Flex mounts are needed to attach Strobies products to your flash unit. Fitting a flex Mount could not be simpler. The flex mount is correctly fitted when the flash gun cannot be pushed any further inside the flex mount & is flush with the central hole of the flex mount. Colour gels may be fitted inside the Flex for creative effects. You do not need to use any glue, rubber bands or velcro on the flex mounts, they stay in place when properly installed. Front mounting clips on the mount allow quick attachment of Strobies products allowing you to change from a beauty dish to a snoot in seconds.

Features:. Fits snugly on flash unit without velcro, glue, or rubber bands. Needed to fit Strobies products to your flash unit. Easy to install. Also available. Interfit Strobies Flex Mount for Canon 580EX/550EX SGM400. Interfit Strobies Flex Mount for Canon 580EX11 SGM700. Interfit Strobies Flex Mount for Lumo Pro LP160/ Promaster 7500EDF (SGM800). Interfit Strobies Flex Mount for Nikon SB600/SB800 SGM100. Interfit Strobies Flex Mount for Nikon SB700 (SGM900). Interfit Strobies Flex Mount for Nikon SB900 + filter drawer SGM600F. Interfit Strobies Flex Mount for Nikon SB900 SGM600. Interfit Strobies Flex Mount for Sony F32X/ Canon 430EX SGM200. Interfit Strobies Flex Mount for Sony F56AM/ Nikon SB26/27/28 SGM300. Interfit Strobies Flex Mount for Vivitar 285 SGM500

...

The Interfit SGM200 Flex Mount is for the Canon 430EX & Sony HVL-F32X on-camera flash units. The Flex Mount is an integral part of the Strobies series of flash light shapers. There are several light shapers that attach to the Flex Mount. A Snoot, Barndoor Set, Softbox, Honeycomb Grids, & Bounce Cards are available separately. ...

Flex mounts are needed to attach Strobies products to your flash unit. Fitting a flex Mount could not be simpler. The flex mount is correctly fitted when the flash gun cannot be pushed any further inside the flex mount & is flush with the central hole of the flex mount. Colour gels may be fitted inside the Flex for creative effects. You do not need to use any glue, rubber bands or velcro on the flex mounts, they stay in place when properly installed. Front mounting clips on the mount allow quick attachment of Strobies products allowing you to change from a beauty dish to a snoot in seconds.

Features:. Fits snugly on flash unit without velcro, glue, or rubber bands. Needed to fit Strobies products to your flash unit. Easy to install. Also available. Interfit Strobies Flex Mount for Canon 580EX/550EX SGM400. Interfit Strobies Flex Mount for Canon 580EX11 SGM700. Interfit Strobies Flex Mount for Lumo Pro LP160/ Promaster 7500EDF (SGM800). Interfit Strobies Flex Mount for Nikon SB600/SB800 SGM100. Interfit Strobies Flex Mount for Nikon SB700 (SGM900). Interfit Strobies Flex Mount for Nikon SB900 + filter drawer SGM600F. Interfit Strobies Flex Mount for Nikon SB900 SGM600. Interfit Strobies Flex Mount for Sony F32X/ Canon 430EX SGM200. Interfit Strobies Flex Mount for Sony F56AM/ Nikon SB26/27/28 SGM300. Interfit Strobies Flex Mount for Vivitar 285 SGM500

...

This is an Interfit SGM500 Flex Mount for the Vivitar 285HV on-camera flash. It is an integral part of the Strobies series of flash light shapers. There are several light shapers that work with the Flex Mount. A Snoot, Barndoor Set, Softbox, Honeycomb Grids, & Bounce Cards are available separately. The Flex Mount is correctly fitted when your flash cannot be pushed any further inside it & is flush with the central hole. ...

The Interfit STR118 Flexi Adapter Arm with Hot Shoe permits use of your shoe mount flash in unconventional places & at different angles. Add an additional hotshoe flashgun to an INT273 Reflector arm kit to enable you to create a reflected light source which will be softer than when compared to the flashgun being placed directly in front of your subject. Picture here shows the flexi arm clamped on to the Light stand of the 5 in 1 reflector arm kit INT273. The clamp can be used on a door or bookcase, the flexi arm is 30cm (12") long, & the jaws can be used on arms or shelves up to 35mm (1_") in thickness. ...

Sony/ Minolta cameras do not have a standard hotshoe on the top of the camera, so we are providing our own. The Interfit Strobies Hotshoe means that you can fit many useful accessories such as standard infrared triggers & radio triggers. In addition, the built-in STR114 adaptor enables you to use your camera with Interfit Studio lighting kits. ...

The i Sync 4 has four independent radio channels for use where multiple photographers may be using wireless triggers such as at a wedding etc. You can set the channel & keep on shooting without interference from other photographers. A major benefit of the receivers is the ability to switch between optical triggering or wireless triggering: Optical triggering is similar to your in built sync cell on your studio flash heads & can allow a greater distance to be used when using infrared triggers such as the Interfit INT411 or receiving white light from a second head. Ideal for extending the range where the flash may not be received by your in built sync cells. Wireless triggering when used with the radio trigger on your camera allows out of sight flash triggering or around walls & most obstacles up to a maximum distance of 30 mtrs (100 feet). Each receiver has a built in light stand tread on the bottom to allow your speedlite to be stand mounted. In addition a PC sync cable & socket is included along with a mono jack converter to fit both large & small jack sync sockets for connecting to studio lighting. Runs on long life lithium batteries (included). ...

The Beauty dish will give a soft uniform light source, ideal when combined with a reflector or other Strobies products to add a fill light. When coupled with an optional Flex Mount for your on-camera flash, it provides that unique theatrical, but soft light that many photographers seek to provide for their portrait studies. You can use the Beauty dish as a reflector by removing the central disk to create a hard or long though light source. ...

The Interfit Strobies Modi-Lite Reflector/ Beauty Dish for Flashgun (STR186) is part of the Interfit Strobies Modilite system. The standard reflector is a multi purpose design allowing the beauty dish & Interfit Strobies Modi-Lite Honeycomb for Flashgun STR184 (sold separately) to snap into place in seconds. The beauty dish is ideally placed around four feet from the subject either camera mounted or on a boom arm. Supplied with transparent SNAP on disc to allow light to pass though or interchangeable with soft gold for a warm tone or silver for neutral looking effects. This is designed to work with the Interfit Strobies Uni-Mount (Sold Separately). ...

The Interfit Strobies Modi-Lite Uni-Mount is at the heart of the Modi-Lite system. It is designed to fit a wide range of flashguns & the unique locking system means that you can attach it without the need for Velcro, rubber bands etc. The Uni-Mount can fit flashgun heads with a maximum width of up to 78 mm & a height of between 30 mm & 58 mm. by simple adjustment of the thumbscrews. A whole range of add-on Modi-Lite accessories can then easily be attached to your flashgun. Note accessories designed for the Strobies Flex Mount cannot be used with the Uni-Mount. ...