The 8 Gbit/sec Fiber Channel 8/8 SAN Switch provides an affordable single-switch solution for a small SAN installation & connects to storage & servers only. The 8/8 SAN Switch comes with a Full Fabric license & may be connected to multiple switches. Both 8 port switches provide growth options with Ports on Dem&, the ability to non-disruptively to a max of 24 enabled ports. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The 3U Rack-Mount Kit is 5 of 6 Ro HS compliant & holds up to two full-height SCSI only internal tape drives, four SCSI only half-height tape drives, or a combination of one full-height & two half-height tape drives. This enclosure supports a wide range of tape technologies, including DAT, DLT VS, SDLT, & Ultrium, with a maximum capacity of 1.6 TB using two Ultrium 960 drives or four Ultrium 448 drives (assuming 2:1data compression). The enclosure can support up to four separate SCSI buses, allowing tape drives to be configured for best performance (Ultra 160 or greater drives require cable option kit DWO63B (sold separately) when configuring 4 half-height drives) ...

The HP Storage Works 1/8 G2 Tape Autoloader provides a cost-effective, easy-to-install, unattended backup that is ideal for an entry-level or remote office automated backup solution. The HP 1/8 G2 autoloader combines incredible storage density & tape library features into a compact 1U form factor. Capable of up to 24TB of compressed capacity in only a 1U form factor, the autoloader is well equipped to offer room for uncertain data growth. Web-based remote management offers the capability to quickly & easily access, configure, monitor, & troubleshoot the autoloader that will reduce dependencies on local IT staff while allowing multiple sites to be supported centrally. Protect confidential business information with native encryption, ensuring that if a tape is lost or stolen your data is protected from unauthorized access. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The HP Storage Works 1/8 G2 Tape Autoloader provides a cost-effective, easy-to-install, unattended backup that is ideal for an entry-level or remote office automated backup solution. The HP 1/8 G2 autoloader combines incredible storage density & tape library features into a compact 1U form factor. Capable of up to 24TB of compressed capacity in only a 1U form factor, the autoloader is well equipped to offer room for uncertain data growth. Web-based remote management offers the capability to quickly & easily access, configure, monitor, & troubleshoot the autoloader that will reduce dependencies on local IT staff while allowing multiple sites to be supported centrally. Protect confidential business information with native encryption, ensuring that if a tape is lost or stolen your data is protected from unauthorized access. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Designed for basic data protection, the HP Storage Works 1/8 G2 Tape Autoloader provides cost-effective, easy-to-install unattended backup. In a rack or on a desktop, it provides up to 6.4 TB of compressed storage capacity in a compact 1U form factor. The 1/8 G2 can hold up to eight data cartridges to accommodate a weeks worth of backup. In order to easily manage your media, standard features include a bar code reader & two removable 4-slot magazines. Manage the autoloader from across the room or across the globe with the web-based remote management interface. Technical Details Product Description: HP Storage Works 1/8 G2 Tape Autoloader Ultrium 920
- tape autoloader
- LTO Ultrium
- SCSI Device Type: Tape autoloader
- LTO Ultrium Recording Standard: LTO Ultrium 3 Enclosure Type: External
- 1U Interface Type: SCSI Total Storage Capacity: 3.2 TB (native) / 6.4 TB (compressed) Removable Media Capacity: 8 Average Media Exchange Time: 34 sec Supported Tape Drives: LTO Ultrium 3 Key

Features: Barcode reader

Dimensions (Wx Dx H): 48.2 cm x 80.9 cm x 4.4 cm Weight: 11.5kg Storage Removable: LTO Ultrium Storage Removable Capacity: 400 GB (native) / 800 GB (compressed) Media Type: LTO Ultrium Data Transfer Rate (native): 60 MBps (216 GBph ) Data Transfer Rate (compressed): 120 MBps (432 GBph ) Power: AC 120/230 V (50/60 Hz ) Manufacturer Warranty: 1 year warranty








...

The HP Storage Works 2000sa G2 Modular Smart Array is a 3 Gb SAS direct attach, external shared storage solution that helps customers easily transition from direct attached to centralized storage. It allows departmental & small to medium businesses customers to grow capacity as demands increase up to 29.7 TB SAS or 60 TB SATA, & supporting up to 64 hosts. With up to 511 LUNs & LUN sizes up to 16 TB, the MSA2000sa G2 gives maximum configuration flexibility. The MSA2000sa G2 allows mixing of enterprise-class, dual-ported SAS drives & archival-class SATA drives, & supports both Large Form Factor & Small Form Factor drives. The optional HP Storage Works 2000 Modular Smart Array Snapshot Software offers increased data protection. The MSA2000sa G2 can be configured with a single controller for a low initial price with future expansion, or with dual controller for situations that require higher availability & performance for the most demanding entry-level situations. ...

The HP Storage Works 2000i G2 modular smart array selection of SAN devices features the very latest in efficient consolidation, functionality & technology at very affordable prices. The ideal customers needing to consolidate their storage include smaller companies with tight budgets & limited IT expertise, or larger companies that have perhaps hundreds of smaller departments & remote locations. The MSA2000i G2 allows customers to grow their storage as demands increase up to 29.7TB SAS or 60TB SATA, supporting up to 32 hosts for i SCSI attach. Planning for future growth is easy by starting with the basic modular pieces & adding capacity as needs arise. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The HP Storage Works 3 Gb SAS BL Switch for HP Blade System C-Class enclosures is an integral part of HP direct connect storage by enabling a straight forward external shared SAS solution. The 3 Gb SAS Switch is a single wide interconnect module that enables each server blade with a Smart Array P700m controller card to communicate with the HP Storage Works MSA2000sa. ...

HP Storage Works 4 Gb PCI-e FC HBAs provide customers the ability to use the higher performance PCI-Express bus to connect to their HP Pro Liant servers with HP Storage Works arrays. The HP Storage Works PCIe 4 Gb Host Bus Adapters (HBAs) support customers using HP Pro Liant servers with PCIe I/O slots running a broad range of operating systems. These Fiber Channel HBAs are second generation products that support this higher speed I/O bus architecture & provide customers the ability to use it to connect to their HP Storage Works arrays. ...

HP simplifies enterprise-class SANs for small & medium customers by combining state-of-the-art 8 Gb Fiber Channel performance from your server to your storage with an end-to-end SAN management system. Your future is protected today with an infrastructure capable of supporting emerging technologies. The HP Storage Works 8 Gb Simple SAN Connection portfolio makes installing your first SAN (or your hundredth) easy by automating every aspect of setup & configuration. An entire SAN may be deployed in minutes
- including switch, HBA & storage provisioning. SAN novices & seasoned experts alike will appreciate the simplicity & power of the included Simple SAN Connection Manager software. It works seamlessly with both HP Storage Works Enterprise Virtual Arrays (EVA) & HP Storage Works Modular Storage Array (MSA) storage systems, HP 8/20q Fiber Channel Switch to handle common cross-platform management & maintenance tasks quickly.
...