The ATEN Professional Online UPS is an exceptional & innovative electrical apparatus that provides emergency power to a load when the input power source, or the mains, fails. The basic technology of an online UPS is the same as in a standby or line-interactive UPS, however, the ATEN Professional Online UPS provides a much greater current of AC-to-DC battery-charger/rectifier where the rectifier & inverter are designed to run continuously with enhanced cooling systems. In all our years of working with computers, we’ve found the vast majority of hardware failures can be directly attributed to the stress hardware components experience during the shut-down & startup process, especially if power surges or blackouts are involved. With severe weather, the aging electrical grid, & hazards lurk inside your own walls, your equipment is under constant attack from power problems. Even a brief loss of power, sags, or a momentary surge can ruin your equipment & destroy irreplaceable data. Desktop computers don’t have batteries built-in like laptops do. If you are working on a desktop during a power outage, the system would come to an immediate halt. Not only would you lose your work, but the process imposes unnecessary stress on your machine. If a UPS is present & a power loss occurs, the batteries in the UPS would keep the power steady & unchanged. The ATEN Professional Online UPS adjusts incoming AC power, provides battery backup to pass through most outages, & saves open files automatically. When power is restored, the UPS begins recharging its batteries. The Online UPS unit continuously filters wall power through the battery system. Since the attached electronics run completely off the battery (that are always topped off by the external power supply), there is never a single millisecond of power interruption when there is power loss or voltage regulation issues. The Online UPS unit thus acts as an electronic firewall between your devices & the outside world by stabilizing all the electricity to which your devices are exposed. The UPS has one USB (Universal Serial Bus) port & one Serial port that allow connection & communication between the UPS & the connected computer. Power management software installed on the connected computer (s) gives IT professionals the tools they need to easily monitor & manage their backup power. This advanced software allows users to access vital UPS battery conditions, load levels, & runtime information as well as provide unattended shut down of network computers & virtual machines connected to a battery backup during a power event. The ATEN Professional Online UPS offers you a different way to access detailed UPS settings & information with an LCD screen. The illuminated LCD screen displays input voltage, battery capacity, etc. &

Includes:: a three-button configuration interface & audible alarms for different modes of operation. True double-conversion – Output power factor is 1 (maxium), which means all of the power supplied is being used for productive work & makes work the most efficient. Programmable power management outlets – Users can easily & independently control load segments. During power failure, this feature enables users to extend battery time to mission-critical devices by shutting down noncritical devices. Emergency Power Off function (EPO) – EPO connector at rear panel allows emergency UPS Power Off from a remote location. SNMP + USB (Universal Serial Bus) + RS-232 multiple communications – Allows either USB (Universal Serial Bus) or RS-232 communication ports to work with SNMP interface simultaneously.

...

The Aten’s PE0110S, a 10-outlet, 1U rack mount power distribution unit (PDU), provides IEC & NEMA output. It distributes power to 10 receptacles from a single plug with unfiltered electrical pass-through. The PE0110S also provides surge protection, prevents damage to your equipment from power surges & spikes. The integrated surge protector

Includes:: a LED indicator, letting you know the status of your equipment. Aluminum housing helps prolong the units life with rugged casing made from impact-resistant material for maximum durability. Basic 1U PDU can be easily mounted to wall, wooden furniture, or work bench.

...

The PE0112 series Basic PDU contains 12 AC outlets & is available in IEC or NEMA socket configurations. The PE0112 series Basic PDU features a space-saving 1U design that allows it to be mounted vertically on the outside of a rack, resulting in a more effi cient use of space in the server room, while providing 12 AC outlets. ...

The Aten’s PE0210S, a 10-outlet, 1U rack mount power distribution unit (PDU), provides IEC & NEMA output. It distributes power to 10 receptacles from a single plug with unfiltered electrical pass-through. The PE0210S also provides surge protection, prevents damage to your equipment from power surges & spikes. The integrated surge protector

Includes:: a LED indicator, letting you know the status of your equipment. Aluminum housing helps prolong the units life with rugged casing made from impact-resistant material for maximum durability. Basic 1U PDU can be easily mounted to wall, wooden furniture, or work bench.

...

The PE0212 series Basic PDU contains 12 AC outlets & is available in IEC or NEMA socket configurations. The PE0212 series Basic PDU features a space-saving 1U design that allows it to be mounted vertically on the outside of a rack, resulting in a more effi cient use of space in the server room, while providing 12 AC outlets. ...

Power Distribution
- Space saving 1U rack mount design with rear mounting
- IEC or NEMA outlet models
- 3 digit 7-segment


...

8 outlets • 15A (UL derated 12A) / 10A • Outlet Power Measurement The PE8108 eco PDU is intelligent PDUs that contains 8 AC outlets & is available in various IEC or NEMA socket configurations. It provides secure, centralized, intelligent, power management (power on, off, cycle) of data center IT equipment (servers, storage systems, KVM switches, network devices, serial data devices, etc.), as well as the ability to monitor the center's health environment via sensors*. The eco PDUs offer remote power control combined with real-time power measurement
- allowing you to control & monitor the power status of devices attached to the PDUs at outlet level from practically any location via a TCP/IP connection. The eco PDU supports any 3rd party v 3 SNMP Manager Software & The eco Sensors (Energy Management Software). The eco Sensors provides you with an easy method for managing multiple devices, offering an intuitive & user-friendly Graphical User Interface that means that you can configure a PDU device & monitor power status of the equipment connected to it. With the eco Sensors, the Sensor-enabled eco PDU also offers comprehensive power analysis reports which can separate by departments & locations, providing precise measurements of current, voltage, power & watt-hour in a real-time display. With its advanced security features & ease of operation, the eco PDU is the most convenient, most reliable, & most cost effective way to remotely manage power access for multiple computer installations & allocate power resources in the most efficient way possible. * Sensors are optional accessories. A sensor-enabled installation is required to generate a more complete energy-efficient data & chart. Higher sensor installation density is helpful to generate more accurate data. Remote power outlet control (On, Off, Power Cycle) by individual outlets Real-time current, voltage, & k WH displayed in a browsed-based UI for monitoring at the outlet level (PE8108 / PE8208) Network Interfaces: TCP/IP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP, NTP, DNS, 10 Base-T/100 Base-TX, auto sense, Ping, Telnet Power-on sequencing – users can set the power on sequence & delay time for each port to allow equipment to be turned on in the proper order
...

Universal Serial Bus (USB) port technology has emerged in response to the proliferation of external peripheral devices (scanners, digital cameras, removable drives, etc.), that are increasingly being connected to the latest generation of PCs. USB (Universal Serial Bus) behaves in a similar fashion to conventional bus ports (i.e., serial, parallel, PS/2), but since it does not require any IRQs, more devices can be attached to the system, & the problem of an IRQ conflict is eliminated. The UC100KMA PS/2 to USB (Universal Serial Bus) Keyboard & Mouse interface converter (Adapter) provides the means for PS/2 type keyboards & mice to connect to a PC, notebook, laptop, or handheld computing device that supports the USB (Universal Serial Bus)

Specification via the USB (Universal Serial Bus) bus instead of using the older, conventional bus technology. An advantage of this for notebooks, for example, is that now an external mouse & full size keyboard can be connected at the same time without causing conflicts. The UC100KMA has two standard 6-pin mini DIN female connectors for a PS/2 keyboard & PS/2 mouse to plug into & has an attached 30cm USB (Universal Serial Bus) cable with a type-A plug for connecting to the PCs USB (Universal Serial Bus) port, or to a USB (Universal Serial Bus) hub. For further convenience
- especially to users of notebooks, laptops, & handheld devices
- the UC100KMA adapter derives its operating power from the Universal Serial Bus itself, so no bulky external power supply is needed. & because it is a USB (Universal Serial Bus)-compliant device, the G-UC100KMA supports energy-saving suspend & resume operations.



...

The KA7120 PS/2 KVM Adapter Cable connects the KVM switch to the video & PS/2 mouse & keyboard ports of the target computer. With its small form factor & light weight design, it represents the next generation of PS/2 KVM Adapter Cables
- offering superior signal compensation & delay skew techniques for greatly enhanced video quality. Auto Signal Compensation (ASC), no DIP switch setting needed for the different distances Keyboard & mouse emulation
- keeps your server functioning smoothly when it is disconnected from the switch's KVM port or relocated to different KVM port Lifetime firmware upgrades Superior video quality
- supports resolution of up to 1600 x 1200 within the distance of up to 50m Built in ASIC for greater reliability & compatibility CPU module designed with automatic conversion to allow for flexible interface combinations (PS/2, USB) to control all computer types (PC) Compact size


...

The CE370 a PS/2 based KVM Extender with automatic signal compensation & RS-232 serial functionality allows access to a computer system from a remote PS/2 console (PS/2 keyboard, monitor, & PS/2 mouse). Because it allows access to a computer system from a remote console, the CE370 is perfect for use in any type of installation where you need to place the console where it is conveniently accessible, but you want the system equipment to reside in a safe location
- away from the dust & dirt of the factory floor, or the harsh environmental influence of a construction site, for example. This allows users to deploy system equipment over large distances. The CE370 supports RGB delay tuner to manually synchronize the RGB signals. This allows users to deploy system equipment over large distances. The CE370's line synchronizing function corrects color phase & timing errors that occur over long distance transmissions. It also enables you to manually tune the R/G/B signal settings. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.
...