Customer note: Stock from September 27th 2011 onwards is the new USB3.0 version of the define R3. There is 1x USB3.0 port on the front panel as well as 2x USB2.0 ports A new, enhanced version of the bestselling Fractal Design Define R2 case. This is the R3 Define Arctic White Case. Improvements over the Fractal Design Define R2 include: * enhanced air flow with updated fans * enhanced noise absorbing material * Bigger hole in M/B plate for mounting of CPU Coolers * enhanced cable routing possibilities * Reset button, located behind the front panel door * Many small quality improvements, including enhanced scratch resistant coating The hugely popular Fractal Design Define R2 case has just been improved! The Define R3 reaches new heights in combining stylish, contemporary design with maximum functionality & noise absorbing features. The minimalistic, yet stunning front panel design, fitted with noise absorbing material on the inside, creates an aura of exclusivity. Features enhanced model over Fractal Design Define R2 stunning front panel design Patent pending Modu Vent™ design
- removable vents! Pre-fitted with dense, noise absorbing material Motherboard tray cut-out, allows easy access to rear of motherboard Eight HDD-trays, with silicone mounting Can accommodate up to seven 120/140mm fans, two supplied PCI fan controller for 3 fans included Easily removable front fan filters with clip-on holders for 120mm fans The sleek interior is matched with pre-fitted, dense noise absorbing material on the side panels, efficiently absorbing noise & vibrations. You can fit an astonishing total of eight 3.5" hard drives into this case, using the user friendly HDD-trays. All HDDs are mounted using black silicone mounts to reduce vibrations. The PSU is mounted in the bottom of the case, where it rests on four rubber pads. There is also a convenient pull-out air filter beneath PSU, this filters the air that comes into the PSU, assuming you are using a power supply with a 120mm fan. Are you one of those users always ending up with a case full of tangled cables? Not any more
- the Define R3 offers a convenient & good looking way of hiding them away. The motherboard has rubber covered holes in which you can easily route the cables behind the motherboard, keeping things nice & tidy. There is also a cut-out on the motherboard tray. This is ideal if you are a user that changes their CPU cooler often. The cut-out will allow you to change CPU cooler brackets without having to remove the motherboard from the system. This hole has been increased in size compared to the Define R2, providing greater compatibility. At the front of the case you will find space for two 120mm fans, with one 120mm fan supplied. Both fans have air filters & are designed to introduce cooler air into the case as well as aid cooling of the hard drives. Youll also notice that the inside of the door is coated in noise reducing foam. The only down side to this is that the Define R2 can not accommodate a fan controller that fits into a 5.25" drive bay due to space restrictions. But that should not be a problem because Fractal Design have supplied a very handy little fan controller that uses up one PCI slot, which can control up to three fans! Graphics card & CPU cooler compatibility The Define cases are very roomy, which means they are accommodate some of the largest graphics cards & CPU coolers available. Graphic cards up to 290mm in length are compatible. As for CPU coolers, the maximum height is 165mm. This means virtually all of our CPU coolers will be compatible with this chassis. Specifications: Dimensions 207.40 x 440 x 521.2mm (Wx Hx D) Weight 12.5kg Motherboard Compatibility Mini ITX, Micro ATX & ATX Power Supply Compatibility Standard ATX, can accommodate long PSUs PCI/AGP Card Compatibility Full size (up to 290 mm long) 3.5" Drive Bays 8, all SSD compatible 5.25" Drive Bays 2, one bay converts to 3.5" for floppy or card reader Roof Cooling Fans Space for two 120mm, none supplied Rear/ Side Cooling Fans Rear
- space for one 120mm fan, supplied; Side
- space for 140 or 120mm fan not supplied Front/ Floor Cooling Fans Front
- space for two 120mm fans (both with filters), one supplied; Floor
- space for one 120mm fan (with filter), not supplied Expansion Card Slots 7, with sleek white painted brackets Front I/O Ports 2x USB (Universal Serial Bus) 2.0, 1x e SATA & Audio I/O Accessories PCI fan controller, controllers up to 3 fans Warranty 24 months





...

Customer note: Stock from September 27th 2011 onwards is the new USB3.0 version of the define R3. There is 1x USB3.0 port on the front panel as well as 2x USB2.0 ports A new, enhanced version of the bestselling Fractal Design Define R2 case. This is the Fractal Design Define R3 Black Pearl Case. Improvements over the Fractal Define R2 include: * enhanced air flow with updated fans * enhanced noise absorbing material * Bigger hole in M/B plate for mounting of CPU Coolers * enhanced cable routing possibilities * Reset button, located behind the front panel door * Many small quality improvements, including enhanced scratch resistant coating The hugely popular Fractal Define R2 case has just been improved! The Fractal Design Define R3 reaches new heights in combining stylish, contemporary design with maximum functionality & noise absorbing features. The minimalistic, yet stunning front panel design, fitted with noise absorbing material on the inside, creates an aura of exclusivity. Features enhanced model over Fractal Design Define R2 stunning front panel design Patent pending Modu Vent™ design
- removable vents! Pre-fitted with dense, noise absorbing material Motherboard tray cut-out, allows easy access to rear of motherboard Eight HDD-trays, with silicone mounting Can accommodate up to seven 120/140mm fans, two supplied PCI fan controller for 3 fans included Easily removable front fan filters with clip-on holders for 120mm fans The sleek interior is matched with pre-fitted, dense noise absorbing material on the side panels, efficiently absorbing noise & vibrations. You can fit an astonishing total of eight 3.5" hard drives into this case, using the user friendly HDD-trays. All HDDs are mounted using black silicone mounts to reduce vibrations. The PSU is mounted in the bottom of the case, where it rests on four rubber pads. There is also a convenient pull-out air filter beneath PSU, this filters the air that comes into the PSU, assuming you are using a power supply with a 120mm fan. Are you one of those users always ending up with a case full of tangled cables? Not any more
- the Fractal Design Define R3 offers a convenient & good looking way of hiding them away. The motherboard has rubber covered holes in which you can easily route the cables behind the motherboard, keeping things nice & tidy. There is also a cut-out on the motherboard tray. This is ideal if you are a user that changes their CPU cooler often. The cut-out will allow you to change CPU cooler brackets without having to remove the motherboard from the system. This hole has been increased in size compared to the Fractal Define R2, providing greater compatibility. At the front of the case you will find space for two 120mm fans, with one 120mm fan supplied. Both fans have air filters & are designed to introduce cooler air into the case as well as aid cooling of the hard drives. Youll also notice that the inside of the door is coated in noise reducing foam. The only down side to this is that the Fractal Design Define R2 can not accommodate a fan controller that fits into a 5.25" drive bay due to space restrictions. But that should not be a problem because Fractal Design have supplied a very handy little fan controller that uses up one PCI slot, which can control up to three fans! Graphics card & CPU cooler compatibility The Fractal Define cases are very roomy, which means they are accommodate some of the largest graphics cards & CPU coolers available. Graphic cards up to 290mm in length are compatible. As for CPU coolers, the maximum height is 165mm. This means virtually all of our CPU coolers will be compatible with this chassis. Specifications: Dimensions 207.40 x 440 x 521.2mm (Wx Hx D) Weight 12.5kg Motherboard Compatibility Mini ITX, Micro ATX & ATX Power Supply Compatibility Standard ATX, can accommodate long PSUs PCI/AGP Card Compatibility Full size (up to 290 mm long) 3.5" Drive Bays 8, all SSD compatible 5.25" Drive Bays 2, one bay converts to 3.5" for floppy or card reader Roof Cooling Fans Space for two 120mm, none supplied Rear/ Side Cooling Fans Rear
- space for one 120mm fan, supplied; Side
- space for 140 or 120mm fan not supplied Front/ Floor Cooling Fans Front
- space for two 120mm fans (both with filters), one supplied; Floor
- space for one 120mm fan (with filter), not supplied Expansion Card Slots 7, with sleek white painted brackets Front I/O Ports 2x USB (Universal Serial Bus) 2.0, 1x USB3.0 & Audio I/O Accessories PCI fan controller, controllers up to 3 fans Warranty 24 months





...

Customer note: Stock from September 27th 2011 onwards is the new USB3.0 version of the define R3. There is 1x USB3.0 port on the front panel as well as 2x USB2.0 ports A new, enhanced version of the bestselling Fractal Design Define R2 case. This is the R3 Define Silver Case. Improvements over the Define R2 include: * enhanced air flow with updated fans * enhanced noise absorbing material * Bigger hole in M/B plate for mounting of CPU Coolers * enhanced cable routing possibilities * Reset button, located behind the front panel door * Many small quality improvements, including enhanced scratch resistant coating The hugely popular Define R2 case has just been improved! The Define R3 reaches new heights in combining stylish, contemporary design with maximum functionality & noise absorbing features. The minimalistic, yet stunning front panel design, fitted with noise absorbing material on the inside, creates an aura of exclusivity. Features enhanced model over Define R2 stunning front panel design Patent pending Modu Vent™ design
- removable vents! Pre-fitted with dense, noise absorbing material Motherboard tray cut-out, allows easy access to rear of motherboard Eight HDD-trays, with silicone mounting Can accommodate up to seven 120/140mm fans, two supplied PCI fan controller for 3 fans included Easily removable front fan filters with clip-on holders for 120mm fans The sleek interior is matched with pre-fitted, dense noise absorbing material on the side panels, efficiently absorbing noise & vibrations. You can fit an astonishing total of eight 3.5" hard drives into this case, using the user friendly HDD-trays. All HDDs are mounted using black silicone mounts to reduce vibrations. The PSU is mounted in the bottom of the case, where it rests on four rubber pads. There is also a convenient pull-out air filter beneath PSU, this filters the air that comes into the PSU, assuming you are using a power supply with a 120mm fan. Are you one of those users always ending up with a case full of tangled cables? Not any more
- the Define R3 offers a convenient & good looking way of hiding them away. The motherboard has rubber covered holes in which you can easily route the cables behind the motherboard, keeping things nice & tidy. There is also a cut-out on the motherboard tray. This is ideal if you are a user that changes their CPU cooler often. The cut-out will allow you to change CPU cooler brackets without having to remove the motherboard from the system. This hole has been increased in size compared to the Define R2, providing greater compatibility. At the front of the case you will find space for two 120mm fans, with one 120mm fan supplied. Both fans have air filters & are designed to introduce cooler air into the case as well as aid cooling of the hard drives. Youll also notice that the inside of the door is coated in noise reducing foam. The only down side to this is that the Define R2 can not accommodate a fan controller that fits into a 5.25" drive bay due to space restrictions. But that should not be a problem because Fractal Design have supplied a very handy little fan controller that uses up one PCI slot, which can control up to three fans! Graphics card & CPU cooler compatibility The Define cases are very roomy, which means they are accommodate some of the largest graphics cards & CPU coolers available. Graphic cards up to 290mm in length are compatible. As for CPU coolers, the maximum height is 165mm. This means virtually all of our CPU coolers will be compatible with this chassis. Specifications: Dimensions 207.40 x 440 x 521.2mm (Wx Hx D) Weight 12.5kg Motherboard Compatibility Mini ITX, Micro ATX & ATX Power Supply Compatibility Standard ATX, can accommodate long PSUs PCI/AGP Card Compatibility Full size (up to 290 mm long) 3.5" Drive Bays 8, all SSD compatible 5.25" Drive Bays 2, one bay converts to 3.5" for floppy or card reader Roof Cooling Fans Space for two 120mm, none supplied Rear/ Side Cooling Fans Rear
- space for one 120mm fan, supplied; Side
- space for 140 or 120mm fan not supplied Front/ Floor Cooling Fans Front
- space for two 120mm fans (both with filters), one supplied; Floor
- space for one 120mm fan (with filter), not supplied Expansion Card Slots 7, with sleek white painted brackets Front I/O Ports 2x USB (Universal Serial Bus) 2.0, 1x e SATA & Audio I/O Accessories PCI fan controller, controllers up to 3 fans Warranty 24 months





...

Customer note: Stock from September 27th 2011 onwards is the new USB3.0 version of the define R3. There is 1x USB3.0 port on the front panel as well as 2x USB2.0 ports Define R3 – the successor to the best selling Define R2! Now available with a bunch of improvements, including enhanced cable routing, air flow & bigger hole in M/B plate for mounting CPU coolers. A detailed list of improvements; Improvements from R2 enhanced air flow with updated fans enhanced noise absorbing material Bigger hole in M/B plate for mounting of CPU Coolers enhanced cable routing possibilities Reset button, located behind the front panel door Many small quality improvements, including enhanced scratch resistant coating A new generation of style! The Define R3 case is reaching new heights in combining stylish, contemporary design with maximum functionality & noise absorbing features. The minimalistic, yet stunning front panel design, fitted with noise absorbing material on the inside, creates an aura of exclusivity. The patent pending feature Modu Vent™, in which you can choose whether to have side & top panels open or not, makes the case appealing for users seeking optimal silence, as well as the performance hungry ones. The sleek black interior is matched with pre-fitted, dense noise absorbing material on the side panels, efficiently absorbing noise & vibrations. You can fit an astonishing total of eight hard drives into this case, using the user friendly HDD-trays. All painted in a nice white color & using black silicone mounts. PSU is mounted in the bottom of the case, with a convenient pull-out filter beneath it. Are you one of those users always ending up with a case full of tangled cables? No more. The Define R3 offers a convenient & good looking way of hiding them away. The motherboard has rubber covered holes in which you can easily route the cables behind the motherboard. Key features * stunning front panel design * Patent pending Modu Vent™ design, allowing the user to either have optimal silence or optimal airflow * Pre-fitted with dense, noise absorbing material * 8 (!) white painted HDD-trays, with silicone mounting * A total of 7 fan slots (2x 120mm in front, 2x 120/140mm in top, 1x 120mm in back, 1x 120/140mm in side panel, 1x 120/140mm in bottom) * 2x 120mm Fractal Design 120mm fans included * Fan controller for 3 fans included * Easily removable front fan filters with clip-on holders for 120mm fans * Supports graphic card lengths up to circa 290mm & CPU coolers with height of maximum circa 165mm * Supports PSUs with a depth of maximum circa 170mm, when using bottom 120/140mm fan location. When not using the bottom 120/140mm fan location, the case supports also longer PSUs, typically 200-220mm. Cooling system * Fan controller for 3 fans included * 1 rear Fractal Design 120mm @ 1350rpm included * 1 front Fractal Design 120mm @ 1350rpm included * 1 front 120mm fan (optional) * 1 bottom 120mm/140mm fan (optional) * 1 side panel 120mm/140mm fan (optional) * 2 top 120mm/140mm fan (optional) Specifications * 8x 3, 5 inch HDD trays, compatible with SSD! * 2x 5, 25 inch bays, with 1x 5, 25>3, 5 inch converter included * On top of front panel: 2x USB (Universal Serial Bus) 2.0, 1x e SATA & Audio I/O * No PSU included (removable filter below PSU) * M/B compatibility: Mini ITX, Micro ATX & ATX * 7x expansion slots with sleek white painted brackets * Supports graphic card lengths up to ~290mm * Supports CPU coolers with height of ~165mm * Supports PSUs with a depth of maximum circa 170mm, when using bottom 120/140mm fan location. When not using the bottom 120/140mm fan location, the case supports also longer PSUs, typically 200-220mm. * Case size (Wx Hx D): 207.40x 440x 521.2mm * Net weight: 12.50kg ...

Case

Specification Define R3 – the successor to the best selling Define R2! Now available with a bunch of improvements,

...

The Fractal Design Define R4 is the midi tower in the Define Series of computer cases offering minimalistic & stunning Scandinavian ...

The Fractal Design Define R4 is the latest in the Define Series of computer cases offering minimalistic & stunning Scandinavian ...

The Fractal Design Define R4 is the latest in the Define Series of computer cases offering minimalistic & stunning Scandinavian ...

Case Description The Fractal Design Define R4 is the latest in the Define Series of computer cases offering minimalistic & stunning ...

The Fractal Design Define R4 is the latest in the Define Series of computer cases offering minimalistic & stunning Scandinavian ...