Save on space
- not on possibilities! The black MA-M1000 is a compact m ATX PC case in Alu-Optic. Despite it being compact, the
...

Simple elegance combined with maximum functionality The Mask is a spacious ATX case in a reduced & timeless design. The bezel has an aluminium-optic finish, while the door in the front ensures independent installation of hard drives for an always discreet look. Generous space available With a generous width of 210 mm, smooth installation of tower coolers with a height of up 170 mm is possible. The Mask case offers, in addition, a variety of possibilities for the installation & inconspicuous wiring of all components. Extra-long graphics cards up to a maximum of 41.5 cm can be installed due to the modular hard drive management. Even at maximum capacity with 2.5" hard drives/SSDs, the Mask still provides sufficient room for VGA cards up to 32.5 cm in length. Fan Configuration Behind the discreetly designed air intakes in the front, there are two preinstalled 120 mm low noise fans & an additional 120 mm fan on the back. Thus, the Mask is well prepared for the cooling of high-performance components. Front ports Two USB (Universal Serial Bus) 3.0 ports, two audio ports as well as two USB (Universal Serial Bus) 2.0 ports are quickly accessible & discreetly hidden behind two flaps on the top of the front panel. In the event that the motherboard does not have an internal USB (Universal Serial Bus) 3.0 connector, the two USB (Universal Serial Bus) 3.0 interfaces can also be optionally connected & operated in USB (Universal Serial Bus) 2.0 mode. Installation options for drives The case features two 5.25" drive bays for the screwless installation of optical drives. For the installation of card readers or other devices in a 3.5" format, a slot is available. Up to three 3.5" hard drives as well as four 2.5" hard drives/SSDs can be mounted without screws with the enclosed rails in the rack system. in addition, if required, another 2.5" SSD/hard drive can be fastened to the case floor.

Features: ATX case 2x 5.25" drive bays (external) 1x 3.5" drive bay (external) 4x 2, 5" drive bays for hard drives/SSDs (rack-mounted system) in modular design 3x 3.5" hard drive bays (rack-mounted system) 1x 2.5" installation option for hard drives/SSDs (rack-mounted system) Installation rails for hard drives/SSDs (3x 3.5", 4x 2.5") included Top I/O: 2x USB (Universal Serial Bus) 3.0 (internal 19-pin mainboard connector incl. USB2.0 plug), 2x USB (Universal Serial Bus) 2.0, 2x Audio Quick fasteners for ODDs 2 openings for water coolers Cable management system Dimensions: 490 x 210 x 450 mm (L x W x H) Weight: ~6.0kg Fan configuration: Case front 2x 120 mm fan (preinstalled) Backside 1x 120 mm fan (preinstalled) Compatibility: Max. Length, graphics cards 32.5/41.5 cm (when removing middle hard drive cage) Max. Height, CPU cooler 17.0 cm Max. Length, power supply 30 cm

...

Let your hardware emerge from the deep darkness of your room. The NIGHT SHARK, our brawniest PC case so far, has been especially developed for high-performance gaming set-ups which are made to be seen. Not only have we provided this ATX midi tower with a snappy front panel & a showroom window made from tempered glass
- but this time, we’ve turned our usual design on its head: The power supply tunnel is now on top – right on the water line of the shark’s fin. Thus, underneath, the hardware can be viewed in all its wonder: from the radiator, glowing in neon light on the bottom panel, across the illuminated RAM modules, up to the eye-catching fan of the power supply. Choose Your Case, Cooling & Colours There is more than just one species of NIGHT SHARK, providing you with a choice of fans for the desired cooling & illumination. The NIGHT SHARK RGB is equipped with one fan on the back & two fans at the front, all with addressable RGB LEDS. An LED control with 14 lighting modes is supplied with the case. The NIGHT SHARK Blue & the NIGHT SHARK Red are a little less wild & have LED fans in the corresponding colors. The NIGHT SHARK Lite, on the other h&, swims around without fans, ready to be caught & equipped with your own complete choice of airflow systems. All these species do have one thing in common: they offer more space for additional fans or for water cooling. Handy, extra-long slots are provided for installing the water cooling tank. Voracious Appetite for Hardware! Since high-performance hardware generally needs more space, we’ve utilized the inside of the NIGHT SHARK to its maximum: In addition to the usual form factors, the case is also ready for mainboards with dual or multiple processors (SSI EEB), & it can easily eat other big chunks, such as graphics cards with a maximum length of 42 cm. The adjustable VGA holder helps support the weight of the graphics card, thus eliminating potential bending & damage to the hardware. Inside the tunnel, on top of the case, there is room for a power supply measuring up to 29.5 cm including cables. The height of the CPU cooler can be 16 cm. & there’s enough appetite for more: Up to three 3.5" hard drives & up to five 2.5" drives will have room inside the shark’s stomach. As an extra snack, a 5.25" drive can be installed in the front panel. Compatibility Mainboard Mini-ITX, Micro-ATX, ATX, E-ATX, SSI CEB, SSI EEB Max. Length Graphics Cards 42 cm*** Max. Height CPU Cooler 16 cm Max. Length Power Supply 29.5 cm Max. Height Radiator incl. Fan (Top) 14.5 cm Max. Height Radiator incl. Fan (Front) 14.5 cm
...

The PURE STEEL is a spacious ATX midi tower with a body completely made from steel. Its generous showroom, viewed through the tempered glass side panel, is ideally suited for a tabletop presentation of the high-end hardware inside. The minimalist design of the casing serves as a blank canvas for creative modding ideas. Clearing the Stage for High-end Hardware. The front panel has a completely minimalist design, so nothing distracts from the clearly displayed hardware. The tempered glass side panel thus becomes the actual front of the case, allowing the case interior to be the stage for presenting the installed hardware to the admiring audience. Designed for Modding. The minimalist design, in black or white, gives free reign to a multitude of modding ideas. The steel case provides an optimal surface for painting & affixing. Extra Holder for Graphic Cards. To prevent any sagging of heavier high-end graphics cards, a graphics card holder with a rubberized surface is already installed inside the PURE STEEL. Generous Interior. In addition to mainboard form factors up to E-ATX, the PURE STEEL has room for radiators up to 360 mm or for up to six fans. The length of the graphics card can be 42 cm. The height of the CPU cooler can be 16 cm, & the power supply can have a length of up to 29.5 cm. Three Case Versions. The case is available in a black or white version, each with a preinstalled 120 mm fan at the back & another 120 mm fan on the bottom panel. In addition, an RGB version is available with a black chassis & four preinstalled 120 mm addressable RGB fans: three on the underside of the case & one at the back. Full Control of Illumination. The RGB version of the PURE STEEL is supplied with an 8-Port Addressable RGB Controller for digitally addressable RGB LEDs. The controller can be used either with compatible mainboards (which have 3-pin addressable RGB headers) or completely manually. With the manual control, up to 14 lighting modes are available, which can be selected using the reset button on top of the case. ...

Sharkoon QB One Mini-ITX Case Compact, Elegant & High Quality The all-black QB ONE Mini-ITX PC case offers maximum flexibility within the smallest of space. Thanks to its sophisticated layout, the high quality case offers more than enough room for all needed components. With its compact

Dimensions of only 36.8 x 22.5 x 18.0 cm (L x W x H), it is ideal for mobile & space-saving usage. The elegant design is recommended for use in the living room, for example, as a powerful gaming PC. Thanks to the clever arrangement of the controls & ports, the case can be used both horizontally & vertically. In addition, conventional ATX power supplies can be installed, in which the use of SFX power supplies provide even more space. Ideal Ventilation Options A quiet 120 mm fan is pre-installed at the top &, if needed, an additional 120 mm fan can also be mounted. For optional water cooling of the system, the top also has room for a 240 mm radiator. Ideal: All side panels offer generous ventilation openings & are all equipped with dust filters. A clear advantage for built-in graphics cards is the fresh air perfectly supplied via the side openings. In order to further optimize the ventilation, an 80 mm fan can be mounted in the rear. Modern Connectivity In the front, two USB (Universal Serial Bus) 3.0 & two USB (Universal Serial Bus) 2.0 ports provide easy access for connecting peripheral devices. In addition, the QB ONE has two audio ports for convenient use of a headset. Versatile Mounting Options The QB ONE accommodates the installation of a powerful dual-slot graphics card, with a maximum length of up to 31.5 cm. In addition, up to two 3.5" hard drives or two 2.5" HDD/SSDs can be installed. An additional 2.5" HDD/SSD can be mounted in the back of the case, instead of an 80 mm fan. CPU coolers with a maximum height of up to 15 cm can also be used. For easy mounting of a cooler, the case provides an appropriate CPU cooler cutout. Practical thumbscrews simplify the opening as well as the closing of the case. Specifications: General: Form Factor: Mini-ITX Expansion Slots: 2 Interior Painting: Yes Side Panel: Metal Weight: 3.0kg

Dimensions (L x W x H): 36.8 x 22.5 x 18.0 cm I/O: USB (Universal Serial Bus) 3.0 (Front): 2* USB (Universal Serial Bus) 2.0 (Front): 2 Audio (Front): Yes Drive Bays: 3.5" or 2.5": 2 2.5": 1** Fan Configuration: Rear Panel: 1x 80 mm fan (optional)** Top Panel: 1x 120 mm fan (pre-installed) or 1x 240 mm radiator (optional) Compatibility: Mainboard: Mini-ITX Max. Length Graphics Cards: 31.5 cm Max. Height CPU Cooler: 15.0 cm Max. Length Power Supply: 14.5 cm Max. Height Radiator incl. Fan: 5.0 cm Power Supply: SFX/ATX (not compatible with modular ATX power supplies) Note: * internal 19-pin mainboard connector incl. USB (Universal Serial Bus) 2.0 plug ** Install either 2.5" drive or 80 mm fan in Rear Panel



...

The REX8 is an ATX case with four external installation bays for 5.25" drives. An additional four installation bays are available through the plastic multifunctional mounting frame. With this, both 3.5" & 2.5" devices can be used, making it suitable for almost all hard drives, SSDs, card readers, etc. In addition, this frame has the ability to attach a 120 mm fan, which in turn can cool a hard drive. The USB (Universal Serial Bus) & audio ports as well as the power button are easily accessible & found in the upper part of the front panel & on the top of the case. The case features a complete interior finish & offers quick-locking mechanisms for fast installation of drives & hard drives. The component cables can be arranged through the cable management system in a space saving manner & without hindering the inside air flow. The power supply is built on the bottom of the case. The value model offers an acrylic window on the side panel, two USB3.0 & four USB2.0 ports. The USB3.0 ports are internally attached to the mainboard via a 19-pin connector. This is complimented by the two preinstalled 120 mm LED fans in the front & rear of the case, at which the mount for the front fan is designed so that the fan can be mounted in the front of the case at various positions; thus allowing it to be placed wherever the hottest components are. The value model is available in black as well as white with a black mesh grill. In both cases the fans are illuminated in blue. An accessory set is included in delivery, while the instruction manual can be downloaded.

Features: ATX case 4x 5.25" drive bays (external) 4x 2.5"/3.5"/5.25"mounting bays (external) Top I/O: 2x USB3.0 (internal 19-pin mainboard connector) Front I/O: 4x USB2.0, 2x audio Acrylic side panel 7 slots for add-on cards Interior painting Mesh front panel Quick fasteners 3 openings for water cooling Cable management system Dimensions: 485 x 185 x 420 mm (L x W x H) Weight: ~6.5kg Fan configuration: Front panel: 1x 120 mm LED fan (pre-installed) Rear panel: 1x 120 mm LED fan (pre-installed) Color versions: Black case & blue illumination (fan & LEDs) White case & blue illumination (fan & LEDs) Compatibility: Max. length graphics card 29 cm Max. height CPU cooler 16 cm Max. length PSU 30 cm Accessories: 4x mounting frames for 2.5" or 3.5" HDDs/SSDs (pre-installed) 8x quick fasteners for ODDs (pre-installed) 1x 5.25" bezel with 3.5 opening 9x mainboard st&-offs 10x washers 4x screws for PSU attachment 48x fine thread screws 12x coarse thread screws Set with cable ties 1x speaker 1x download note

...

With the RHS100, we have expanded our Rush series to include a compact USB (Universal Serial Bus) headset with neck b&. The headset offers a comfortable fit & rich sound reproduction without a built-in sound card. To assist in the bass effect of the stereo speakers, the headset contains an additional vibrations effect. This effect, as well as the volume, is easily governed by a cable integrated controller. The RHS100 comes in a simple black design with subtle orange illuminating rings on both ear caps, & possesses a two meter long connection cable. For easy transport the headset simply folds together. Detailed instructions are included with the headset, & can be installed with standard system drivers.

Features: ¢ Stereo USB (Universal Serial Bus) headset with neck band & cable integrated volume control ¢ Adjustable vibration effect ¢ Open design ¢ Easy connection via USB (Universal Serial Bus) (no soundcard required) ¢ Pivoting microphone with mute & noise canceling function ¢ Suitable for: gaming, multimedia & language applications (e.g. Vo IP) ¢ Supported operating systems: Windows 2000, XP32 / XP64, Vista 32 / Vista 64 / Windows 7 (with Microsoft driver) ¢ Cable Length: ~ 2 m ± 0.15 m Specifications: Headphones: ¢ Speaker: ˜ 40 mm ¢ Sensitivity: 112 +/- 4 d B ¢ Impedance: 32 & Icirc;© ¢ Frequency Response: 20 Hz
- 20, 000 Hz ¢ Power Capability: 100 m W ¢ Plug Type: USB (Universal Serial Bus) plug (type A) Microphone: ¢ Microphone directivity: omni directional ¢ Sensitivity: -54 d B ± 3 d B ¢ Impedance: 2.2 K & Icirc;© ¢ Frequency Response: 100 Hz to 10, 000 Hz Delivery
Includes:: ¢ Stereo USB (Universal Serial Bus) headset "RHS100" ¢ Manual



...

With six buttons, optical sensor, maximum 4000 FPS & possible settings of 600, 1000, & up to 1600 DPI, you have the optimal conditions to measure up masterfully with other players. The ergonomic design of the SHARK Force, thanks to its special rubberized surface, offers maximum hold & fits perfectly in a h&. ...

Sharkoon SHARK ZONE C10 Mini-ITX Case SHARK ZONE: The new series from Sharkoon “ specifically designed for gamers! Familiar high Sharkoon quality with a well-known, attractive price-performance ratio. The black & yellow SHARK ZONE design enhances your gaming skills & sends a visual warning to your gaming rivals. Use at your own risk! Compact, Stylish & High Quality The all-black SHARK ZONE C10 Mini-ITX PC case offers maximum flexibility within the smallest of space. Thanks to its sophisticated layout, the high quality case offers more than enough room for all needed components. In addition, an optical drive can be installed. The stylish SHARK ZONE design is perfect for use as a powerful gaming PC. With its compact

Dimensions of only 37.0 x 22.5 x 18.0 cm (L x W x H), it is ideal for mobile & space-saving usage suitable for the next LAN party. Thanks to the clever arrangement of the controls & ports, the case can be used both horizontally & vertically. In addition, conventional ATX power supplies can be installed, in which the use of SFX power supplies provide even more space. A total of up to two expansion cards can be installed. Unmatched Ventilation Options A quiet 120 mm fan is pre-installed at the top &, if needed, an additional 120 mm fan can also be mounted. If no optical drive is installed, the top also has room for a 240 mm radiator for optional water cooling of the system. Ideal: All side panels offer generous ventilation openings & are all equipped with dust filters. A clear advantage for built-in graphics cards is the fresh air perfectly supplied via the side openings. In order to further optimize the ventilation, an 80 mm fan can be mounted in the rear. Modern Connectivity In the front, two USB (Universal Serial Bus) 3.0 ports provide easy access for connecting peripheral devices. In addition, the SHARK ZONE C10 has two audio ports for convenient use of a headset. Versatile Mounting Options Ideal for a gaming PC: The SHARK ZONE C10 offers room for the installation of a powerful dual-slot graphics card, with a maximum length of up to 31.5 cm. Furthermore, an optical drive in the 5.25" drive bay can be installed. When using the drive bay, a 3.5 inch hard drive or a 2.5" HDD/SSD can also be mounted. Without an optical drive, up to two 3.5 inch hard drives or two 2.5" HDD/SSD can be installed. An additional 2.5" HDD/SSD can be attached to the back of the case, instead of an 80 mm fan. CPU coolers with a maximum height of up to 15 cm can also be used. For easy mounting of a cooler, the case provides an appropriate cooler cutout. Practical thumbscrews simplify the opening as well as the closing of the case. Sharkoon SHARK ZONE A warning for some, an adventure for you. Specifications General: Form Factor: Mini-ITX Expansion Slots: 2 Interior Painting: yes Side Panel: Metal Weight: 3.0kg

Dimensions (L x W x H): 37.0 x 22.5 x 18.0 cm I/O: USB (Universal Serial Bus) 3.0 (Front): 2* Audio (Front): yes Drive Bays: 5.25" or 3.5" or 2.5": 1 3.5" or 2.5": 1 2.5": 1** Fan Configuration: Rear Panel: 1x 80 mm fan (optional)** Top Panel: 1x 120 mm fan (pre-installed) or 1x 240 mm radiator (optional) Compatibility: Mainboard: Mini-ITX Max. Length Graphics Cards: 31.5 cm Max. Height CPU Cooler: 15.0 cm Max. Length Power Supply: 14.5 cm Max. Height Radiator incl. Fan: 5.0 cm Power Supply: SFX/ATX (not compatible with modular ATX power supplies) Note: * internal 19-pin mainboard connector incl. USB (Universal Serial Bus) 2.0 plug ** Install either 2.5" drive or 80 mm fan in rear panel



...

The System Fan Series comes with 20 fans in 7 different sizes (look table below). From low up to very powerful fan speed, from minimal up to maximal air flow, from medium up to extremely silent noise levels
- in this series you will find a fan for every purpose. The fans are equipped with a robust slide bearing, which offers silent operation mode. They are perfectly suited for case, CPU or Northbridge cooling. For better distinction every fan belongs to one of the 4 categories Midrange, Power, Low Noise or Silent. The 3-pin connector enables fan speed monitoring by the main board.
...