Storage Capacity: 2 GB: 2 x 1 GB Upgrade Type: Generic Type: DRAM Technology: DDR3 SDRAM Form Factor: DIMM 240-pin Memory Speed: 1600 MHz (PC3-12800 ) Latency Timings: CL9 Data Integrity Check: Non-ECC RAM

Features: Unbuffered Module Configuration: 128 x 64 Supply Voltage: 1.65 V Lead Plating: Gold Compatible Slots: 2 x memory
- DIMM 240-pin


...

Value RAM is Kingstons value-priced line of industry-standard, generic memory intended for customers who have white box or ...

Specification Capacity: 2GB Upgrade Type: Generic Technology: DDR3 SDRAM Form Factor: DIMM 240-pin Memory Speed: 1333 MHz (PC3-10600 ) Data Integrity Check: Non-ECC Latency Timings: CL9

Features: Black heatsink, unbuffered Supply Voltage: 1.5 V Lead Plating: Gold Warranty: Limited lifetime Manufacturer warranty

...

Value RAM is Kingstons value-priced line of industry-standard, generic memory intended for customers who have white box or ...

Value RAM is Kingstons value-priced line of industry-standard, generic memory intended for customers who have white box or ...

Value RAM is Kingston's value-priced line of industry-standard, generic memory intended for customers who have white box or ...

Kingston 2GB 1333 M Hz DDR3 Non-ECC CL9 SODIMM SR X16 Memory DESCRIPTION This document describes Value RAM's 256M x 64-bit (2GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM) 1 Rx 16, memory module, based on four 256M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 204-pin SODIMM uses gold contact fingers. The electrical & mechanical specifications are as follows: FEATURES JEDEC standard 1.5V (1.425V ~1.575V) Power Supply VDDQ = 1.5V (1.425V ~ 1.575V) 667 M Hz f CK for 1333 Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 9, 8, 7, 6, 5 Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C Asynchronous Reset PCB: Height 1.180” (30.00mm), single sided component SPECIFICATIONS CL (IDD) 9 cycles Row Cycle Time (t R Cmin) 49.125ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 36ns (min.) Maximum Operating Power 1.050 W* UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC


...

Value RAM is Kingstons value-priced line of industry-standard, generic memory intended for customers who have white box or ...

Kingston 2GB 1333 M Hz ECC Single Rank Module Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Kingston 2GB 1333 M Hz Reg ECC Single Rank Module Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...