Renowned for their innovative & high-performance cases, Kolink has now brought the new Ethereal Midi-Tower to market, representing a feature-rich gaming case that offers an abundance of space beneath its stylish exterior for all the powerful gaming hardware you could want. The tempered glass side door will allow users to enjoy an unobstructed view of their high-end gaming setup complete with compatibility for E-ATX motherboards. Given the use of tempered glass, aesthetics are important, & a PSU shroud cleverly conceals unsightly cables. The front of the case has the appearance of brushed aluminium, almost indistinguishable from the real thing, & this accentuates the stylish exterior overall
- with the digitally addressable RGB-LED strip only adding to the cases impressive aesthetics. A switch on the I/O panel enables lighting control. Alternatively, the lighting strip can also be connected directly to the motherboard & controlled there if you prefer. A fine mesh with integrated dust filter in the roof of the case helps keeps your hardware clean & dust-free. A pre-installed 120mm fan provides more than adequate airflow. Features Stylish Midi-Tower supporting up to E-ATX motherboards Tempered glass side panel with hinges Brushed aluminium-look front Smart digitally addressable RGB lighting on the front One pre-installed 120mm fan on the rear Up to five 120mm- & four 140mm fans possible Space for graphics cards up to 380mm, CPU coolers up to 160mm tall I/O Panel with controller for RGB-LEDs, 1x USB (Universal Serial Bus) 3.1 Type C, 1x USB (Universal Serial Bus) 3.0 und 2x USB (Universal Serial Bus) 2.0 Kolink Ethereal: Plenty of Space for Powerful Gaming Hardware Even though the cases

Dimensions correspond to those of a Midi-Tower, the Ethereal utilises its ingenious design to enable support for E-ATX motherboards. Even graphics cards measuring up to 380 mm will enjoy plenty of space towards the front of the case. Most CPU coolers measuring up to 160mm in height will also fit with space to spare. The implementation of a smart shroud helps conceal the PSU & HDD cage, in which users are free to install two 3.5"- or two 2.5" drives. To the rear of the motherboard lies a bracket offering support for two more 2.5" SSDs. Those who prefer to opt for air cooling will be pleased to know that there are plenty of mounting points for 120mm fans. The front allows for the installation of two 120mm- or two 140mm fans. The roof allows for either two 120mm- or two 140mm fans. The roof of the case is equipped with a mesh that helps ensure maximum airflow with a minimum of unwanted dust. This is also possible in no small part thanks to the smart use of dust filters, meaning that the cases interior will rarely need special cleaning. A single 120mm occupies a slot at the back of the case. The front of the case supports a 280mm radiator, & of course the rear fan can be replaced with a 120mm radiator if you prefer. Tempered Glass & RGB-LEDs: Get Your Hardware Looking Great Thanks to Kolinks clever choice of locations for the cases cable guides & brackets, users can look forward to a strikingly smart & clean-looking case. The spacious interior can be admired from the outside thanks to the cases use of a tempered glass side door, which of course uses hinges to make opening & closing the case a breeze. A strip of digitally addressable RGB-LEDs is attached to the side of the brushed aluminium front. A switch on the I/O panel is responsible for controlling them, along with their accompanying lighting effects. Alternatively, the strip can also be connected & controlled directly to the mainboard. Then the RGB switch on the I/O panel can also be used as a reset button. In addition to the RGB/ Reset switch, there is also a USB (Universal Serial Bus) 3.1 Type C slot, a USB (Universal Serial Bus) 3.0 slot & two USB (Universal Serial Bus) 2.0 ports, as well as 3.5 mm sockets for headphones & microphone, & finally a power & HDD-LED.


...

The Kolink Horizon is an impressive Midi Tower case with several unique features. The cases tinted tempered glass side & front panels are particularly striking. The dark tinted glass creates a distinct look that is even better when combined with the four colourful RGB fans Kolink have bundled with the case. The side panel has a slightly curved shape. Rather than being a standard glass panel, the lower end has been partially tapered off, which leaves room on for additional vents to improve airflow. The Kolink Horizon at a glance: Tinted tempered glass side & front panels Bundled with four 120mm rainbow dual ring fans, addressable via a fan hub controller Curved side panel for optimal airflow The Kolink Horizon in detail: The Kolink Horizon is a Midi Tower case with a striking design. It

Includes:: tinted tempered glass front & side panels, which look especially good when paired with RGB LED fans. The case is bundled with four 120mm Dual Ring Rainbow RGB fans. These plug into a fan hub controller, which is controlled via either a button on the I/O panel or an included remote control. A range of cooling & connectivity options: Aside from its impressive appearance, the Kolink Horizon features a range of useful & practical elements. For instance, there are many possibilities when it comes to cooling. Air cooling being served by four pre-installed RGB Ring Fans (three in the front & one in the back). However you can also install two additional 120mm fans on the cases roof & a further two 120mm fans in the base. For those who prefer water cooling, radiators of up to 360mm can be fitted to the front of the case while a 120mm radiator can be installed at the back. The Kolink Horizon offers many options in respect to connectivity, there is an I/O panel that features two USB (Universal Serial Bus) 3.0 ports, along with an audio jack & one USB (Universal Serial Bus) 2.0 port. in addition there is space internally for two 2.5"/3.5" HDD/SSD bays & three 2.5" HDD/SSD bays. The Kolink Horizon features great support for components including room for up to 345mm VGA cards, 160mm CPU coolers & 240mm PSUs. Specifications Model: Horizon RGB Black Type: Midi Tower Case

Colour: Matte Black with Ring RGB LEDs & tempered glass front & side panels Case

Material: 0.6mm Steel/ Tempered Glass Power Supply Orientation: Bottom Motherboard Support: ATX/ Micro-ATX/ Mini-ITX Internal 3.5" Bays: 2 Internal 2.5" Bays: 5 (2 x 2.5"/3.5" combo) Expansion Slots: 7





...

Kolink Inspire K1 Mid Tower Gaming Case
- Black Designer case compatible with motherboards up to ATX Acrylic glass side panel &
...

Kolink gave the Inspire K2 something that helps it stand out from the crowd: the front is equipped with a striking design as well as an RGB-LED strip which can be controlled via the motherboard or the I/O panel. Together, the front is reminiscent of a printed circuit board or a scene from one of the Tron films. The almost invisible recesses also serve to allow fresh air into the case. The tinted tempered glass side panel offers users a view of the interior, specifically of the Micro-ATX motherboard. Naturally this Micro-ATX case supports powerful hardware & plenty of drives that would combine to make this an exceptional gaming system. This makes the Kolink Inspire K2 one of the ideal cases for gamers on the lookout for something with great value & an eye for unusual designs. The Kolink Inspire K2 Micro-ATX Case at a Glance:
- Strikingly shaped front with RGB lighting
- Tempered glass side panel & PSU slot in the top
- Space for 1x 120mm fan in the front & 1x 92mm fan in the back
- Space for graphics cards up to 320mm & CPU coolers up to 150mm
- I/O Panel with one USB (Universal Serial Bus) 3.0, one USB (Universal Serial Bus) 2.0 & RGB-LED controls
- Light & easy to transport at just 3, 9kg value Micro-ATX Case from Kolink for Gamers The Kolink Inspire K2 is an extremely affordable Micro-ATX case that is, in style terms, oriented more towards gamers. It can fit graphics cards up to 32cm in length. What is particularly striking about it however, is the front with its angular aesthetics as well as its PCB-inspired look complete with cutouts to help draw air into the case. The look of the front is accentuated by the addition of semi-transparent strips, behind which lies an RGB-LED strip. At the top towards the front lies the USB (Universal Serial Bus) 2.0- & USB (Universal Serial Bus) 3.0 connection as well as RGB lighting controls that can alternatively be controlled via a 4-pin cable to the motherboard. A tinted, tempered glass side panel helps to round out the stylish design of the Inspire K2 ab. The interior of the case provides space for Micro-ATX or Mini-ITX motherboards. Graphics cards can be up to 320mm long, & CPU coolers are limited to 150mm, meaning that there is more than adequate space for mainstream coolers. In terms of cable management, the cover on the right side is curved to provide that bit of extra space. The front allows for a 120mm fan. There is space for a 92 mm fan at the back. Towards the top/front of the case lie two slots, the top one can hold a 3, 5- or 2, 5" drive. Under this, in the second slot, there is space for a 2, 5" SSD. At the bottom, users have the option of installing another 3, 5- or 2, 5" drive.





...

INSPIRE L1 ARGB LED STRIP
- 30CM Kolink has cultivated a reputation for producing high-quality products at affordable prices. Part
...

The Inspire K11 is an amazing Mid-Tower from Kolink. It represents the latest model in the Inspire line. What makes the K11 unique is its impressive front pane that integrates an array of a RGB enabled strips. However, it has many great features such as the inclusion of a Kolink Umbra a RGB PWM 120mm fan. THE KOLINK INSPIRE K11 AT A GLANCE: Great value Mid-Tower Eye-catching design Umbra a RGB PWM 120mm fan included Support for 360mm radiators at the front & 240mm radiators at the top THE KOLINK INSPIRE K11 IN DETAIL: The design & build quality are what sets the K11 apart from other Mid-Tower PC cases. In fact, it represents particularly good value at its price point with a solid steel frame, front panel & tempered glass panel that lets you display your gaming components in style. Its RGB illumination is especially noteworthy. The steel front panel consists of several elements, including a single a RGB strip to the side & several smaller strips beside it to create an eye-catching effect. These look great alongside the pre-installed rear Umbra ARGB PWM 120mm fan. As they are all a RGB, they can be controlled directly via the motherboard or compatible third-party controller. AMPLE ROOM FOR HARDWARE As a Mid-Tower, the K11 has space for the latest hardware. A full ATX motherboard can be mounted with room for a GPU up to 315mm long plus a CPU cooler up to 165mm high. Thermal performance is also outstanding. In addition to the pre-installed Umbra ARGB PWM 120mm fan, three 120mm fans can be mounted to the front, two on top, & another two above the PSU shroud. Alternatively, there is room in the front for a 360mm radiator & a 240mm in the top, should you want to integrate liquid cooling. Connecting additional fans is easy since any 3-pin 5V devices can be daisy-chained to Umbra ARGB PWM 120mm fan. As far as storage is concerned, there is capacity for 2 x 2.5"/3.5" + 2 x 2.5 drives. The I/O panel has two 2.0 & one 3.0 USB (Universal Serial Bus) ports, as well as an audio in/out jack & power button. ...

Kolink gave the Inspire K2 ARGB something that helps it stand out from the crowd: the front is equipped with a striking design as well as an ARGB-LED strip which can be controlled via the I/O panel. Together, the front is reminiscent of a printed circuit board or a scene from one of the Tron films. The almost invisible recesses also serve to allow fresh air into the case. The tinted tempered glass side panel offers users a view of the interior, specifically of the Micro-ATX motherboard. Naturally this Micro-ATX case supports powerful hardware & plenty of drives that would combine to make this an exceptional gaming system. This makes the Kolink Inspire K2 ARGB one of the ideal cases for gamers on the lookout for something with great value & an eye for unusual designs. Features Strikingly shaped front with ARGB lighting Tempered glass side panel & PSU slot in the top Space for 1x 120mm fan in the front & 1x 92mm fan in the back (pre-installed) Space for graphics cards up to 320mm & CPU coolers up to 150mm I/O Panel with one USB (Universal Serial Bus) 3.0, one USB (Universal Serial Bus) 2.0 & RGB-LED controls Rear 92mm Fan pre-installed Light & easy to transport at just 3.9kg value Micro-ATX Case from Kolink for Gamers The Kolink Inspire K2 ARGB is an extremely affordable Micro-ATX case that is, in style terms, oriented more towards gamers. It can fit graphics cards up to 32cm in length. What is particularly striking about it however, is the front with its angular aesthetics as well as its PCB-inspired look complete with cutouts to help draw air into the case. The look of the front is accentuated by the addition of semi-transparent strips, behind which lies an ARGB-LED strip. At the top towards the front lies the USB (Universal Serial Bus) 2.0- & USB (Universal Serial Bus) 3.0 connection as well as RGB lighting controls. A tinted, tempered glass side panel helps to round out the stylish design of the Inspire K2 ARGB. The interior of the case provides space for Micro-ATX or Mini-ITX motherboards. Graphics cards can be up to 320mm long, & CPU coolers are limited to 150mm, meaning that there is more than adequate space for mainstream coolers. In terms of cable management, the cover on the right side is curved to provide that bit of extra space. The front allows for a 120mm fan. There is space for a 92 mm fan at the back. Towards the top/front of the case lie two slots, the top one can hold a 3, 5- or 2, 5" drive. Under this, in the second slot, there is space for a 2, 5" SSD. At the bottom, users have the option of installing another 3, 5- or 2, 5" drive. ...

Kolink gave the Inspire K3 ARGB something that helps it stand out from the crowd: the front is equipped with a striking "X" design as well as two ARGB-LED strips which can be controlled via the motherboard (3 Pin) or I/O panel. The side cutouts serve as air inlets & dust filters. The tempered glass side panel offers owners a view of the interior, specifically of the Micro-ATX or Mini-ITX motherboard that has been installed. The Micro-ATX case offers support for powerful hardware & plenty of drives to make creating your perfect gaming system a breeze. This makes the Kolink Inspire K3 one of the best cases out there for gamers on the lookout for a deal but that have an eye for exceptional design. Features Striking front panel with ARGB lighting Tempered glass side panel & PSU slot in the top Space for 1x 120 mm fan at the front & a preinstalled 1x 92mm fan in the back Space for GPUs up to 320 mm long & CPU coolers 150 mm tall I/O Panel with one USB (Universal Serial Bus) 3.0, one USB (Universal Serial Bus) 2.0 & ARGB-LED controls Light & easy to carry at just 3, 9kg Affordable Micro-ATX Case from Kolink for Gamers The Kolink Inspire K3 is an extremely affordable Micro-ATX case that is, in style terms, oriented more towards gamers. It can fit graphics cards up to 32cm in length. What stands out about it in particular is the use of transparent strips in the shape of an "X" that is illuminated via two ARGB-LED strips. The side-mounted vents help ensure your components receive plenty of airflow, & at the top towards the front lie the USB (Universal Serial Bus) 2.0- & USB (Universal Serial Bus) 3.0 connections as well as ARGB lighting controls
- although this can also be controlled via a 3-pin cable to the motherboard if needed. A tinted, tempered glass side panel rounds out the stylish design of the Kolink Inspire K3. The interior offers support for a Micro-ATX- or Mini-ITX motherboard. The case also supports graphics cards up to 320 mm long, & CPU coolers up to 150 mm in height
- more than enough space for most common models. The right side offers plenty of space for cable management due to its shape. The front allows for a 120 mm fan. The back has a 92 mm fan pre-installed. Towards the top/front of the case lie two slots, the top one can hold a 3, 5- or 2, 5" drive. Under this, in the second slot, there is space for a 2, 5" SSD. At the bottom, users have the option of installing another 3, 5- or 2, 5" drive.

...

The Inspire K5 Midi-Tower from Kolink has now introduced their long awaited Inspire range: The front has received a unique one-of-a-kind design complete with a digitally addressable RGB-LED strip, which can be controlled either via the I/O panel or via a 3-pin connector on a compatible motherboard. The RGB-LED strip illuminates the striking design adorning the front of the panel. The side-facing cutouts on the front serve to effectively improve airflow while doubling as dust filters. The tinted, tempered glass side panel affords users an unobstructed view into the interior, meaning you can enjoy a view of your high-end ATX motherboard. Moreover, this Midi-Tower design is more than capable of supporting an array of powerful hardware along with plenty of drives to ensure you can create the exact gaming system you desire complete with the necessary power to back it up. All in all, this makes the Kolink Inspire K5 into the ideal case for those who wish to save money where possible, but without compromising on an attractive design. Features Strikingly attractive front with RGB lighting Side panel in tinted, tempered glass with PSU shroud Space for a 240 mm radiator in the front Space for graphics cards up to 310 mm in length & CPU coolers up to 160 mm I/O Panel with one USB (Universal Serial Bus) 3.0, one USB (Universal Serial Bus) 2.0, audio ports & RGB-LED controller Affordable ATX Case from Kolink for Gamers The Kolink Inspire K5 is a very affordable Midi-Tower which is designed for gamers that appreciate style & attractive design as well as performance. Graphics cards up to 31 cm in length are supported. What is especially striking is the front panel, with its opaque stripe that is illuminated by means of a digitally addressable RGB-LED strip
- thereby giving the case a unique look. The side-mounted grills ensure a more than adequate airflow. At the top of the case towards the front, users will find the I/O panel with both a USB (Universal Serial Bus) 2.0 port along with a single USB (Universal Serial Bus) 3.0 port as well as a controller for digitally addressable RGB lighting, although as an alternative this can also be connected via a 3-pin cable directly to the motherboard. A tinted, tempered glass side panel rounds out the stylish design of the Kolink Inspire K5. The interior offers space for ATX, Micro-ATX- or a Mini-ITX motherboard of your choosing. Graphics cards can be up to 31I0 mm in length, while CPU coolers enjoy 160 mm of space, more than enough for most current models. When it comes to cable management, the right side cover has a curve to it in order to bring offer additional space. The front allows for three 120 mm fans to be installed. The rear has space for one 120 mm fan. There can also be 2 x 120mm fans installed on the PSU shroud. Water cooling is likewise well catered for, a 360 mm radiator can be installed in the front & the rear has space for a 120mm radiator. Behind the shroud supports two 3, 5- or 2, 5" drives, & the rear of the motherboard tray has space for two additional 2, 5" drives should you require the extra storage capacity.
...

Introducing a one-of-a-kind design: the Kolink Inspire K5 ARGB Mid-Tower Gaming PC Case. A long-awaited addition to the Inspire range, the Kolink K5 is a truly unique mid-tower chassis. The front panel features an addressable RGB-LED strip, along with a rear 120mm ARGB fan. Both can be controlled via the I/O panel or a compatible motherboard’s 3-pin connector. Adorning the front panel, the stunning ARGB-LED strip will illuminate your display with dazzling colours. What’s more, the side-facing cut-outs not only optimise airflow, but double as dust filters as well. Granting a beautiful view into the inside of this mid-tower case is a tinted tempered glass side panel, offering an amazing overview of the high-end hardware which this case supports. For those seeking an affordable mid-tower gaming PC case, with no compromise on style or power, the Kolink Inspire K5 ARGB Chassis is a no-brainer. THE FEATURES OF KOLINK INSPIRE K5 ARGB AT A GLANCE: Mid-tower case with controllable ARGB lighting Integrated 120mm ARGB fan on the back panel Tinted tempered glass side panel along with a PSU shroud Supports radiators up to 240mm in length Accommodates CPU coolers up to 160mm in height Can accommodate GPUs up to 310mm in length I/O panel with USB (Universal Serial Bus) 3.0 & USB (Universal Serial Bus) 2.0 ports, ARGB-LED button, & audio ports SLEEK ARGB STRIP & GLASS SIDE PANEL The Kolink Inspire K5 ARGB Mid-Tower Case is manufactured for gamers who appreciate elegance as well as performance. Upon first glance, the visually striking front panel dazzles the senses, courtesy of the unique opaque strip illuminated by digitally addressable RGB-LED lighting. The included 120mm ARGB fan placed in the rear of the case shines through the Kolink Inspire K5’s tinted glass side panel, letting you peek & marvel at your beautiful, sophisticated set-up. For seamless command of your ARGB lighting, your controller can be connected to the I/O panel’s USB (Universal Serial Bus) 3.0 or USB (Universal Serial Bus) 2.0 port. Alternatively, a 3-pin cable can be used to connect your lighting directly to your motherboard. PERFORMANCE & COOLING Premium hardware support & an abundance of cooling options make the Kolink Inspire K5 ARGB Mid-Tower Gaming PC Case a must-have. Able to accommodate ATX, Micro-ATX, or Mini-ITX motherboards, the chassis can also host graphics cards up to 310mm in length. Along with fantastic GPU support, the Kolink Inspire K5 has space to host CPU coolers up to 160mm in height. In addition to the included rear 120mm ARGB fan, the front of the case allows for a further three 120mm fans to be installed for exquisite airflow. This is enhanced even further by the case’s side-mounted grills. Moreover, two more 120mm fans can be equipped to the PSU shroud, so you can be assured your power supply will be supplied with sustainable cooling. Do you prefer water cooling? Because the Kolink Inspire K5 has you covered. Not only can a 240mm radiator be installed in the case’s front, but a 120mm radiator can be connected to the rear as well. CABLE MANAGEMENT & STORAGE Complementing its gorgeous exterior, the Kolink Inspire K5 offers exquisite cable management. Utilising the side cover’s curve, you’ll enjoy the extra space to store your cables & keep your interior tidy. Behind this mid-tower case’s PSU shroud, there is also support for two 3.5” HDDs or two 2.5” SSDs. For even more high-speed gaming capacity, two supplementary 2.5” drives can be installed at the rear of the motherboard tray. Overall, the Kolink Inspire K5 presents style, optimal cooling, & functionality – all with the power to back it up. ...