Kingston's KHX21C11T3K2/8X is a kit of two 512M x 64-bit (4GB) DDR3-2133 CL11 SDRAM (Synchronous DRAM) 2 Rx 8 memory modules, based on sixteen 256M x 8-bit DDR3 FBGA components per module. Each module kit supports Intel XMP (Extreme Memory Profiles). Total kit capacity is 8GB. Each module kit has been tested to run at DDR3-2133 at a low latency timing of 11-12-11 at 1.6V. The SPDs are programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers & requires +1.5V. Technical Specifications Capacity: 8GB (2 x 4GB) Memory Type: DDR3 Speed: 2133 M Hz Pin configuration: 240-pin Cas Latency: CL11 Voltage: 1.6v Limited Lifetime Manufacturer Warranty ...

Unleash the Beast on your system. The vicious Hyper X Beast features a dynamic heatspreader to maximize thermal dissipation for increased reliability. Plus it looks really cool & enhances any system. It's Intel XMP ready so higher-performing frequencies, timings & voltages are just a few clicks away. The Beast gets along well with Intel Core processors & the AMD performance & gaming processors. Put the Beast in your corner & crush your opponents
- or just conquer your challenging workload.

Specification Capacity: 8GB (2 x 4GB) Type: DDR3 Speed: 2400 M Hz Form Factor: 240-pin DIMM Voltage: 1.65v Cas Latency: CL11 Warranty: Limited Lifetime Manufacturer Warranty


...

Now equipped with the heat sink, Hyper X T1 memory kit is Kingstons offering for the most exquisite overclocking memory product one could ask for. Featuring an heat sink construction, the Hyper X T1 is capable of challenging the limits to deliver a overclocking experience like never before. ...

Sometimes you need more than jaw-dropping, extreme performance that has all your friends running home, crying to their mommies. Sometimes you need that performance to extend for huge stretches of time — & reliably. H2O has a unique cooling option that dissipates heat, delivering incredible stability for the long haul. It’s perfect for extreme gamers & creative pros who max out their rig for extensive periods. It’s 100-percent tested & designed to keep your friends jealous for years to come. Features Capacity of 4GB Frequency speed — 2133 M Hz 1.5 operating voltage Features a unique, extreme cooling option that uses nickel-plated brass pipes & liquid for maximum heat dissipation Provides long-term stability at extreme speeds Compatible with Intel XMP auto-overclocking function DDR3 only Lifetime Manufacturer Warranty

Specification CL (IDD): 9 cycles Row Cycle Time (t R Cmin): 49.5ns (min.) Refresh to Active/ Refresh Command Time (t RFCmin): 160ns (min.) Row Active Time (t RASmin): 36ns (min.) Maximum Operating Power: 2.400 W* (per module) UL Rating: 94 V
- 0 Operating Temperature: 0oC to 85oC Storage Temperature: -55oC to +100oC


...

Kingstons KHX24C11T1K2/8X is a kit of two 512M x 64-bit (4GB) DDR3-2400 CL11 SDRAM (Synchronous DRAM), 2 Rx 8 memory modules, based on sixteen 256M x 8-bit FBGA components per module. Each module kit supports Intel XMP (Extreme Memory Profiles). Total kit capacity is 8GB. Each module kit has been tested to run at DDR3-2400 at a low latency timing of 11-13-13 at 1.65V. The SPDs are programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers. Features JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply VDDQ = 1.5V (1.425V ~ 1.575V) 667 M Hz f CK for 1333 Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 9, 8, 7, 6 Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock Programmable CAS Write Latency (CWL) = 7 (DDR3-1333) 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C Asynchronous Reset PCB: Height 2.401” (61.00mm) w/ heatsink, double sided component Specifications CL (IDD): 9 cycles Row Cycle Time (t R Cmin): 49.5ns (min.) Refresh to Active/ Refresh: 160ns (min.) Row Active Time (t RASmin): 36ns (min.) Maximum Operating Power: 2.400 W* (per module) UL Rating: 94 V
- 0 Operating Temperature: 0oC to 85oC Storage Temperature: -55oC to +100oC


...

Kingston's KHX18C11P1K2/16 is a kit of two 1G x 64-bit (8GB) DDR3-1866 CL11 SDRAM (Synchronous DRAM) 2 Rx 8 memory modules, based on sixteen 512M x 8-bit DDR3 FBGA components per module. Total kit capacity is 16GB. Each module kit has been tested to run at JEDEC DDR3-1866 at a low latency timing of 11-11-11 at 1.5V. Additional timing parameters are shown in the Pn P Timing Parameters section. Each 240-pin DIMM uses gold contact fingers & requires +1.5V. ...

The Kingston Hyper X Fan is specially designed to keep Kingston Hyper X memory running cool This unit consists of two 60mm fans to help cool off your RAM in extreme situations. It has two side panels that attach to the motherboard & are attached to the frame with 4 thumb screws. The Hyper X Fan is made from anodized aluminum & is the same familiar blue color as the Hyper X heatspreaders. When turned on, the fan blades are illuminated by eight small blue LEDs. Power use is minimal & noise is not an issue as the fan runs at a whisper-quiet 25 d BA The fan is available as a standalone or bundled with Kingston’s 6GB 2000- & 1800 M Hz triple-channel memory kits with the T1 heatspreaders for Intel Core i 7 systems. The Hyper X fan comes with a one-year warranty & free round the clock technical support. Specifications Fans = 2 x 60mm Noise = 28d BA max LEDs = 2 Blue ...

- Product Description: Kingston Hyper X Predator
- solid state drive
- 960 GB
- PCI Express 2.0 x 4
- Type: Solid state



...

- Product Description: Kingston Hyper X Predator
- solid state drive
- 960 GB
- PCI Express 2.0 x 4
- Type: Solid state



...

Kingstons Industrial micro SD card is designed & tested to withstand the most demanding environmental factors. With an operating temperature of
- 40°C to 85°C, it can operate normally even in extreme desert heat & sub- zero conditions. The card utilises industry-leading p SLC mode to provide top transfer speeds of up to 100MB/s*. It is rated up to 1920 TBW2 with 30K P/E cycles & has a built-in feature set specific to endurance, performance & industrial needs. Kingstons Industrial micro SD ships with a UHS-I SD adapter & is available in capacities from 8GB-64GB*** Durable in extreme temperatures High endurance UHS-I Speed Class U3, V30, A1 Industrial-grade built-in features
...