HP Storage Works LTO Ultrium Tape Drives represent five-generations of LTO tape drive technology capable of storing up to 3 TB per cartridge, with HP Tape Assure for manageability, hardware data encryption & unprecedented performance. With HP Tape Assure customers can be confident that their data is safe by monitoring drive & media utilization, operational performance & life/health information for drive & media. Data hardware encryption using AES 256-bit provides easy-to-enable security to protect the most sensitive data & prevent unauthorized access of tape cartridges. By using encryption, data is fully capable of being compressed therefore maximizing capacity; encrypted backups are completed without a loss in performance. Capable of data transfer rates up to 280 MB/sec, HPs exclusive data rate matching further optimizes performance by matching host system speed to keep drives streaming, thus enabling the fastest tape performance. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

HP Storage Works LTO Ultrium Tape Drives represent five-generations of LTO tape drive technology capable of storing up to 3 TB per cartridge, with HP Tape Assure for manageability, hardware data encryption & unprecedented performance. With HP Tape Assure customers can be confident that their data is safe by monitoring drive & media utilization, operational performance & life/health information for drive & media. Data hardware encryption using AES 256-bit provides easy-to-enable security to protect the most sensitive data & prevent unauthorized access of tape cartridges. By using encryption, data is fully capable of being compressed therefore maximizing capacity; encrypted backups are completed without a loss in performance. Capable of data transfer rates up to 280 MB/sec, HPs exclusive data rate matching further optimizes performance by matching host system speed to keep drives streaming, thus enabling the fastest tape performance. ...

The M6412-A FC drive enclosure has dual redundant hot plug FC I/O/ Environmental Monitoring Unit (EMU) modules that allow the controllers to distribute I/ Os between the two modules & provides redundant paths should either FC I/O module become unavailable & the EMU functionality means that you can monitor & report the condition of the power supplies & fans. The enclosure also has dual redundant hot plug power supplies & dual hot plug blowers. The enclosure also has a hot plug Environmental Monitoring Unit (EMU). The M6412-A drive enclosure provides point to point connectivity within the enclosure. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The HP Storage Works 2000i G2 Modular Smart Array selection of SAN devices features the very latest in efficient consolidation, functionality & technology at very affordable prices. The ideal customers needing to consolidate their storage include smaller companies with tight budgets & limited IT expertise, or larger companies that have perhaps hundreds of smaller departments & remote locations. The MSA2000i G2 features a 1 Gb Ethernet (1 Gb E) i SCSI connected array. It allows customers to grow their storage as demands increase up to 29.7TB SAS or 60TB SATA, supporting up to 32 hosts for i SCSI attach. ...

The HP Storage Works Modular Smart Array 50 Enclosure MSA50 is a 1U Serial Attach SCSI (SAS) disk drive storage enclosure supporting Small Form Factor (SFF) SAS or Serial ATA (SATA) drives. This enclosure delivers industry-leading data performance, availability, storage density, & upgradeability to meet customers demanding & growing storage needs. The SFF drive carrier is designed to support the Universal form factor hard drive in either SAS or SATA. This new form factor provides optimized performance per U of space while delivering unparalleled power consumption. The MSA50 enclosure supports direct attach storage to HP Pro Liant Servers. The MSA50 supports the cascading of shelves in a 1+1 configuration to allow a maximum of 20 SFF drives in a 2U configuration attached to a single controller port. This single controller port incorporates four lanes for a total max throughput of 12 Gb/s for SAS. Box content Rack-mountable 10 SFF drive enclosure with single I/O module, redundant hot plug power supplies & hot plug fans Maximum capacity 720 GB per enclosure Package

Dimensions (W x D x H) 59.22 x 83.16 x 30.24 cm Weight 9.07kg Package weight 9.07kg Chassis type 1U rack height Warranty standard statement Three-year limited parts only warranty, including hardware diagnostic support, pre-failure warranty (coverage of hard drives, memory & processors).

...

P2000 MSA Array System Dual I/O enclosure is designed for large form factor drives. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The P2000 G3 10 Gb E i SCSI brings high-performance host connection with technology generally found only in higher priced arrays. The bandwidth provides in conjunction with server consolidation is highly advantageous in shared storage configurations. Array connection to 10 Gb E switches that are in turn connected to 1 Gb E NICs is commonplace. Directly attached server support requires the server units to have 10 Gb E NICs. The most recent addition is the P2000 G3 i SCSI controller featuring four 1 Gb i SCSI Ethernet ports, double the number of the G2 model. This allows an array that keeps the price of the components, particularly the interconnects, low while markedly increasing the performance capabilities. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The P2000 G3 SAS is the follow-on product to the MSA2000sa G2, adding the 6 Gb SAS technology to the four host ports per controller. It also features the same scalability as the P2000 G3 FC model, offering 6 Gb SAS back-end transmission speed to drives & JBODs. The P2000 G3 SAS array is designed for directly attaching up to four dual-path or eight single path servers. SAS array support for blade systems will continue to come from the MSA2000sa G2. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

How can the flexibility of the HP Storage Works P2000 G3 MSA Array Systems help remedy growing storage needs & small budgets? By offering high-performance 6 Gb SAS connected arrays designed for efficient storage consolidation at affordable prices. The arrays allow departments & small to medium businesses to grow capacity as needed up to 149 drives. Configure with a dual controllers for higher availability & performance for the most demanding entry-level situations. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The P2000 G3 10 Gb E i SCSI brings high-performance host connection with technology generally found only in higher priced arrays. The bandwidth provides in conjunction with server consolidation is highly advantageous in shared storage configurations. Array connection to 10 Gb E switches that are in turn connected to 1 Gb E NICs is commonplace. Directly attached server support requires the server units to have 10 Gb E NICs. The most recent addition is the P2000 G3 i SCSI controller featuring four 1 Gb i SCSI Ethernet ports, double the number of the G2 model. This allows an array that keeps the price of the components, particularly the interconnects, low while markedly increasing the performance capabilities. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...