Intel 730 Series 240GB 2.5in SATA 6 Gb/s SSD Specifications Essentials Capacity 240 GB Lithography Type 20nm Performance Sequential Read (up to) 550 MB/s Sequential Write (up to) 270 MB/s Random Read (8GB Span) (up to) 86000 IOPS Random Write (8GB Span) (up to) 56000 IOPS Latency
- Read 50 µs Latency
- Write 60 µs Power
- Active 3.8W Power
- Idle 1.5W Reliability Vibration
- Operating 2.17 GRMS (5-700 Hz) Max Vibration
- Non-Operating 3.13 GRMS (5-800 Hz) Max Shock (Operating & Non-Operating) 1, 000 G (Max) at 0.5 msec Operating Temperature Range 0°C to 70°C Endurance Rating (Lifetime Writes) 50GB Writes/ Day Mean Time Between Failures (MTBF) 2, 000, 000 Hours Uncorrectable Bit Error Rate (UBER) <1 sector per 10^17 bits read Warranty Period 5 yrs Package Specifications Weight 72 grams ± 2 grams Form Factor 2.5" 7mm Interface SATA 3.0 6 Gb/S Advanced Technologies Enhanced Power Loss Data Protection No Hardware Encryption AES 256 bit – High Endurance Technology (HET) No Temperature Monitoring & Logging Yes End-to-End Data Protection No





...

Performance Unleashed Performance optimized 3rd Generation Intel controller with Intel Data Center DNA The Intel Solid-State Drive 730 Series delivers uncompromised performance by combining factory tuned components with Data Center DNA. Maximize your computing experience with the Intel SSD 730 Series built with a specially qualified 3rd generation Intel controller, 20nm NAND & optimized firmware. Intel has taken storage a step further by factory overclocking these components to push the limits of performance with a 50% increase in controller speed & 20% increase in NAND bus speed. Intel SSD 730 Series are optimized for the most demanding tasks including digital content creation, video capture/editing, extreme gaming & other client usages where storage performance improves the user’s experience & efficiency. Applications will benefit from the 50µs read latency, up to 550MB/s sequential reads & 89, 000 IOPs random reads. 730 Series + Intel Rapid Storage Technology = Amazing Performance Digital Content Creation experts & PC Enthusiasts know the highest storage performance is achieved with RAID-0 configurations as SSDs saturate the SATA interface. Comparing two 730 Series drives in a RAID-0 array to a single alternative SSD, results in the same capacity & nearly double the performance. As shown below, two 730 Series drives in a RAID-0 configuration can provide throughput numbers exceeding 1000MB/s when coupled with Intel platforms supporting Intel Rapid Storage Technology. Similarly four 730 Series drives in a RAID-0 array with an Intel chipset based platform can provide performance exceeding 1500MB/s. ...

Performance Unleashed Performance optimized 3rd Generation Intel controller with Intel Data Center DNA The Intel Solid-State Drive 730 Series delivers uncompromised performance by combining factory tuned components with Data Center DNA. Maximize your computing experience with the Intel SSD 730 Series built with a specially qualified 3rd generation Intel controller, 20nm NAND & optimized firmware. Intel has taken storage a step further by factory overclocking these components to push the limits of performance with a 50% increase in controller speed & 20% increase in NAND bus speed. Intel SSD 730 Series are optimized for the most demanding tasks including digital content creation, video capture/editing, extreme gaming & other client usages where storage performance improves the user’s experience & efficiency. Applications will benefit from the 50µs read latency, up to 550MB/s sequential reads & 89, 000 IOPs random reads. 730 Series + Intel Rapid Storage Technology = Amazing Performance Digital Content Creation experts & PC Enthusiasts know the highest storage performance is achieved with RAID-0 configurations as SSDs saturate the SATA interface. Comparing two 730 Series drives in a RAID-0 array to a single alternative SSD, results in the same capacity & nearly double the performance. As shown below, two 730 Series drives in a RAID-0 configuration can provide throughput numbers exceeding 1000MB/s when coupled with Intel platforms supporting Intel Rapid Storage Technology. Similarly four 730 Series drives in a RAID-0 array with an Intel chipset based platform can provide performance exceeding 1500MB/s. ...

Performance Unleashed Performance optimized 3rd Generation Intel controller with Intel Data Center DNA The Intel Solid-State Drive 730 Series delivers uncompromised performance by combining factory tuned components with Data Center DNA. Maximize your computing experience with the Intel SSD 730 Series built with a specially qualified 3rd generation Intel controller, 20nm NAND & optimized firmware. Intel has taken storage a step further by factory overclocking these components to push the limits of performance with a 50% increase in controller speed & 20% increase in NAND bus speed. Intel SSD 730 Series are optimized for the most demanding tasks including digital content creation, video capture/editing, extreme gaming & other client usages where storage performance improves the user’s experience & efficiency. Applications will benefit from the 50µs read latency, up to 550MB/s sequential reads & 89, 000 IOPs random reads. 730 Series + Intel Rapid Storage Technology = Amazing Performance Digital Content Creation experts & PC Enthusiasts know the highest storage performance is achieved with RAID-0 configurations as SSDs saturate the SATA interface. Comparing two 730 Series drives in a RAID-0 array to a single alternative SSD, results in the same capacity & nearly double the performance. As shown below, two 730 Series drives in a RAID-0 configuration can provide throughput numbers exceeding 1000MB/s when coupled with Intel platforms supporting Intel Rapid Storage Technology. Similarly four 730 Series drives in a RAID-0 array with an Intel chipset based platform can provide performance exceeding 1500MB/s. ...

Intel 750 Series 1.2TB PCI-E 3.0 SSD The Intel SSD 750 series is Intel's first PCIe Gen 3 x 4 SSD developed for the client enthusiast & workstation markets. The Intel SSD 750 series is architected with the high performance controller interface
- Non-Volatile Memory Express (NVMe)
- delivering outstanding performance, low latency & Quality of Service. NVMe is a standardized interface that enables higher performance & lower latency than previous generations. The Intel SSD 750 series is Intel's highest performing client drive specifically designed for the PC enthusiast & workstation systems with demanding storage workstation requirements. With PCIe Gen 3 x 4 support & NVMe queuing interface, the Intel SSD 750 series delivers excellent sequential read performance of up to 2.4 GB/s & sequential write speeds of up to 1.2 GB/s. The Intel SSD 750 series delivers random read IOPS of up to 440K & random write IOPS of up to 290K for 4 KB operations. Also, by taking advantage of the direct path from the storage to the CPU by means of NVMe, the Intel SSD 750 series exhibits low latency of less than 20 μs for sequential access to the SSD. Specifications: General: Device Type: Solid state drive
- internal Capacity: 1.2 TB NAND Flash Memory Type:20nm multi-level cell (MLC) Interface: PCI Express 3.0 x 4 (NVMe)

Features: Read Unrecoverable Bit Error Rate (UBER) 10e-16, Temperature Monitoring & Logging, Enhanced Power Loss Data Protection, half-height half-length form-factor, S.M.A.R.T.

Width: 1.874 cm

Depth: 16.765 cm

Height: 6.89 cm Weight: 195 g Performance: SSD Endurance: 2.19 PB Internal Data Rate: 2500 MBps (read) / 1200 MBps (write) 4KB Random Read: 460000 IOPS 4KB Random Write: 290000 IOPS Reliability MTBF: 1, 200, 000 hours Non-Recoverable Errors: 1 per 10^16 Expansion & Connectivity Interfaces: 1 x PCI Express 3.0 x 4 (NVMe) Power: Power Consumption: 22 Watt (write ) 10 Watt (read ) 4 Watt (idle ) Software & System Requirements: OS Required: Microsoft Windows 7 / Windows 8 / Windows 8.1 (64 bits) Miscellaneous: Compliant Standards: UL, VCCI, C-Tick, BSMI, WHQL, Ro HS, KCC, WEEE, EN 60950-1 Second Edition, CEM, EN55022:2010, EN55024:2010, EN 61000-4-2:95, EN 61000-4-3:96, EN 61000-4-4:95, EN 61000-4-5:95, EN 61000-4-6:97, EN 61000-4-11:94, ENV 50204:95, ICES-003 issue 4, WHCK Manufacturer Warranty: Service & Support: 5 years warranty Service & Support

Details: Limited warranty
- 5 years Environmental Parameters: Min Operating Temperature: 0 °C Max Operating Temperature: 55 °C Humidity Range Operating: 5
- 95% Shock Tolerance (operating): 50 g Shock Tolerance (non-operating): 50 g Vibration Tolerance (operating): 2.17 g @ 5-700 Hz Vibration Tolerance (non-operating): 3.13 g @ 5-800 Hz














...

Intel 750 Series 400GB 2.5in PCI-E 3.0 SSD Specifications Essentials Capacity 400 GB Lithography Type 20nm Performance Sequential Read (up to) 2200 MB/s Sequential Write (up to) 900 MB/s Random Read (8GB Span) (up to) 430000 IOPS Random Write (8GB Span) (up to) 230000 IOPS Latency
- Read 20 µs Latency
- Write 20 µs Power
- Active 12 Power
- Idle 4 Reliability Vibration
- Operating 2.17 Vibration
- Non-Operating 3.13 Shock (Operating & Non-Operating) 1000 Operating Temperature Range 0°C to 35°C Endurance Rating (Lifetime Writes) 70GB per day Mean Time Between Failures (MTBF) 1.2M hours Uncorrectable Bit Error Rate (UBER) < 1 sector per 10^16 bits read Warranty Period 5 yrs Package Specifications Weight 125g Form Factor 2.5" 15mm Interface PCIe NVMe 3.0 x 4 Advanced Technologies Enhanced Power Loss Data Protection Yes – High Endurance Technology (HET) No Temperature Monitoring & Logging Yes End-to-End Data Protection No Intel Smart Response Technology No Intel Rapid Start Technology No





...

Intel 750 Series 400GB PCI Express 3.0 x 4 SSD The Intel SSD 750 series is Intel's first PCIe Gen 3 x 4 SSD developed for the client enthusiast & workstation markets. The Intel SSD 750 series is architected with the high performance controller interface
- Non-Volatile Memory Express (NVMe)
- delivering outstanding performance, low latency & Quality of Service. NVMe is a standardized interface that enables higher performance & lower latency than previous generations. The Intel SSD 750 series is Intel's highest performing client drive specifically designed for the PC enthusiast & workstation systems with demanding storage workstation requirements. With PCIe Gen 3 x 4 support & NVMe queuing interface, the Intel SSD 750 series delivers excellent sequential read performance of up to 2.4 GB/s & sequential write speeds of up to 1.2 GB/s. The Intel SSD 750 series delivers random read IOPS of up to 440K & random write IOPS of up to 290K for 4 KB operations. Also, by taking advantage of the direct path from the storage to the CPU by means of NVMe, the Intel SSD 750 series exhibits low latency of less than 20 μs for sequential access to the SSD. General: Device Type Solid state drive
- internal Capacity 400 GB NAND Flash Memory Type 20nm multi-level cell (MLC) Interface PCI Express 3.0 x 4 (NVMe) Features Read Unrecoverable Bit Error Rate (UBER) 10e-16, Temperature Monitoring & Logging, Enhanced Power Loss Data Protection, half-height half-length form-factor, S.M.A.R.T. Width 1.874 cm Depth 16.765 cm Height 6.89 cm Weight 195 g Performance SSD Endurance 2.19 PB Internal Data Rate 2200 MBps (read) / 900 MBps (write) 4KB Random Read 430000 IOPS 4KB Random Write 230000 IOPS Reliability MTBF 1, 200, 000 hours Non-Recoverable Errors 1 per 10^16 Expansion & Connectivity Interfaces 1 x PCI Express 3.0 x 4 (NVMe) Power Power Consumption 12 Watt (write ) 9 Watt (read ) 4 Watt (idle ) Software & System Requirements OS Required Microsoft Windows 7 / Windows 8 / Windows 8.1 (64 bits) Miscellaneous Compliant Standards UL, VCCI, C-Tick, BSMI, WHQL, Ro HS, KCC, WEEE, EN 60950-1 Second Edition, CEM, EN55022:2010, EN55024:2010, EN 61000-4-2:95, EN 61000-4-3:96, EN 61000-4-4:95, EN 61000-4-5:95, EN 61000-4-6:97, EN 61000-4-11:94, ENV 50204:95, ICES-003 issue 4, WHCK Manufacturer Warranty Service & Support 5 years warranty Service & Support Details Limited warranty
- 5 years Environmental Parameters Min Operating Temperature 0 °C Max Operating Temperature 55 °C Humidity Range Operating 5
- 95% Shock Tolerance (operating) 50 g Shock Tolerance (non-operating) 50 g Vibration Tolerance (operating) 2.17 g @ 5-700 Hz Vibration Tolerance (non-operating) 3.13 g @ 5-800 Hz




...

Intel 750 Series 800GB 2.5in PCI-E 3.0 SSD Specifications Essentials Capacity 800 GB Lithography Type 20 nm Performance Sequential Read (up to) 2100 MB/s Sequential Write (up to) 800 MB/s Random Read (8GB Span) (up to) 420000 IOPS Random Write (8GB Span) (up to) 210000 IOPS Latency
- Read 20 µs Latency
- Write 20 µs Power
- Active 15 Power
- Idle 4 Reliability Vibration
- Operating 2.17 Vibration
- Non-Operating 3.13 Shock (Operating & Non-Operating) 50 Operating Temperature Range 0°C to 55°C Endurance Rating (Lifetime Writes) 1.2M hours Mean Time Between Failures (MTBF) < 1 sector per 10^16 bits read Warranty Period 5 yrs Package Specifications Weight 195g Form Factor 2.5" 15mm Interface PCIe NVMe 3.0 x 4 Advanced Technologies Enhanced Power Loss Data Protection Yes – High Endurance Technology (HET) No Temperature Monitoring & Logging Yes End-to-End Data Protection No Intel Smart Response Technology No Intel Rapid Start Technology No





...

Intel 750 Series 800 GB PCI Express 3.0 SSD The Intel SSD 750 series is Intel's first PCIe Gen 3 x 4 SSD developed for the client enthusiast & workstation markets. The Intel SSD 750 series is architected with the high performance controller interface
- Non-Volatile Memory Express (NVMe)
- delivering outstanding performance, low latency & Quality of Service. NVMe is a standardized interface that enables higher performance & lower latency than previous generations. The Intel SSD 750 series is Intel's highest performing client drive specifically designed for the PC enthusiast & workstation systems with demanding storage workstation requirements. With PCIe Gen 3 x 4 support & NVMe queuing interface, the Intel SSD 750 series delivers excellent sequential read performance of up to 2.4 GB/s & sequential write speeds of up to 1.2 GB/s. The Intel SSD 750 series delivers random read IOPS of up to 440K & random write IOPS of up to 290K for 4 KB operations. Also, by taking advantage of the direct path from the storage to the CPU by means of NVMe, the Intel SSD 750 series exhibits low latency of less than 20 μs for sequential access to the SSD. PCIe Gen 3 x 4 with NVMe interface Consistently Higher IOPS & throughput Sustained low latency Enhanced power-loss data protection Specifications Device Type Solid state drive
- internal Capacity 800 GB NAND Flash Memory Type 20nm multi-level cell (MLC) Interface PCI Express 3.0 x 4 (NVMe) Features Read Unrecoverable Bit Error Rate (UBER) 10e-16, Temperature Monitoring & Logging, Enhanced Power Loss Data Protection, half-height half-length form-factor, S.M.A.R.T. Width 1.874 cm Depth 16.765 cm Height 6.89 cm Weight 195 g Performance SSD Endurance 2.19 PB Internal Data Rate 2100 MBps (read) / 800 MBps (write) 4KB Random Read 420000 IOPS 4KB Random Write 210000 IOPS Reliability MTBF 1, 200, 000 hours Non-Recoverable Errors 1 per 10^16 Expansion & Connectivity Interfaces 1 x PCI Express 3.0 x 4 (NVMe) Power Power Consumption 15 Watt (write ) 9 Watt (read ) 4 Watt (idle ) Software & System Requirements OS Required Microsoft Windows 7 / Windows 8 / Windows 8.1 (64 bits) Miscellaneous Compliant Standards UL, VCCI, C-Tick, BSMI, WHQL, Ro HS, KCC, WEEE, EN 60950-1 Second Edition, CEM, EN55022:2010, EN55024:2010, EN 61000-4-2:95, EN 61000-4-3:96, EN 61000-4-4:95, EN 61000-4-5:95, EN 61000-4-6:97, EN 61000-4-11:94, ENV 50204:95, ICES-003 issue 4, WHCK Manufacturer Warranty Service & Support 5 years warranty Service & Support Details Limited warranty
- 5 years Environmental Parameters Min Operating Temperature 0 °C Max Operating Temperature 55 °C Humidity Range Operating 5
- 95% Shock Tolerance (operating) 50 g Shock Tolerance (non-operating) 50 g Vibration Tolerance (operating) 2.17 g @ 5-700 Hz Vibration Tolerance (non-operating) 3.13 g @ 5-800 Hz




...

High Performance Accelerate your PC with PCIe* bandwidth, 64-layer Intel 3D NAND Technology, twice the capacity, & twice the performance of its previous generation – the Intel SSD 600p Series.1 Low Power Consumption Compared with its previous generation, the Intel SSD 760p Series reduces its active power up to 50%.2 Intel Quality & Reliability Thanks to Intel’s industry leading quality & reliability, the Intel SSD 760p Series supports AES 256-bit self-encryption & offers a 5-year limited warranty. Made for Easy Installation A small M.2 (80mm) form factor offers a wide range of capacities & simply plugs into M.2
- M key slots on major motherboards. Specifications Capacity 1.02 TB Status Launched Lithography Type 3D2 TLC Weight <10 grams Form Factor M.2 22 x 80mm Interface PCIe NVMe 3.1 x 4 Performance Sequential Read (up to)3230 MB/s Sequential Write (up to) 1625 MB/s Random Read (8GB Span) (up to) 340000 IOPS Random Write (8GB Span) (up to) 275000 IOPS Power – Active 50 m W Power – Idle 25 m W Reliability Vibration – Operating 2.17 GRMS Vibration
- Non-Operating 3.13 GRMS Shock (Operating & Non-Operating) 1000 G Operating Temperature Range 0°C to 70°C Endurance Rating (Lifetime Writes) 576 TBW Mean Time Between Failures (MTBF) 1.6 million hours Uncorrectable Bit Error Rate (UBER) <1 sector per 10^15 bits read Warranty Period 5 yrs Advanced Technologies Enhanced Power Loss Data Protection No Hardware Encryption AES 256 bit High Endurance Technology (HET) No Temperature Monitoring & Logging No End-to-End Data Protection Yes Intel Smart Response Technology Yes Intel Rapid Start Technology Yes Intel Remote Secure Erase No

...