NETGEAR’s low-cost, stackable, Fast Ethernet switches deliver maximum throughput & flexibility where you need it — to high-density workgroups at the edge of the network, or in the backbone of small networks. The Pro Safe FSM7226RS is a managed 24-port switch with auto-sensing 10/100 ports & two 10/100/1000 ports. This enables fiber connectivity through two hot-swappable small form-factor pluggable (SFP) Gigabit interfaces. The non-blocking design of the switches delivers simultaneous, full wire-speed, low-latency throughput to all ports. In addition, their 1U rack-mount form factor uses less rack space & provides a lower per-port cost than comparable Fast Ethernet switches. Static routing ensures reliable routing between VLANs & network segmentation where & when you need it, at no additional cost. Plus, two high speed (2.5 Gbps) dedicated stacking ports in the back provide extra bandwidth for stacking application. Features Powerful: In desktop switching environments, wire-speed performance with full Qo S control for all 10/100 interfaces is critical. The 2 Gigabit Ethernet combo interfaces provide unprecedented flexibility, whether you are stacking between switches, attaching bandwidth-thirsty file servers, or aggregating critical data to the core of your network Easy-to-use: Simplify & reduce IT staff workload & mean time to repair with intuitive, GUI-based device configuration, & an industry-standard comm&-line interface (CLI). 2.5 Gbps, high-speed stacking capabilities allow you to build a single IP manageable device with up to eight switches Outstanding Value: With their high-value price point, flexible design, & reduced maintenance requirements, NETGEAR’s Pro Safe 10/100 Layer 2+ Stackable Switch solutions yield a high return on investment, & are ideal for delivering highly reliable, converged voice, video, & data services over a single network infrastructure Work Space Friendly: The switch has a built-in thermal sensor to automatically speed up the fan to increase air flow in warm environments, & slow down the fan to reduce the noise when operating in an office environment ...

The Intelligent Edge M4100 series switches are NETGEAR fully managed switches for 100M/1G access layer in SMB, Small Enterprise & Campus networks. The M4100 series delivers the best combination of performance, security & convergence at a high-value price point—unlike competitive, entry-level “SMB” solutions. Redundant power supply options (RPS), full Po E+ external power supply options (EPS), Private VLANs, LLDP-MED & MVR take a scalable, future-proof approach to delivering network services for Wireless access points, IP phones & IP cameras infrastructures. NETGEAR Intelligent Edge M4100 series • Broad portfolio of access layer solutions, ranging from 8 ports Fast Ethernet to 50 ports Gigabit Ethernet •802.3af Po E & 802.3at Po E+ best fit, ranging from 66W to 1, 440W power budget per switch •IPv 4 routing in Layer 2+ package (L3 static routing) with IPv 4/IPv 6 ACLs & Qo S • High value L2/L3 tables with 16K MAC, 512 ARP/NDP, 9K jumbo frames, 1K VLANs, 64 static L3 routes • Redundant power supply option for uninterruptible operation (RPS) • External power supply option for Po E & Po E+ full-power applications (EPS) • Green Ethernet compliance for maximum power efficiency NETGEAR Intelligent Edge M4100 series software

Features: • Automatic multi-vendor Voice over IP prioritization based on SIP, H323 & SCCP protocol detection • Voice VLAN & LLDP-MED for automatic IP phones Qo S & VLAN configuration •IPv 4/IPv 6 Multicast filtering with IGMP & MLD snooping, Querier mode & MVR for simplified video deployments • Advanced classifier-based hardware implementation for L2 (MAC), L3 (IP) & L4 (UDP/TCP transport ports) inbound security & prioritization NETGEAR Intelligent Edge M4100 series link aggregation & channeling

Features: • Flexible Port-Channel/LAG (802.3ad) implementation for maximum compatibility, fault tolerance & load sharing with any type of Ethernet channeling • Including static (selectable hashing algorithms) or dynamic LAGs (LACP) NETGEAR Intelligent Edge M4100 series management

Features: •DHCP/ Boot P innovative auto-installation including firmware & configuration file upload automation • Industry standard SNMP, RMON, MIB, LLDP, AAA & s Flow implementation • Selectable serial RS232 DB9 & Mini-USB port for management console • Standard USB (Universal Serial Bus) port for local storage, configuration or image files • Dual firmware image & configuration file for updates with minimum service interruption • Industry standard command line interface (CLI) for IT admins used to other vendors commands • Fully functional Web console (GUI) for IT admins who prefer an easy to use graphical interface





...

The Netgear Intelligent Edge M4100 series consists of 12 fully managed switches, ranging from 8-port Fast Ethernet to 50-port Gigabit Ethernet. They are ideal for all organizations considering reliable, affordable & simple access layer switching with CLI, advanced scripting capabilities & Layer 3 routing. As a cost-effective component of converged voice, video & data networking solutions, NETGEAR M4100 series offers ideal, advanced features for a secure edge in commercial buildings & campus LAN environments. Features Layer 2+ with static routing Engineered for convergence High-value performance & IPv 6 ready High availability & Po E/ Po E+ full power capability Industry standard management Industry leading warranty ...

NETGEAR delivers wirespeed Gigabit performance & a full set of Layer 2 management features, as well as static routing with unsurpassed affordability. This next-generation, high-speed switch delivers maximum throughput where you need it
- to high-performance workgroups at the edge of the network, or as a backbone for Fast Ethernet switches & high-speed servers in demanding small networks. The non-blocking design offers full Gigabit throughput simultaneously to all 48 10/100/1000 ports to ensure reliable performance. Flexible fiber connectivity is enabled through four combination small form-factor pluggable (SFP) gigabit interfaces. Layer 2 management functionality delivers reliability, control, & availability. Static routing enables inter-VLAN routing & provides a faster network & more effective bandwidth management. Access control lists (L2-L4) provide robust security, while L2-L4 based Qo S provides enhanced traffic management capabilities. The cost-effective NETGEAR Pro Safe 24- & 48-port Gigabit L2 Managed Switch creates a more productive
- & futureproof
- network. With increasing bandwidth requirements from applications such as voice, video, database management, & other services that slow throughput & response time, you can unleash your network & enable maximum productivity with Gigabit Ethernet for today’s high-performance environments. Optimize bandwidth, security, & control with full Layer 2 management capabilities. Network administrators can use any combination of these features to ensure uptime, availability, bandwidth & throughput.


...

The NETGEAR Pro Safe 4100 series managed switches provide state-of-the-art, high-performance, IEEE-compliant network solutions. They include powerful management features that you can use to eliminate bottlenecks, boost performance, & increase productivity. ...

- Device Type: Switch
- 10 ports
- L3
- Managed
- Enclosure Type: Rack-mountable
- 1U
- Subtype: 10 Gigabit Ethernet





...

- Device Type: Switch
- 24 ports
- L3
- Managed
- stackable
- Enclosure Type: Rack-mountable
- 1U
- Subtype:






...

The NETGEAR M4300 Stackable Switch Series delivers L2/L3/L4 & IPv 4/IPv 6 cost-effective services for mid-enterprise edge with full Po E+ & SMB core deployments with unrivaled ease of use:10 Gigabit models can seamlessly stack with 1 Gigabit models within the series, enabling spine & leaf line-rate stacking topologies. Non-stop forwarding (NSF) virtual chassis architectures provide advanced High Availability (HA) with hitless failover across the stack. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set

Includes:: static, dynamic & policy-based routing
- as standard. Perfect for wireless access, unified communications & IP video, the NETGEAR M4300 Switch Series is also ready for the future, with Software-defined Network (SDN) & Open Flow 1.3 enabled for your network.


...

The NETGEAR M4300 Stackable Switch Series delivers L2/L3/L4 & IPv 4/IPv 6 cost-effective services for mid-enterprise edge with full Po E+ & SMB core deployments with unrivaled ease of use:10 Gigabit models can seamlessly stack with 1 Gigabit models within the series, enabling spine & leaf line-rate stacking topologies. Non-stop forwarding (NSF) virtual chassis architectures provide advanced High Availability (HA) with hitless failover across the stack. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set

Includes:: static, dynamic & policy-based routing – as standard. Perfect for wireless access, unified communications & IP video, the NETGEAR M4300 Switch Series is also ready for the future, with Software-defined Network (SDN) & Open Flow 1.3 enabled for your network.

...

The NETGEAR 10 Gigabit M7100 series consists of a fully managed, low-latency, line-rate 10G Copper " Base-T" switch solution; 24 ports 10 G Base-T (RJ45) that support Fast Ethernet, Gigabit Ethernet & 10 Gigabit speeds for server, storage & network progressive upgrade; 4 ports SFP+ that broaden 10 Gigabit connectivity for 1G/10G fiber uplinks & other DAC connections. M7100 series is ideal for all organizations considering reliable, affordable & simple 10 Gigabit Ethernet Top-of-Rack server access layer; & high-density, high-performance 10 Gb E backbone architectures. 24 ports copper 10 G Base-T / 4 ports SFP+ Backward compatible Gigabit & Fast Ethernet Line-rate for virtualization & convergence Innovative multi-vendor Auto-i SCSI optimization Dual redundant PSUs / Fan trays Designed for top-of-rack & distribution ...