United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
Samsung HD204UI Spinpoint F4 2TB Hard Drive SATA 5400RPM 32MB Cache -
OEM
FOR USE WITH NAS DRIVES, WE RECOMMEND INSTALLING THIS FIRMWARE UPDATE BEFORE USING: http://www.samsung.com/global/business/hdd/faqView.do?b2b_bbs_msg_id=386 Samsung HD204UI Spinpoint F4 2TB Hard Drive SATAII 32MB Cache - OEM While other 2TB drives split their collection of bytes over four 500GB platters, Samsungs Spinpoint EcoGreen HD204UI F4 features three 667GB disks. This means the new platters boast the worlds highest areal density at the moment. The 3.5-inch F4 is intended to replace Samsungs four-platter F3 drive, and has otherwise similar specs. The drive is bolstered by a 32MB buffer, and the platters spin at 5400rpm, rather than the 7200rpm rotational speed of some other 2TB desktop drives The new three-platter drive also cuts down on power consumption. The F4 eats 23 per
cent less electricity in standby mode than its predecessor. The drive will remain quiet while its ticking away, taking advantage of the companys SilentSeek and NoiseGuard technologies. The new Spinpoint HD204UI F4EG also supports Native Command Queuing Key Features 667GB Formatted Capacity Per Disk Serial ATA 3.0Gbps Interface Support Improved recording stability over temperature with PMR Advanced dynamic FOD control for best data integrity Intelligent compensation of external disturbance SATA Native Command Queuing Feature Device Initiated SATA Power Management Shock & Rotational vibration sensor Environment friendly product with RoHS compliance Improved performance with dual-ARM based firmware ATA S.M.A.R.T. Compliant ATA Automatic Acoustic Management Feature ATA 48-bit Address
Feature ATA Device Configuration Overlay Feature NoiseGuard SilentSeek 3 Year Warranty SPECIFICATION Drive Configurations Capacity = 2TB Interface = Serial ATA 3.0Gbps Buffer Size = 32 MB Byte per Sector = 4K Sector with Emulation Performance Specifications Average Seek time = 8.9 ms Data Transfer Rate / Media to/from Buffer = 250MB/sec Data Transfer Rate / Buffer to/from Host = 300MB/sec Average Latency = 5.52 ms Drive Ready Time = 13 sec Reliability Specifications Non-recoverable Read Error = 1 sector in 1015bits Acoustics Idle = 2.5/2.6 Bel Performance Seek = 2.8/2.9 Bel Environmental Specifications Temperature / Operating = 0 ~ 60 °C Temperature / Non-operating = -40 ~ 70 °C Humidity(non-condensing) / Operating = 5 ~ 95 % Humidity(non-condensing) / Non-operating = 5 ~ 95 %
Liner Shock(1/2 sine pulse) / Operating = 70 G Liner Shock(1/2 sine pulse) / Non-operating = 300 G Altitude(relative to sea level) / Operating = -1, 000 to 10, 000 ft Altitude(relative to sea level) / Non-operating = -1, 000 to 40, 000 ft Power Requirements Voltage = +5V±5%, +12V±10% Spin-up Current = 2.0A Seek = 5.7W Read/Write = 6.3W Idle = 5.1W Standby = 1W Sleep = 1W Physical Dimension Height = 26.1 mm Width =101.6 mm Length = 147.0 mm Weight = 650g
cent less electricity in standby mode than its predecessor. The drive will remain quiet while its ticking away, taking advantage of the companys SilentSeek and NoiseGuard technologies. The new Spinpoint HD204UI F4EG also supports Native Command Queuing Key Features 667GB Formatted Capacity Per Disk Serial ATA 3.0Gbps Interface Support Improved recording stability over temperature with PMR Advanced dynamic FOD control for best data integrity Intelligent compensation of external disturbance SATA Native Command Queuing Feature Device Initiated SATA Power Management Shock & Rotational vibration sensor Environment friendly product with RoHS compliance Improved performance with dual-ARM based firmware ATA S.M.A.R.T. Compliant ATA Automatic Acoustic Management Feature ATA 48-bit Address
Feature ATA Device Configuration Overlay Feature NoiseGuard SilentSeek 3 Year Warranty SPECIFICATION Drive Configurations Capacity = 2TB Interface = Serial ATA 3.0Gbps Buffer Size = 32 MB Byte per Sector = 4K Sector with Emulation Performance Specifications Average Seek time = 8.9 ms Data Transfer Rate / Media to/from Buffer = 250MB/sec Data Transfer Rate / Buffer to/from Host = 300MB/sec Average Latency = 5.52 ms Drive Ready Time = 13 sec Reliability Specifications Non-recoverable Read Error = 1 sector in 1015bits Acoustics Idle = 2.5/2.6 Bel Performance Seek = 2.8/2.9 Bel Environmental Specifications Temperature / Operating = 0 ~ 60 °C Temperature / Non-operating = -40 ~ 70 °C Humidity(non-condensing) / Operating = 5 ~ 95 % Humidity(non-condensing) / Non-operating = 5 ~ 95 %
Liner Shock(1/2 sine pulse) / Operating = 70 G Liner Shock(1/2 sine pulse) / Non-operating = 300 G Altitude(relative to sea level) / Operating = -1, 000 to 10, 000 ft Altitude(relative to sea level) / Non-operating = -1, 000 to 40, 000 ft Power Requirements Voltage = +5V±5%, +12V±10% Spin-up Current = 2.0A Seek = 5.7W Read/Write = 6.3W Idle = 5.1W Standby = 1W Sleep = 1W Physical Dimension Height = 26.1 mm Width =101.6 mm Length = 147.0 mm Weight = 650g
Product Description
Reviews/Comments
Add New
Intelligent Comparison
Available
Samsung HD103SJ Spinpoint F3 1TB Hard Drive SATAII 7200rpm 32MB Cache - OEM Ebuyer
£70.00
Archived Product
Samsung 250GB Spinpoint M8 Hard Drive - 2.5" SATA-II - 5400RPM 8MB Cache Ebuyer
£47.00
Available
Samsung SpinPoint M7E HM641JI 640GB 2.5" Hard Drive SATA 5400rpm 8MB Cache - OEM Ebuyer
£65.00
Available
Samsung 320GB SpinPoint F4 Hard Drive - 3.5" SATA-II -7200RPM 16MB Cache Ebuyer
£65.00
Available
Samsung 160GB SpinPoint M8 2.5" Hard Drive - 5400RPM 8MB Cache - HN-M160MBB Ebuyer
£40.00
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark