. rpd-row { overflow: hidden; padding: 30px 0; border-bottom: 1px solid eee; }. rpd-row h 3 { font-
Size:22px; }. rpd-row
...

HYPERX FURY 32GB (2X 16GB) 3200MHZ DDR4 RAM Hyper X FURY DDR4 powers into your home for a performance boost for all your gaming, video editing, & rendering needs. This cost-effective upgrade is available in 2400 M Hz–3733 M Hz speeds, CL15–19 latencies, single module capacities of 4GB–32GB, & kit capacities of 16GB–128GB. Fully Intel XMP-ready & AMD Ryzen. Hyper X FURY DDR4 stays cool with its stylish, low-profile heat spreader. 100% tested at speed & backed by a lifetime warranty, it’s an easy, worry-free upgrade for your Intel or AMD-based system. Unleash your style, unleash your fury. AUTOMATIC OVERLOCKING Seamless integration with your AMD-based system. Hyper X FURY DDR4 detects your system’s components & automatically overclocks itself to the high published frequency (up to 3466 MHz) for a Plug N Play performance boost. This allows both gamers & those who need to get some serious work done crank up the settings on your favourite games while providing better video editing & rendering performance. COST & ENERGY EFFICIENT Get yourself a big boost without breaking the bank! Hyper X FURY DDR4 is the perfect choice for a system builder, or someone looking for an upgrade to jump start their sluggish system. Not only that, DDR4’s standard low 1.2 voltage means it runs cooler & is more reliable than previous generations so you get more for your money, for longer. INTELLEGENT DESIGN Functionality combine with style & you can stand out from the crowd & show off with FURY’s asymmetrical signature heat spreader, which in turn helps with overheating. Inside & out, everything that goes into this unique & contemporary design inspires greater performance for an overall superior gaming & computer experience. TECHNICAL INFORMATION 32 GB Memory Size 2 Module Pack DDR4 Memory Type DIMM Form Factor Black Module Colour 3600 M Hz Memory Speed ...

HYPERX FURY 32GB (2X 16GB) 3200MHZ DDR4 RAM Hyper X FURY DDR4 powers into your home for a performance boost for all your gaming, video editing, & rendering needs. This cost-effective upgrade is available in 2400 M Hz–3733 M Hz speeds, CL15–19 latencies, single module capacities of 4GB–32GB, & kit capacities of 16GB–128GB. Fully Intel XMP-ready & AMD Ryzen. Hyper X FURY DDR4 stays cool with its stylish, low-profile heat spreader. 100% tested at speed & backed by a lifetime warranty, it’s an easy, worry-free upgrade for your Intel or AMD-based system. Unleash your style, unleash your fury. AUTOMATIC OVERLOCKING Seamless integration with your AMD-based system. Hyper X FURY DDR4 detects your system’s components & automatically overclocks itself to the high published frequency (up to 3466 MHz) for a Plug N Play performance boost. This allows both gamers & those who need to get some serious work done crank up the settings on your favourite games while providing better video editing & rendering performance. COST & ENERGY EFFICIENT Get yourself a big boost without breaking the bank! Hyper X FURY DDR4 is the perfect choice for a system builder, or someone looking for an upgrade to jump start their sluggish system. Not only that, DDR4’s standard low 1.2 voltage means it runs cooler & is more reliable than previous generations so you get more for your money, for longer. INTELLEGENT DESIGN Functionality combine with style & you can stand out from the crowd & show off with FURY’s asymmetrical signature heat spreader, which in turn helps with overheating. Inside & out, everything that goes into this unique & contemporary design inspires greater performance for an overall superior gaming & computer experience. TECHNICAL INFORMATION 32 GB Memory Size 2 Module Pack DDR4 Memory Type DIMM Form Factor Black Module Colour 2666 M Hz Memory Speed ...

HYPERX FURY 32GB (2X 16GB) 3200MHZ DDR4 RAM Hyper X FURY DDR4 powers into your home for a performance boost for all your gaming, video editing, & rendering needs. This cost-effective upgrade is available in 2400 M Hz–3733 M Hz speeds, CL15–19 latencies, single module capacities of 4GB–32GB, & kit capacities of 16GB–128GB. Fully Intel XMP-ready & AMD Ryzen. Hyper X FURY DDR4 stays cool with its stylish, low-profile heat spreader. 100% tested at speed & backed by a lifetime warranty, it’s an easy, worry-free upgrade for your Intel or AMD-based system. Unleash your style, unleash your fury. AUTOMATIC OVERLOCKING Seamless integration with your AMD-based system. Hyper X FURY DDR4 detects your system’s components & automatically overclocks itself to the high published frequency (up to 3466 MHz) for a Plug N Play performance boost. This allows both gamers & those who need to get some serious work done crank up the settings on your favourite games while providing better video editing & rendering performance. COST & ENERGY EFFICIENT Get yourself a big boost without breaking the bank! Hyper X FURY DDR4 is the perfect choice for a system builder, or someone looking for an upgrade to jump start their sluggish system. Not only that, DDR4’s standard low 1.2 voltage means it runs cooler & is more reliable than previous generations so you get more for your money, for longer. INTELLEGENT DESIGN Functionality combine with style & you can stand out from the crowd & show off with FURY’s asymmetrical signature heat spreader, which in turn helps with overheating. Inside & out, everything that goes into this unique & contemporary design inspires greater performance for an overall superior gaming & computer experience. TECHNICAL INFORMATION 32 GB Memory Size 2 Module Pack DDR4 Memory Type DIMM Form Factor Black Module Colour 3200 M Hz Memory Speed ...

Hyper X HX421C14FB/4 is a 512M x 64-bit (4GB) DDR4-2133 CL14 SDRAM (Synchronous DRAM) 1 Rx 8, memory module, based oneight 512M x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2133 at a low latency timing of 14-14-14 at 1.2V. ...

Get in the game with Hyper X FURY. Even newbies get up to speed fast, since FURY automatically recognises its host platform & automatically overclocks to up to 1866 M Hz, providing plenty of power for your next death match. FURY's asymmetric heatspreader design lets you stand out from the crowd. It's available in black, blue, red & -- for the first time in the Hyper X line -- white, with a black PCB. So your rig can reflect your style & you can show it off with pride. It's 100-percent tested & LAN-ready plus it's backed by free technical support. Hyper X Pn P memory will run in most DDR3 systems up to the speed allowed by the manufacturer's system BIOS. Pn P cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Hyper X FURY is available in frequency speeds from 1333 M Hz to 1866 M Hz. Reach faster speeds & higher capacities by just installing the memory, no adjustments in BIOS needed. No matter if you are an Intel or AMD gamer, the Hyper X FURY is ideal for you. To make sure it works, Hyper X FURY has been tested with popular brands of motherboards. Does your system have enough memory to get you into the game? Kits are available to max out your system's memory with up to 16GB of high-performance goodness. ...

Hyper X FURY Low Voltage 16GB Kit DDR3L 1600 M Hz Memory (2x 8GB) Hyper X HX316LC10FB/4 is a 512M x 64-bit (4GB) DDR3L-1600 CL10 SDRAM (Synchronous DRAM) 1 Rx 8, low voltage, memory module, based on eight 512M x 8-bit DDR3 FBGA components. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. This module has been tested to run at DDR3L-1600 at a low latency timing of 10-10-10 at 1.35V. Additional timing parameters are shown in the Pn P Timing Parameters section below. The JEDEC standard electrical & mechanical specifications areas follows: Pn P JEDEC TIMING PARAMETERS: JEDEC/ Pn P: DDR3L-1600 CL10-10-10 @1.35V/1.5V DDR3L-1333 CL9-9-9 @1.35V/1.5V DDR3L-1066 CL7-7-7 @1.35V/1.5V XMP Profile 1: DDR3L-1600 CL10-10-10 @1.35V FEATURES JEDEC standard 1.35V & 1.5V Power Supply VDDQ = 1.35V & 1.5V 800 M Hz f CK for 1600 Mb/sec/pin independent internal bank Programmable CAS Latency: 11, 10, 9, 8, 7, 6 Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE ≤ 95°C Asynchronous Reset Height 1.291” (32.80mm) w/heatsink, single sided component SPECIFICATIONS CL (IDD) 10 cycles Row Cycle Time (t R Cmin) 28.125ns (min.) Refresh to Active/ Refresh Command Time (t RFCmin) 260ns (min.) Row Active Time (t RASmin) 37.5ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to +85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used.


...

Hyper X FURY Low Voltage 4GB DDR3L 1866 M Hz Memory Hyper X HX316LC10FB/4 is a 512M x 64-bit (4GB) DDR3L-1600 CL10 SDRAM (Synchronous DRAM) 1 Rx 8, low voltage, memory module, based on eight 512M x 8-bit DDR3 FBGA components. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. This module has been tested to run at DDR3L-1600 at a low latency timing of 10-10-10 at 1.35V. Additional timing parameters are shown in the Pn P Timing Parameters section below. The JEDEC standard electrical & mechanical specifications areas follows: Pn P JEDEC TIMING PARAMETERS: JEDEC/ Pn P: DDR3L-1600 CL10-10-10 @1.35V/1.5V DDR3L-1333 CL9-9-9 @1.35V/1.5V DDR3L-1066 CL7-7-7 @1.35V/1.5V XMP Profile 1: DDR3L-1600 CL10-10-10 @1.35V FEATURES JEDEC standard 1.35V & 1.5V Power Supply VDDQ = 1.35V & 1.5V 800 M Hz f CK for 1600 Mb/sec/pin independent internal bank Programmable CAS Latency: 11, 10, 9, 8, 7, 6 Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE ≤ 95°C Asynchronous Reset Height 1.291” (32.80mm) w/heatsink, single sided component 726074 SPECIFICATIONS CL (IDD) 10 cycles Row Cycle Time (t R Cmin) 44.75ns (min.) Refresh to Active/ Refresh Command Time (t RFCmin) 260ns (min.) Row Active Time (t RASmin) 32.125ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to +85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used.


...

Hyper X FURY Low Voltage 8GB DDR3L 1600 M Hz Memory Hyper X HX316LC10FB/4 is a 512M x 64-bit (4GB) DDR3L-1600 CL10 SDRAM (Synchronous DRAM) 1 Rx 8, low voltage, memory module, based on eight 512M x 8-bit DDR3 FBGA components. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. This module has been tested to run at DDR3L-1600 at a low latency timing of 10-10-10 at 1.35V. Additional timing parameters are shown in the Pn P Timing Parameters section below. The JEDEC standard electrical & mechanical specifications areas follows: Pn P JEDEC TIMING PARAMETERS: JEDEC/ Pn P: DDR3L-1600 CL10-10-10 @1.35V/1.5V DDR3L-1333 CL9-9-9 @1.35V/1.5V DDR3L-1066 CL7-7-7 @1.35V/1.5V XMP Profile 1: DDR3L-1600 CL10-10-10 @1.35V FEATURES JEDEC standard 1.35V & 1.5V Power Supply VDDQ = 1.35V & 1.5V 800 M Hz f CK for 1600 Mb/sec/pin independent internal bank Programmable CAS Latency: 11, 10, 9, 8, 7, 6 Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE ≤ 95°C Asynchronous Reset Height 1.291” (32.80mm) w/heatsink, single sided component SPECIFICATIONS CL (IDD) 10 cycles Row Cycle Time (t R Cmin) 28.125ns (min.) Refresh to Active/ Refresh Command Time (t RFCmin) 260ns (min.) Row Active Time (t RASmin) 37.5ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to +85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used.


...

Hyper X FURY Low Voltage 8GB DDR3L 1866 M Hz Memory Hyper X HX316LC10FB/4 is a 512M x 64-bit (4GB) DDR3L-1600 CL10 SDRAM (Synchronous DRAM) 1 Rx 8, low voltage, memory module, based on eight 512M x 8-bit DDR3 FBGA components. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. This module has been tested to run at DDR3L-1600 at a low latency timing of 10-10-10 at 1.35V. Additional timing parameters are shown in the Pn P Timing Parameters section below. The JEDEC standard electrical & mechanical specifications areas follows: Pn P JEDEC TIMING PARAMETERS: JEDEC/ Pn P: DDR3L-1600 CL10-10-10 @1.35V/1.5V DDR3L-1333 CL9-9-9 @1.35V/1.5V DDR3L-1066 CL7-7-7 @1.35V/1.5V XMP Profile 1: DDR3L-1600 CL10-10-10 @1.35V FEATURES JEDEC standard 1.35V & 1.5V Power Supply VDDQ = 1.35V & 1.5V 800 M Hz f CK for 1600 Mb/sec/pin independent internal bank Programmable CAS Latency: 11, 10, 9, 8, 7, 6 Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE ≤ 95°C Asynchronous Reset Height 1.291” (32.80mm) w/heatsink, single sided component 726074 SPECIFICATIONS CL (IDD) 10 cycles Row Cycle Time (t R Cmin) 44.75ns (min.) Refresh to Active/ Refresh Command Time (t RFCmin) 260ns (min.) Row Active Time (t RASmin) 32.125ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to +85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used.


...