Gigabyte GA-Z77X-UP5 TH Socket 1155 HDMI DVI D-Sub 2/4/5.1/7.1-channel
ATX Motherboard

Product Description

Intel Z77 Chipset Supports 3rd Gen. Intel 22nm CPUs & 2nd Gen. Intel Core™ CPUs (LGA1155 socket) Dual Thunderbolt™ technology support GIGABYTE Ultra Durable™ 5 technology GIGABYTE 3-Way Digital Power with GIGABYTE 3D Power GIGABYTE 3D BIOS (Dual UEFI) 8 Phase VRM Design GIGABYTE Bluetooth 4.0 & Wi-Fi Card Onboard m SATA slot for m SATA SSDs PCI Express Gen 3.0 support SLI™ & Cross Fire X™ multi-GPU support Lucid Virtu™ Universal MVP GPU virtualization support Realtek ALC898 with High Quality 110d B SNR HD audio GIGABYTE On/ Off Charge with 3X USB (Universal Serial Bus) Power

Specification CPU Support for Intel Corei 7 processors/ Intel Cor i 5 processors/ Intel Core i 3 processors/ Intel Pentium processors/ Intel Celeron processors in the LGA1155 package L3 cache varies with CPU (Some Intel Coreprocessors require a graphic card, please refer "CPU support List" for more information.) Chipset Intel Z77 Express Chipset Memory 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed. Dual channel memory architecture Support for DDR3 2800 (OC)/1600/1333/1066 MHz memory modules Support for non-ECC memory modules Support for Extreme Memory Profile (XMP) memory modules (Please refer " Memory Support List" for more information.) Onboard Graphics Integrated Graphics Processor: 1 x D-Sub port 1 x DVI-D port, supporting a maximum resolution of 1920x 1200 * The DVI-D port does not support D-Sub connection by adapter. * Simultaneous output for DVI-D & the MDP2 Thunderbolt port is not supported. 1 x HDMI port, supporting a maximum resolution of 1920x 1200 Intel DSL3510L chip: 2 Thunderbolt ports (MDP1/MDP2) support for Mini-Display Port & Thunderbolt monitor (s), & supporting a maximum resolution of 2560x 1600. * When a monitor connected to the DVI-D port, the MDP2 Thunderbolt port can support Thunderbolt storage device (s) only. * Due to PC architecture I/O resources limitation, the amount of the Thunderbolt devices can be used is dependent on the quantity of PCI Express & PCI devices be installed. (Refer to Chapter 1-7, " Back Panel Connectors", & Chapter 2, " Peripherals Intel (R) Thunderbolt" for more information.) Audio Realtek ALC898 codec Support for X-Fi Xtreme Fidelity & EAX Advanced HD™ 5.0 technologies High Definition Audio 2/4/5.1/7.1-channel Support for S/PDIF In/ Out LAN 1 x Intel Gb E LAN chip (10/100/1000 Mbit) Wireless Communication module Wi-Fi 802.11 a/b/g/n, Supports 2.4/5 GHz Dual-Band Bluetooth 4.0, 3.0+HS, 2.1+EDR Expansion Slots 1 x PCI Express x 16 slot, running at x 16 (PCIEX16) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. 1 x PCI Express x 16 slot, running at x 8 (PCIEX8) * The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot will operate at up to x 8 mode. 1 x PCI Express x 16 slot, running at x 4 (PCIEX4) * The PCIEX4 slot is available only when an Intel 22nm (Ivy Bridge) CPU is installed. * The PCIEX4 slot shares bandwidth with the PCIEX8 & PCIEX16 slots. When the PCIEX4 slot is populated, the PCIEX16 slot will operate at up to x 8 mode & the PCIEX8 will operate at up to x 4 mode. (The PCIEX16, PCIEX8, & PCIEX4 slots conform to PCI Express 3.0 standard.) * Whether PCI Express 3.0 is supported depends on CPU & graphics card compatibility. 3 x PCI Express x 1 slots (All PCI Express x 1 slots conform to PCI Express 2.0 standard.) 1 x PCI slot Multi-Graphics Technology Support for AMD Cross Fire X™ / NVIDIA SLI technology Storage Interface Chipset: 2 x SATA 6 Gb/s connectors (SATA3 0/SATA3 1) supporting up to 2 SATA 6 Gb/s devices 4 x SATA 3 Gb/s connectors (SATA2 2~5) supporting up to 4 SATA 3 Gb/s devices 1 x m SATA connector * The SATA2 5 connector will become unavailable when the m SATA connector is installed with a solid state drive. Support for RAID 0, RAID 1, RAID 5, & RAID 10 * When a RAID set is built across the SATA 6 Gb/s & SATA 3 Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected. Marvell 88SE9172 chip: 1 x SATA 6 Gb/s connector (GSATA3 8) supporting up to 1 SATA 6 Gb/s device 1 x e SATA 6 Gb/s connector on the back panel supporting up to 1 SATA 6 Gb/s device Support for RAID 0 & RAID 1 USB Chipset: Up to 2 USB (Universal Serial Bus) 3.0/2.0 ports (available through the internal USB (Universal Serial Bus) headers) Up to 6 USB (Universal Serial Bus) 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB (Universal Serial Bus) headers) Chipset + 2 VIA USB (Universal Serial Bus) 3.0 Hubs: Up to 8 USB (Universal Serial Bus) 3.0/2.0 ports (4 ports on the back panel, 4 ports available through the internal USB (Universal Serial Bus) headers) * In Windows XP, the Intel USB (Universal Serial Bus) 3.0 ports & VIA USB (Universal Serial Bus) 3.0 HUB can support up to USB (Universal Serial Bus) 2.0 transfer speed. * Due to a Windows 7 limitation, please connect your USB (Universal Serial Bus) device (s) to the USB (Universal Serial Bus) 2.0/1.1 port (s) before the Intel USB (Universal Serial Bus) 3.0 controller driver is installed. IEEE 1394 VIA VT6308 chip: Up to 1 IEEE 1394a port (available through the internal IEEE 1394a header) Thunderbolt Intel DSL3510L chip: 2 Thunderbolt ports on the back panel Intel Certified Thunderbolt™ Device Internal I/O Connectors 1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 1 x PCIe power connector 3 x SATA 6 Gb/s connectors 4 x SATA 3 Gb/s connectors 1 x m SATA connector 1 x CPU fan header 4 x system fan headers 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 1 x S/PDIF In header 3 x USB (Universal Serial Bus) 3.0/2.0 headers 2 x USB (Universal Serial Bus) 2.0/1.1 headers 1 x IEEE 1394a port 1 x Clear CMOS jumper 1 x Trusted Platform Module (TPM) header 1 x power button 1 x reset button 1 x Clear CMOS button 1 x BIOS switch button Voltage Measurement Points Back Panel Connectors 1 x D-Sub port 1 x DVI-D port 1 x optical S/PDIF Out connector 1 x HDMI port 2 x Thunderbolt ports 1 x e SATA 6 Gb/s connector 4 x USB (Universal Serial Bus) 3.0/2.0 ports 2 x USB (Universal Serial Bus) 2.0/1.0 ports 1 x RJ-45 port 5 x audio jacks (Center/ Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In) I/O Controller i TE I/O Controller Chip H/W Monitoring System voltage detection CPU/ System temperature detection CPU/ System fan speed detection CPU overheating warning CPU/ System fan fail warning CPU/ System fan speed control * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. BIOS 2 x 64 Mbit flash Use of licensed AMI EFI BIOS Support for Dual BIOS™ Pn P 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a Unique Features Support for @BIOS Support for Q-Flash Support for Xpress Install Support for Xpress Recovery 2 Support for Easy Tune * Available functions in Easy Tune may differ by motherboard model. Support for e Xtreme Hard Drive (X.H.D) Support for Auto Green Support for ON/OFF Charge Support for Q-Share Support for 3D Power Support for EZ Setup Bundle Software Norton Internet Security (OEM version) Intel Rapid Start Technology Intel Smart Connect Technology Intel Smart Response Technology Lucid Logix Virtu MVP * Make sure the monitor cable has been connected to the integrated graphics port on the back panel. Operating System Support for Microsoft Windows 8/7/XP Form Factor ATX Form Factor; 30.5cm x 24.4cm