The Mi Home Adapter is a control only product. The Mi Home Adapter means that you can use all the control features in the Mi Home App including simple on/off, timers & geofencing. The adapters are also controllable via the Mi Home remote control. This product only receives communications from the Mi Home Gateway & does not send a response therefore it is not recommended for use in safety critical applications. Specifications Radio Frequency: 433.92 Mhz (ISIM band) Transmitter Output power: 3 V /+12 d Bm /27 m A Rating: 220
- 250V~ 50 Hz, 13A, 3000W max. Socket Energy Efficiency: Consumes < 0.3W in Standby Receiving Range: Typically 25 meters in open area Applications: Domestic appliances with a standard UK plug to BS1363
...

The Mi Home Adapter Plus combines the functions of the monitor & the control products. The adapter means that you can monitor the amount of electricity being used by the appliance plugged in to the socket. Using the Mi Home App you are able to group these & then explore how much energy is being used by different sets of adapters. The App also shows this data over time & as a cost by using your electricity tariff. The Mi Home Adapter Plus also means that you can use all the control features in the Mi Home App including simple on/off, timers & geofencing. The Mi Home Adapter Plus is a transmitter & transceiver & therefore will let the user know when an action has been carried out.

Specification Maximum load: 3000W Maximum current: 13A Voltage range: 230-250V 50 Hz ac Plug & socket: BS 5733 & the relevant clauses of BS 1363 Transmission Frequency: 434.300 MHz Protocol: Open Things (16663DOC14) Plug adapter housing in UK format to BS1363 Location: Indoor use only

...

The Mi Home Double Wall Socket is a control only product. Each socket is individually controllable & you are able to use all the control features in the Mi Home App including simple on/off, timers & geofencing on each socket individually. The adapters are also controllable via the Mi Home remote control. This product only receives communications from the Mi Home Gateway & does not send a response therefore it is not recommended for use in safety critical applications. Take control of your electrical devices wherever you are FREE i OS & Android App, plus browser interface Convenient & seem less integration with your existing wall sockets Switch on/off via the Home App or set timers, use geo fencing or IFTTT to control automatically Requires installation in place of your existing wall sockets or a suitable 25mm patters box & ring main connection ...

Mi Home Eco Starter Pack (Home Gateway + 2 x Monitor Adapter + 1 x Whole House Monitor) Combining the Mi Home Gateway with two individual power monitor adapters & a whole-house energy monitor this useful power management solution will quickly provide you with accurate costs of both historical & forecast energy use. The whole house monitor gives you the full picture of how much energy you are using at any given point, whilst the individual appliance monitors help you understand where exactly your energy costs are coming from. For example many white goods have multiple settings to choose, but whilst the results are often the same the cost for running a particular programme varies greatly. The Eco pack provides you with useful data, with energy measured in monetary terms as well as k Wh so it’s even easier to understand how much you will be expecting to pay when the next bill pops through the letterbox. Box Contains 1 x Mi Home Gateway, 2 x Mi Home plug-in energy monitor adapters, 1 x whole house energy monitor, 1 x power supply, 1 x 1M ethernet cable, 1 x USB (Universal Serial Bus) power lead, 3 x batteries for whole house monitor ...

The Gateway device provides a central hub in a domestic or small commercial environment for a range of smart home related products. These include plug adapters for remote control, power monitoring, wall sockets & lights switches, radiator valves for heating control & whole house monitor. The Gateway is able to store timers locally & therefore if there is a connectivity issue the Gateway will still control the Mi Home system. This is a very important safety feature Specifications Input voltage: 5VDC Input current: 150m A max Power connection: Micro USB Ethernet connection: RJ45 Standby power: 0.3W Transmission Frequency: 434.300 MHz ...

Mi Home Heating Starter Pack (Home Gateway + 3 x Radiator Valves) Add zoned heating control to any existing central heating system with the Mi Home heating bundle. 3 smart TRV’s [ Thermostatic Radiator Valves] plus the Mi Home gateway are included in this bundle to get you started, & additional radiator valves can be added at any time. Zoned heating on a room-by-room basis ensures you are only heating the rooms you are using & the energy savings this can make is substantial – on average around 25%. Further, the Mi Home app means that you can control your radiators using geofencing & even external information from the internet such as weather forecasts & dusk ‘til dawn times so you never need to set up your heating again. Fitting the radiator valves is a straightforward DIY task if you already have standard TRV’s – easily identified by having either numbers, roman numerals or red/blue coloured dots on the valve. If you have these in place then no tools are required to change them over for the Mi Home mart TRV’s. If you do not have existing TRV’s then a plumber will be needed to fit TRV bases head of installing the Mi Home smart valves. ...

Product Description This 3kw Relay requires the Mi Home Gateway to work, available separately. This product should be installed by a qualified electrician. A true whole-of house Smart Home system. Take control of heating, lighting & electrical devices from wherever you are through the user-friendly App or web portal. Pair the Mi Home Gateway with your choice of electrical sockets, plug-in adapters, light switches & Smart Radiator valves. Start with as much or as little as you wish, the system is completely modular & can be built up over time to offer you the most flexibility. Set up takes less than one minute; simply download the App from i Tunes or the Google Play store & follow the simple on-screen instructions. Once your gateway is active you can pair it with your devices to allow total dynamic control from wherever you are in the world. Optional energy monitors allow you to see real-time energy use for the whole of your house, but also right down to appliance level. Set timers & schedules for your heating, set security functions for your lights, & find out how much your tumble drier is costing you each time you use it. Add dynamic control with Geofencing
- automatically turn on your driveway lights when you are 1/4 mile from home. Automatically switch off your heating when you leave your house. You can customise which devices to include in the Geofencing control, & how far away you are when you want them to activate. Connect your devices to IFTTT [ If This Then That] for true connected home functionality. Why not schedule your kitchen light to flash every time you are mentioned in a Tweet? Or switch on your greenhouse heater when the local weather service predicts a frost? Even your kettle can be told to turn on automatically when you have an i Cal or Outlook event in your diary. Your imagination is the only limit….. The Mi Home Gateway requires a broadband internet connection to work. You will need to connect the Gateway to your router using the supplied Ethernet cable. Check that you have an empty Ethernet port on the back of your router before buying. On its own this Gateway provides no functionality. You will need to purchase additional Mi Home products, such as Adapters, Wall Switches or Radiator Valves to control your home. You will need an Android or i OS device to get the most out of the Mi Home system, though all functions can be accessed via any web browser. Geofencing functionality requires Mobile Data to be enabled on your device. This may incur additional costs for which you are responsible. Your network provider will be able to tell you more about Mobile Data costs. As with any device reliant on an internet connection, sending a command to the Mi Home system is no guarantee that it will arrive. You should therefore take a common sense approach to switching electrical devices when away from the home. If you would not be happy to leave a device switched on unattended whilst away from the home then you should not use the Mi Home system for this purpose. Therefore neither the manufacturer or reseller accepts any liability from damage, injury or loss caused by the use of the Mi Home system. Box Contains 1 x 3KW RF Relay 1 x Manual
...

Product Description This product requires the Mi Home Gateway to work. Control your existing light fittings & bulbs using your smartphone, tablet or PC. Mi Home light switches are a retro fit solution to adding a sense of security, creating moods & automating your home. Designed to work as a replacement of your existing live in/out switch, no neutral wire is required. You should consult a qualified electrician if you are unsure as to whether this product will work with your wiring before purchase if you are in any doubt. Installation in to a 25mm back box or deeper is required. Once installed simply pair your switch with the gateway in either the App or via the web portal. Set timers, groups & name your lights for simple control. Use your location via Geo-fencing to turn your lights on automatically to welcome you home. Connect to IFTTT to control your lights from web services, such as flashing your lights when your phone rings on silent, or add dusk till dawn control of your existing outside lights. You only need one gateway & you can add additional Mi Home accessories as & when you wish to create your own Smart Home solution. A complete range of products offers the ability to build a modular system that suits your needs. IMPORTANT: This light switch receives commands only & does not report its live status back to the App or web portal. ** Energenie recommends that dimmable light sources are used with all Mi Home light switches, such as Dimmable LED. Not suitable for any fluorescent lamps.** This is a radio controlled switch for the switching of mains power to lighting & appliances up to 250W. Only the Line is switched to the load. Switching is initiated either by radio control or manually by pressing the button on the housing. It is compatible with Mi Home Remote Control (MIHO003) & the Mi Home network. It is a receive-only device operating in the 433 M Hz ISM short-range band using OOK modulation. MIHO026 Back Angled.jpg MIHO026 Back Angled.jpg Technical Information Rating: 220
- 240V~ 50 Hz, 1A, 250W max Terminal Connections: L-IN, L-OUT Radio: 433.92 M Hz ISM short range; OOK, simplex one way Range: Approx. 15-20m in closed field; 30m in open area
...

The Mi Home Monitor Adapter is a monitor only product. The Mi Home Monitor Adapter means that you can monitor the amount of electricity being used by the appliance plugged in to the socket. Using the Mi Home App you are able to group these & then explore how much energy is being used by different sets of adapters. The App also shows this data over time & as a cost by using your electricity tariff. This product constantly sends energy usage information to the Mi Home gateway. It does not provide for control of the devices plugged in to it. The Adapter Plus offers both energy monitoring & switching of the device connected to it https://energenie 4u.co.uk/catalogue/product/MIHO005. Requires the Mi Home Gateway. The Monitor adapter is part of the Mi Home home automation range. The Monitor adapter means that you can monitor the power being used by an attached appliance. The Mi Home monitor adapter sends energy data information back to the App. This means that you can monitor how much energy each device is using & also track it over time. The Monitor adapter cannnot be switched by the app & only transmits information.

Specification Maximum load: 3000W Maximum current: 13A Voltage range: 230-250V 50 Hz ac Plug & socket: BS 5733 & the relevant clauses of BS 1363 Transmission Frequency: 434.300 MHz Protocol: Open Things (16663DOC14) Plug adapter housing in UK format to BS1363 Location: Indoor use only

...

The Mi Home Double Wall Sockets is a radio controlled unit with individual power switching for each socket for use with appliances up to 3k W in each socket. Only the Live feed is switched to the load. Switching is initiated either by radio control signal or manually by pressing the button on the housing. Over 12 months battery life with low battery warning Requires Gateway (MIHO001) to function. Take control of your electrical devices wherever you are FREE i OS & Android App, plus browser interface Convenient & seamless integration with your existing wall sockets Switch on/off via the Mi Home App or set timers, use geofencing or IFTTT to control automatically Requires installation in place of your existing wall sockets or a suitable 25mm pattress box & ring main connection ...