporates the entire front panel. The rectangular design is illuminated with rows of ARGB LEDs. Choose from a selection of dazzling effects or synchronise with other components for an eye-catching look. in addition, this vibrant case has plenty of options for installing powerful hardware & plenty of cooling components. The Void Rift is a brilliant well-rounded chassis for both gamers & hardware enthusiasts. THE FEATURES OF THE KOLINK VOID RIFT CASE AT A GLANCE: The latest edition to the popular Kolink Void line-up Stand out Infinity mirror front panel with ARGB lighting Umbra Void 120mm ARGB fan comes pre-installed ARGB compatible allows synchronization with other components Support for high-end hardware & water cooling Tempered glass side panel gives a clear view of the interior Option to vertically mount a GPU
- riser cable sold separately Front I/O has great USB (Universal Serial Bus) & Audio connectivity STAND OUT INFINITY MIRROR DESIGN: The Kolink Void Rift has a beautiful infinity mirror front panel. This makes it a great case for RGB lovers who want to showcase high-end components. The rectangular glass front panel is illuminated by multiple ARGB LEDs that appear to go on forever when combined with the infinity mirror effect. The lighting colours can be adjusted using the handy buttons on the top of the case or synchronised with compatible ARGB hardware for a stunning effect. Also included with the Void Rift is a matching RGB infinity mirror fan. The 120mm Umbra Void is also ARGB & PWM which can be synchronised to match the rest of the case & create a coordinated light show. The Void Rift has an edge to edge tempered glass side panel that allows a full view of the internal components neatly highlighted by the RGB lighting. The painted black interior & full-length PSU shroud ensure any unsightly cables & storage drives are hidden from view. This makes it easy to create a neat PC you will want to show off. in addition, there is a generous amount of room to route cables &, the multiple well-placed cutouts make cable management straightforward. Finally, for maximum visual impact, there is the option to vertically mount a dual-slot GPU (PCIe riser cable available separately). This is ideal for showcasing large impressive graphics cards with attractive RGB coolers. EXCELLENT HARDWARE SUPPORT: The main feature of the Kolink Void Rift is the stand out front panel design. However, this PC case will also house high-end PC hardware. The mid-tower size supports the latest components with space left over for plenty of cooling. The spacious interior will fit tall 165mm CPU coolers & there is also room for 355mm graphics cards. Motherboard support is extensive & most form factors are supported. This

Includes:: ATX, Micro-ATX- or Mini-ITX models. Behind the PSU shroud, there is great support for storage & you can install up to 2 x 3.5 hard drives & 4 x 2.5 solid-state drives. Finally, the Front I/O panel has two fast USB (Universal Serial Bus) 3.0 ports, a single USB (Universal Serial Bus) 2.0 port & HD Audio connections. INCREDIBLE COOLING PERFORMANCE: To keep internal components cool while gaming the Kolink Void Rift has several features that ensure adequate airflow & efficient cooling. To the side of the glass front panel, there are long vents that allow air to enter & pass through the front fans. The front of the case can support 3 x 120mm or 3 x 140mm fans. The top of the case has room for 2 x 120mm or 2 x 140mm fans &, the rear comes with a high end 120mm Umbra Void fan. For even more cooling the Rift Void has all the space & mounting options required for a water cooling set-up. You will find mounting space for up to a 360mm radiator which is plenty for the majority of powerful AIO coolers. Finally, to make maintenance a breeze & prevent dust from building up around fans, both the roof & base of the case have removable dust filters.


...