The Torrent Nano is built to air cool your small build as efficiently as possible. Main standouts include an unobstructed base intake, an open front grille & one of our 180 x 38 mm Dynamic PWM fans (Prisma for RGB version) custom-made to achieve maximum air cooling while maintaining controlled noise levels. Enabling highly efficient cooling with or without a water-loop, the Torrent Nano is a perfect fit for air cooling aficionados looking for a small case. Features Fan & LED lights on TG versions fully controllable through motherboards supporting addressable RGB (5V) RGB TG version

Includes:: a 180 mm Prisma ARGB PWM fan Seamless tempered glass panels with bolt-free top-latching mechanisms for easy handling Front fan brackets allow for unblocked airflow to the larger fan while catering to standard radiator sizes Removable top bezel & routing clips with velcro ties make for easy installation & cable management A sturdy, vibration-damped drive tray supporting a single HDD or dual SSDs with two optional mounting positions A dedicated SSD bracket with room for 2x 2.5" drives included Three bridgeless expansion slots The GPU is situated just above the bottom air intake, allowing it to breathe GPU support bracket that helps your GPU stay level Dust filters for front & bottom easily accessible by removing the front Integrated support for a water-cooling reservoir on the motherboard tray

Includes:: a PWM fan (180 mm) for balancing performance, cooling & noise



...

Meet the Torrent Nano White, crafted to air cool your small build as efficiently as possible. Boasting an unobstructed base intake, open-air front panel, 180mm Dynamic PWM fan which has been custom designed to maintain maximum cooling efficiency with low noise output. Capable of housing a range of additional fans or even up to a 280mm radiator if liquid cooling is more your thing. If your chasing performance & fancy saving some desk real-estate the Torrent Nano from Fractal Designs will be a perfect fit. OPEN GRILLE DESIGN Fractal Design Torrent Nano has an open grille & internal layout which supports a massive included 180 mm fan. The open interior provides breathing room for components & maximises performance for air & water cooling. MAXIMUM GPU COOLING POTENTIAL As performance evolves, so must cooling. The Torrent Nano boasts insane cooling potential despite its compact size. Its open layout interior, expansive base intakes & support for large bottom fans or radiators enables you to ramp up the performance whilst keeping your components cool & allowing your systems to breathe. The Dynamic X2 GP-18 is a powerful 180 mm fan that packs a mean punch in the air-flow department. Massive blades, stout 38 mm thickness, & a wide 300-1200 RPM range with PWM control allow the GP-18 to yield remarkably high airflow while remaining exceptionally quiet. EASY INSTALLATION & MAINTENANCE Boasting a handy cable management system, removable top bezel, sturdy, vibration-damped drive tray supporting a single HDD or dual SSDs with two optional mounting positions & dedicated SSD bracket with room for 2x 2.5” drives included the Torrent Nano holds many of the features of its bigger brother. ...

The Torrent is built to maximize cooling potential straight out of the box. Main standouts include a br&-new component layout, the open front grille & five included fans – two of which are our 180 x 38 mm Dynamic PWM or Prisma RGB fans custom-made to achieve maximum air cooling while maintaining controlled noise levels. Enabling excellent cooling performance (with or without water-loops), the Torrent is a perfect fit for high-end users who want a case that can keep up with an ever-expanding market of hardware upgrades. Main Features Open grille & 180 mm front fans optimized for maximum air intake Newly developed 180 x 38 mm Dynamic X2 PWM fans leverage power, size, & thickness for massive air-moving capacity

Includes:: five PWM fans (three 140 mm & two 180 mm) for balancing performance, cooling & noise New layout with expansive base intakes & extra-large bottom fan support offers exceptional GPU cooling Optional front & bottom nylon filters included, allowing the user to prioritize between dust filtering or even higher airflow Streamlined open interior provides plenty of breathing room for components & maximizes performance potential for both air & water cooling Comes with the new Nexus 9P Slim PWM fan hub pre-installed GPU support bracket that helps your GPU stay level (user assembled, instructions included) Comes with external cable straps for tidying up behind your computer Front fan brackets allow for unblocked airflow to the larger fans while catering to standard radiator sizes Removable top bezel & cable guides with cable straps make for easy installation & cable management Two sturdy steel drive trays with vibration-damping rubber grommets cushion 3.5" hard drives for smooth, quiet & reliable operation Four dedicated SSD brackets included Dual recessed channels in the base for adding LED strips & under-lighting effects (both available separately) Both front & bottom panel can support extra-thick radiators & push-pull fan configurations up to 420 mm Integrated support for a water-cooling reservoir on the motherboard tray Seven bridgeless expansion slots allow for extensive customization

...

Fractal Design Torrent White All airflow, no compromise. The Torrent is built to maximize cooling potential straight out of the box. Main standouts include a br&-new component layout, the open front grille & five included fans – two of which are our 180 x 38 mm Dynamic PWM or Prisma RGB fans custom-made to achieve maximum air cooling while maintaining controlled noise levels. Open grille & 180 mm front fans optimized for maximum air intake Newly developed 180 x 38 mm Dynamic X2 PWM or Prisma AL PWM ARGB fans (in the RGB version) leverage power, size, & thickness for massive air-moving capacity

Includes:: five PWM fans (three 140 mm & two 180 mm) for balancing performance, cooling & noise

...

The Torrent is built to maximize cooling potential straight out of the box. Main standouts include a br&-new component layout, the open front grille & five included fans – two of which are our 180 x 38 mm Dynamic PWM or Prisma RGB fans custom-made to achieve maximum air cooling while maintaining controlled noise levels. Enabling excellent cooling performance (with or without water-loops), the Torrent is a perfect fit for high-end users who want a case that can keep up with an ever-expanding market of hardware upgrades. Main Features Open grille & 180 mm front fans optimized for maximum air intake Newly developed 180 x 38 mm Dynamic X2 PWM fans leverage power, size, & thickness for massive air-moving capacity

Includes:: five PWM fans (three 140 mm & two 180 mm) for balancing performance, cooling & noise New layout with expansive base intakes & extra-large bottom fan support offers exceptional GPU cooling Optional front & bottom nylon filters included, allowing the user to prioritize between dust filtering or even higher airflow Streamlined open interior provides plenty of breathing room for components & maximizes performance potential for both air & water cooling Comes with the new Nexus 9P Slim PWM fan hub pre-installed GPU support bracket that helps your GPU stay level (user assembled, instructions included) Comes with external cable straps for tidying up behind your computer Front fan brackets allow for unblocked airflow to the larger fans while catering to standard radiator sizes Removable top bezel & cable guides with cable straps make for easy installation & cable management Two sturdy steel drive trays with vibration-damping rubber grommets cushion 3.5" hard drives for smooth, quiet & reliable operation Four dedicated SSD brackets included Dual recessed channels in the base for adding LED strips & under-lighting effects (both available separately) Both front & bottom panel can support extra-thick radiators & push-pull fan configurations up to 420 mm Integrated support for a water-cooling reservoir on the motherboard tray Seven bridgeless expansion slots allow for extensive customization

...

Fractal Design Venturi Hf-12 (120mm) Computer Cooling Fan Fractal Design Venturi HF-12. Type: Fan, Suitable for: Computer case, Fan diameter: 12 cm. Colour of product: Black, Grey, Cable length: 0.5 m. Power supply: 1.3 W, Maximum current: 0.2 A.

Width: 12 cm,

Depth: 12 cm,

Height: 2.5 cm. Bearing technology: FDB Product description The Venturi High Flow Series fans, HF-12 & HF-14, are optimized for low-restriction airflow environments, making them an excellent choice for computer case fans, or other low-restriction usage scenarios. Designed with a variety of performance-increasing & noise-reducing features, these fans can move an amazing amount of air compared to other fans at the same, minimal noise level. The HF-14 comes with two sets of solid vibration-dampening rubber corners: one for standard 140mm fan hole spacing (125mm) & one compatible with the standard 120mm hole spacing (105mm). The Venturi High Flow Series fans are ideal for those looking for a perfect balance between high performance & low noise built from sturdy, high quality materials. Key features Featuring true FDB-bearings, providing silent operation coupled with a long lifespan Equipped with a counter-balancing magnet in the hub that reduces the axial tension on the bearing, further protecting the longevity of the bearing Dense, sturdy construction, made from high-grade glass reinforced fiber reinforced thermoplasticpolymer with fan geometry that is optimized for a good balance between static pressure & maximum airflow, resulting in good performance in all usage scenarios Aerodynamically shaped thin stator struts (including wire strut), mimicking the design commonly found on airplane wings, delivering correct angles allowing for air to easily pass through reducing noise & unwanted turbulence. Stator struts are angled perpendicular to the blades, helping to reduce noise commonly emitted when the blades pass the struts. In effect, minimal noise that may be emitted will be constant & therefore almost inaudible to the ear. Strategically placed notches near the fan hub on the trailing edge of the blades, further reducing & diffusing humming noise produced when the blades pass the stator struts

Includes:: a "trip wire" on the rear side of the blades, near the leading edge. The trip wire technology, also commonly found in airplane wing designs, introduces a micro-turbulent layer that helps to combat the elements that negatively affect performance. The presence of the trip wire overall provides a more efficient & quiet fan environment. Delivers high precision due to high grade materials used, permitting the distance between the blades & frame to be as small as 1.2mm, contributing to a higher performance fan Featuring a powerful motor to maintain a reliable speed Comes with a low-speed adapter, for reducing the speed without the use of a fan controller

Includes:: vibration-dampening corners, from solid high-quality synthetic rubber on the fans 140mm fans come with an additional set of vibration-dampening corners are included that lends compatibility with 120mm fan mounts (105mm screw spacing). This enables the use of 140mm fans on many CPU coolers. Screws pass through the rubber only, not through plastic, therefore eliminating the chance of noise derived from rattling when in use Available in 120mm & 140mm fan sizes Specifications Design Cable length 0.5 m Colour of product Black, Grey Other features Bearing technology FDB Performance Airflow 141.7 m&sup 3;/h Fan diameter 12 cm Fan thickness 2.5 cm Maximum air pressure 1.22 mm H2O Maximum airflow 83.4 cfm Maximum spin speed 1400 RPM Mean time between failures (MTBF) 150000 h Minimum air pressure 0.89 mm H2O Minimum airflow 65.8 cfm Minimum spin speed 1100 RPM Mounting hole pattern (Wx D) 105 x 105 mm Noise level (high speed) 25.3 d B Noise level (low speed) 19 d B Suitable for Computer case Type Fan Power Maximum current 0.2 A Power supply 1.3 W Voltage 12 Technical details Fan connector 3-pin Weight &

Dimensions Depth 12 cm Height 2.5 cm Package depth 12.2 cm Package height 3 cm Package width 14.2 cm Weight 250 g Width 12 cm











...

Fractal Design Venturi Hf-14 (140mm) Computer Cooling Fan The Venturi High Flow Series fans, HF-12 & HF-14, are optimized for low-restriction airflow environments, making them an excellent choice for computer case fans, or other low-restriction usage scenarios. Designed with a variety of performance-increasing & noise-reducing features, these fans can move an amazing amount of air compared to other fans at the same, minimal noise level. The HF-14 comes with two sets of solid vibration-dampening rubber corners: one for standard 140mm fan hole spacing (125mm) & one compatible with the standard 120mm hole spacing (105mm). The Venturi High Flow Series fans are ideal for those looking for a perfect balance between high performance & low noise built from sturdy, high quality materials. Key features Featuring true FDB-bearings, providing silent operation coupled with a long lifespan Equipped with a counter-balanced magnet that reduces the axial tension on the bearing Features integrated vibration-dampening corners, made from solid high-quality synthetic rubber Dense, sturdy construction, made from high-grade glass reinforced fiber reinforced thermoplasticpolymer Fan geometry is optimized for a ground-breaking airflow, perfect for low-restriction usage scenarios such as computer case ventilation & low-density heatsinks or radiators. Aerodynamically shaped thin stator struts reduce noise & unwanted turbulence Strategically placed notches on the blades further reduce & diffuse any humming noise produced when the blades pass the stator struts The trip wire technology introduces a micro-turbulent layer that combats elements that negatively affect performance, resulting in quieter operation Featuring a powerful motor to maintain a reliable speed & a low-speed adapter for reducing the speed without the use of a fan controller 140mm fans come with an additional set of vibration-dampening corners are included that lends compatibility with 120mm fan mounts (105mm screw spacing). This enables the use of 140mm fans on many CPU coolers. Available in 120mm & 140mm fan sizes Specifications Fan HF-14 Size [mm] 140*140*25mm Screw hole pattern 125*125mm 105*105mm Connector 3-pin fan header Bearing FDB Number of blades 11 Rotational speed [RPM] 1200 Acoustical noise [d B (A)] 26.5 Maximum air flow [CFM] 118.2 Maximum air flow [m 3 /h] 200.8 Maximum pressure [mm H 2 O] 0.95 Actual input power [W] 2.2 Maximum rated input current [A] 0.3 Nominal input voltage [V] 12V Minimum startup voltage [V] 4V Low speed adapter speed 850 RPM Low speed adapter Static pressure 0.59 mm H2O Low speed adapter Air flow 78.5 CFM 133.4 m 3/h Low speed adapter Noise level 18.3 d B (A) MTBF [hours] 150, 000 Unit weight [g] 202 Package weight [g] 260 Cable length [mm] 500 Cable type Braided all-black ribbon wire ...

Celsius+ takes AIO water cooling to a new level with an ARGB-accented pump face, a fully redesigned block & an upgraded on-radiator PWM fan hub with ARGB support. Cool, quiet & colorful Stylish glass pump face with backlit logo & ARGB LED effects Get the balance right Our intelligent auto mode dynamically adjusts the fan & pump speeds for optimized silent performance €;;” & a simple twist of the pump face changes to PWM mode for full user control Tidier through technology ARGB-enabled PWM hub places all fan connections directly on the radiator for a clutter-free installation Forget the thermal paste With the Celsius+, the thermal paste is pre-applied to ensure a mess-free installation Colour- coordinated cooling Your options for controlling the colour effects of Celsius+ are continually growing, with current certifications including Asus AURA, Gigabyte Fusion, MSI Mystic Light, Razer Chroma & ASRock Polychrome support Mounting made easy Supports the most common sockets for both Intel & AMD Up our sleeves Braided tube sleeves readily contain both the fan control cables & ARGB wires ...

Widening the Range Building on the core functionality of market favorites like Dynamic & Prisma, the Aspect series brings an exciting new aesthetic to the Fractal range of fans. Notable features include aerodynamic stator struts for lower turbulence, Trip Wire technology for enhanced blade efficiency, rifle bearings & built-in chaining support to simplify cable management. Features Less turbulence thanks to aerodynamic stator struts. Trip Wire technology introduces a micro-turbulent layer for enhanced blade efficiency. Supports chaining to simplify cable management. Rifle bearings – more efficient than standard sleeve. Combines aesthetic design & reliable performance. PWM control with a wide RPM speed range (PWM versions only). Available in black or white. Fits standard 120 mm (105 x 105 hole pattern). ...

Widening the Range Building on the core functionality of market favorites like Dynamic & Prisma, the Aspect series brings an exciting new aesthetic to the Fractal range of fans. Notable features include aerodynamic stator struts for lower turbulence, Trip Wire technology for enhanced blade efficiency, rifle bearings & built-in chaining support to simplify cable management. Features Less turbulence thanks to aerodynamic stator struts. Trip Wire technology introduces a micro-turbulent layer for enhanced blade efficiency. Supports chaining to simplify cable management. Rifle bearings – more efficient than standard sleeve. Combines aesthetic design & reliable performance. PWM control with a wide RPM speed range (PWM versions only). Available in black or white. Fits standard 140 mm (125 x 125 hole pattern). ...