Corsair Vengeance LP 16GB (2x 8GB) DDR3L DRAM 1600 M Hz C9 Memory Kit Intel 6th generation Core ready DDR3L with solid performance at 1.35V Vengeance LP low profile DDR3L modules are designed to support Intel 6th generation Core (codenamed Skylake) Processor family. They’re built using highly screened ICs to ensure headroom for overclocking & reliable high-speed operation with low 1.35V power consumption. The heat spreaders have a reduced height of 1.03” (26.25mm) to work with extra-large CPU coolers, or in space constrained systems. 1.35V DDR3L standard It’s designed to fully support the Intel 6th generation Core processors (codenamed Skylake). Despite low 1.35V power consumption, Vengeance LP DDR3L modules still support the higher clock speeds necessary for high-performance computing. Low profile form factor Vengeance LP heat spreaders have a reduced height of 1.03” (26.25mm) to work with extra-large CPU coolers, in small form factor system builds, or any other space-constrained application where full-sized Vengeance or Vengeance Pro Series memory might not fit. Available in multiple heat spreader colors Match your motherboard’s color scheme, or just pick your favorite color – the choice is yours. & if you’re not feeling colorful… remember, black goes with everything. Supports XMP 1.3 Vengeance LP DDR3L memory kits are designed to provide overclocking headroom above rated speed, but the amount of headroom varies slightly from kit to kit. In the past, finding that overclocking threshold has been a trial-&-error process. With XMP, the process becomes automatic. Enable XMP & your system will select the maximum reliable overclocking settings for your DRAM, so you’ll get the best possible performance without worrying about stability issues. Backward compatible with Intel 3rd, 4th & 5th generation Core processors This kit also works with older motherboards with DDR3 slots. Older processors may not support the higher memory bus speeds & lower voltages allowed by 6th generation Core processors, but this kit will still work at slower speeds & at the 1.5V DDR3 standard. If in doubt, check your motherboard’s documentation. Technical Specifications Memory Size 16GB Kit (2 x 8GB) SPD Latency 11-11-11-28 SPD Speed 1600 M Hz SPD Voltage 1.35V / 1.5V Speed Rating PC3-12800 (1600 M Hz) Tested Latency 9-9-9-24 Tested Speed 1600 M Hz Tested Voltage 1.35V Fan Included No Heat Spreader Vengeance LP Memory Configuration Dual Channel Memory Series Vengeance Memory Type DDR3L Package Memory Format DIMM Package Memory Pin 240 Performance Profile XMP Warranty Limited Lifetime ...

Vengeance LP low profile DDR3L modules are designed to support Intel 6th generation Core (Skylake) Processor family. They’re built using highly screened ICs to ensure headroom for overclocking & reliable high-speed operation with low 1.35V power consumption. The heat spreaders have a reduced height of 1.03” (26.25mm) to work with extra-large CPU coolers, or in space constrained systems. 1.35V DDR3L standard It’s designed to fully support the Intel 6th generation Core processors (also known as “ Skylake”). Despite low 1.35V power consumption, Vengeance LP DDR3L modules still support the higher clock speeds necessary for high-performance computing. Low profile form factor Vengeance LP heat spreaders have a reduced height of 1.03” (26.25mm) to work with extra-large CPU coolers, in small form factor system builds, or any other space-constrained application where full-sized Vengeance or Vengeance Pro Series memory might not fit. Available in multiple heat spreader colors Match your motherboard’s color scheme, or just pick your favorite color – the choice is yours. & if you’re not feeling colorful… remember, black goes with everything. Supports XMP 1.3 Vengeance LP DDR3L memory kits are designed to provide overclocking headroom above rated speed, but the amount of headroom varies slightly from kit to kit. In the past, finding that overclocking threshold has been a trial-&-error process. With XMP, the process becomes automatic. Enable XMP & your system will select the maximum reliable overclocking settings for your DRAM, so you’ll get the best possible performance without worrying about stability issues. SPECIFICATION:
- Warranty Limited Lifetime
- Fan Included No
- Heat Spreader Vengeance LP
- Memory Configuration Dual Channel
- Memory Series Vengeance
- Memory Type DDR3L
- Package Memory Format DIMM
- Package Memory Pin 240
- Performance Profile XMP
- Memory Size 4GB Kit (1 x 4GB)
- SPD Latency 11-11-11-28
- SPD Speed 1600 Mhz
- SPD Voltage 1.35V
- Speed Rating PC3-12800 (1600 M Hz)
- Tested Latency 9-9-9-24
- Tested Speed 1600 Mhz
- Tested Voltage 1.35V
















...

Vengeance LP low profile DDR3L modules are designed to support Intel 6th generation Core (Skylake) Processor family. They’re built using highly screened ICs to ensure headroom for overclocking & reliable high-speed operation with low 1.35V power consumption. The heat spreaders have a reduced height of 1.03” (26.25mm) to work with extra-large CPU coolers, or in space constrained systems. 1.35V DDR3L standard It’s designed to fully support the Intel 6th generation Core processors (also known as “ Skylake”). Despite low 1.35V power consumption, Vengeance LP DDR3L modules still support the higher clock speeds necessary for high-performance computing. Low profile form factor Vengeance LP heat spreaders have a reduced height of 1.03” (26.25mm) to work with extra-large CPU coolers, in small form factor system builds, or any other space-constrained application where full-sized Vengeance or Vengeance Pro Series memory might not fit. Available in multiple heat spreader colors Match your motherboard’s color scheme, or just pick your favorite color – the choice is yours. & if you’re not feeling colorful… remember, black goes with everything. Supports XMP 1.3 Vengeance LP DDR3L memory kits are designed to provide overclocking headroom above rated speed, but the amount of headroom varies slightly from kit to kit. In the past, finding that overclocking threshold has been a trial-&-error process. With XMP, the process becomes automatic. Enable XMP & your system will select the maximum reliable overclocking settings for your DRAM, so you’ll get the best possible performance without worrying about stability issues. SPECIFICATION:
- Warranty Limited Lifetime
- Fan Included No
- Heat Spreader Vengeance LP
- Memory Configuration Dual Channel
- Memory Series Vengeance
- Memory Type DDR3L
- Package Memory Format DIMM
- Package Memory Pin 240
- Performance Profile XMP
- Memory Size 8GB Kit (1 x 8GB)
- SPD Latency 11-11-11-28
- SPD Speed 1600 Mhz
- SPD Voltage 1.35V
- Speed Rating PC3-12800 (1600 M Hz)
- Tested Latency 9-9-9-24
- Tested Speed 1600 Mhz
- Tested Voltage 1.35V
















...

Vengeance LP Performance Memory modules, 16GB (2x 8GB) DDR3 1600 M Hz CL9 Unbuffered DIMM Memory with XMP 1.3 for AMD, Intel Processor platforms, including 2nd & 3rd generation Intel Core i 7 & i 5 systems. Every Vengeance memory module provides users with outstanding performance & high quality. Vengeance memory modules are built using carefully selected DRAM to allow excellent overclocking performance & rock solid stability. Key Features 16GB (2x 8GB) DDR3 1600 M Hz with headroom to allow overclocking 9-9-9-24 latency Vengeance LP heat spreader for styling & performance Intel XMP 1.3 (Extreme Memory Profile) Support Also compatible with Intel & AMD dual channel DDR3 Platforms, including 2nd & 3rd generation Intel Core i 7 & i 5 systems Limited Lifetime Manufacturer Warranty

Specification Density: 16GB (2x 8GB Module) Speed: 1600 M Hz Timing: 9-9-9-24 Type: DDR3 XMP: version 1.3 Format: DIMM Pin Out: 240 Pin Voltage: 1.5V

...

Vengeance LP Performance Memory modules, 8GB (1x 8GB) DDR3 1600 M Hz CL9 Unbuffered DIMM Memory with XMP 1.3 for AMD, Intel Processor platforms. Every Vengeance memory module provides users with outstanding performance & high quality. Vengeance memory modules are built using carefully selected DRAM to allow excellent overclocking performance & rock solid stability. Compatible with AMD & Intel platforms. Key Features 8GB (1x 8GB) DDR3 1600 M Hz with headroom to allow overclocking 9-9-9-24 latency Vengeance LP heat spreader for styling & performance Intel XMP 1.3 (Extreme Memory Profile) Support Also compatible with Intel & AMD dual channel DDR3 Platforms Limited Lifetime manufacturer Warranty

Specification Density: 8GB (1x 8GB Module) Speed: 1600 M Hz Timing: 9-9-9-24 Type: DDR3 XMP: version 1.3 Format: DIMM Pin Out: 240 Pin Voltage: 1.5V

...

The Vengeance family: outstanding performance at an attractive price Low-profile heat spreaders Vengeance Low Profile heat spreaders have a reduced height of 1.03" (26.25mm). Theyre designed for high-performance systems with extra-large CPU coolers, small form factor system builds, or any other space-constrained application where standard Vengeance memory might not fit. 1.5V Vengeance Low Profile DDR3 memory is designed to meet the memory

Specification of the 2nd Generation Intel Core™ processor family. Great for overclocking Each Vengeance memory module is built from DRAM ICs specially selected for performance potential, to allow you to explore the limits of system overclocking. If youre new to overclocking, full support for Intel Extreme Memory Profile (Intel XMP) makes it easy. Add Vengeance to your XMP-compatible system & it can automatically select the maximum possible overclocking performance, quickly & easily. Make your system build budget go farther If youre a gamer, a system builder, or just an all-around performance enthusiast, you should demand performance & reliability, regardless of your budget. If you need dependable, overclockable memory at an attractive price, Vengeance is a great choice. Rigorous screening & exhaustive testing Speed is nothing without stability. That’s why Vengeance DDR3 memory kits, like all Corsair memory products, are carefully screened & tested to exacting standards. They’re backed up with a limited lifetime warranty that lets you buy with complete confidence.

Specification

Size: 16GB Kit (4 x 4GB) Performance Profile: XMP Fan Included: No Heat Spreader: Vengeance Memory Configuration: Dual Channel Memory Type: DDR3 Memory Pin: 240 Format: DIMM Tested Voltage: 1.5 SPD Voltage: 1.5 Speed Rating: PC3-15000 (1866 M Hz) SPD Speed: 1333 M Hz Tested Speed: 1866 Mhz Tested Latency: 9-10-9-27 SPD Latency: 9-9-9-24 Support: Lifetime Manufacturer Warranty





...

Corsair Vengeance Low Profile 32GB (4 x 8GB) Memory Kit PC3-12800 1600 M Hz DDR3 DIMM Unbuffered 1.5V Vengeance Low Profile DDR3 memory is designed to meet the memory

Specification of the 2nd Generation Intel Core processor family. The Special Edition Arctic White Vengeance Low Profile memory modules operate at the ultra-low voltage of 1.35V, for ultra-quiet systems & other low-voltage applications. Vengeance Low Profile heat spreaders have a reduced height of 1.03 (26.25mm). They're designed for high-performance systems with extra-large CPU coolers, small form factor system builds, or any other space-constrained application where standard Vengeance memory might not fit. Each Vengeance memory module is built from DRAM ICs specially selected for performance potential, to allow you to explore the limits of system overclocking.

...

Corsair Vengeance
- DDR3
- 8 GB
- DIMM 240-pin
- 1600 MHz / PC3-12800
- CL10
- 1.5 V
- unbuffered
- non-ECC







...

Vengeance LP Performance Memory modules, 8GB (2x 4GB) DDR3 1866 M Hz CL9 Unbuffered DIMM Memory with XMP 1.3for AMD, Intel Processor platforms, including 2nd & 3rd generation Intel Core i 7 & i 5 systems. Every Vengeance memory module provides users with outstanding performance & high quality. Vengeance memory modules are built using carefully selected DRAM to allow excellent overclocking performance & rock solid stability

Specification Capacity: 8GB (2 x 4GB) Technology: DDR3 SDRAM Memory Voltage: 1.5 V Memory Speed: 1866 MHz Memory Standard: DDR3-1866/PC3-15000 Error Checking: Non-ECC Signal Processing: Unbuffered Plating: Gold Plated CAS Latency: CL9

Features: Heatsink Number of Pins: 240-pin Support: Limited Lifetime Manufacturer Warranty



...

Low-profile heat spreaders Vengeance Low Profile heat spreaders have a reduced height of 1.03" (26.25mm). Theyre designed for high-performance systems with extra-large CPU coolers, small form factor system builds, or any other space-constrained application where standard Vengeance memory might not fit. Great for overclocking Each Vengeance memory module is built from DRAM ICs specially selected for performance potential, to allow you to explore the limits of system overclocking. If youre new to overclocking, full support for Intel Extreme Memory Profile (Intel XMP) makes it easy. Add Vengeance to your XMP-compatible system & it can automatically select the maximum possible overclocking performance, quickly & easily. Make your system build budget go farther If youre a gamer, a system builder, or just an all-around performance enthusiast, you should demand performance & reliability, regardless of your budget. If you need dependable, overclockable memory at an attractive price, Vengeance is a great choice. Rigorous screening & exhaustive testing Speed is nothing without stability. That’s why Vengeance DDR3 memory kits, like all Corsair memory products, are carefully screened & tested to exacting standards. They’re backed up with a limited lifetime warranty that lets you buy with complete confidence.

Specification Capacity: 8GB (2 x 4GB Kit) Performance Profile: XMP Fan Included: No Heat Spreader: Vengeance Memory Configuration: Dual Channel Memory Type: DDR3 Memory Pin: 240 Memory Format: DIMM Tested Voltage: 1.5 SPD Voltage: 1.5 Speed Rating: PC3-17066 (2133 M Hz) SPD Speed: 1333 M Hz Tested Speed: 2133 Mhz Tested Latency: 11-11-11-27 SPD Latency: 9-9-9-24 Warranty: Limited Lifetime Manufacturer Warranty

...