The Rack Sensor Pod 150

Includes:: six universal sensor ports for monitoring input from APC environmental sensors

...

The Net Botz 300 offers the best value for security & environmental monitoring over the network. An integrated camera allows ...

Convenience Eyebolt support integrated into enclosure frame Integrated eyebolt holes at the top of the enclosure frame allow the enclosure to be lifted for movement & enclosure placement using eyebolt lifting mechanisms. Refer to enclosure user documentation for detailed specifications on eyebolt requirements & enclosure weight limits. Simple Selection No need to spend hours choosing from & compiling dozens of part numbers to create a single enclosure. Schneider Electric has made it easy by handling the details & providing complete enclosures with single part numbers. Easily removable cable access roof Roof can be removed with simple pull-pin hinges for access during equipment installation or even with cabling already in place & routed through the cable openings. Once removed the roof is reversible to reposition the larger cable openings for power distribution plugs & connectors. Cable access openings with pre-installed brushes Large cable access slots in the roof provides access for overhead cable egress. The bottom design allows for unobstructed cable access through a raised floor. Roof

Includes:: openings with brush strips pre-installed in locations biased towards the front of the enclosure to allow for data cable passthrough & provisions for air containment. Enclosure adjustment tools & hardware provided All enclosures are provided standard with hardware bag that

Includes:: hardware for mounting IT equipment & tools for simple enclosure adjustment. Equipment mounting rails integrate with patch cabling systems Equipment mounting rails include zero U mounting holes beside the EIA 19" mounting space that allow the installation of Data Distribution Cable (DDC) patch systems without taking up any critical equipment U-space. AV & Networking enclosure designs do not include hole locations for integration of DDC cabling. Other 1U, 2U, & rear enclosure zero U options are available for use with these enclosures. Perforated front door with curved profile Perforated front & rear doors provide ample ventilation for servers & networking equipment. Front door perforated area is optimized with a curved profile to provide greater surface area & allowance of more perforation coverage & higher perforation rating. Half-height side panels & option with brush strips for pass-through Half-height quick release side panels reduce size & weight for easy handling & access to equipment. Side panels are lockable utilizing a single key with the doors. Now available are side panel options integrated with pass-through holes & brush strips for routing cabling to adjacent racks in a row while still maintaining proper airfow. Quick release doors Front door can be moved to the opposite side or interchanged with rear doors. Doors are easily removed with simple lift-off design. Compatibility Schneider Electric Rack Systems Compatible Compatible with a variety of Schneider Electric rack accessory products to provide the ability to create a complete rack system. Configure rack solutions using industry leading Schneider Electric Design Portal
- Small IT Solution Designer configurator complete with verification of product compatibility & useful 3rd party equipment catalog to aid in visualizing your ideal rack solution. Integrated with Infra Struxure products Schneider Electric cooling, power distribution, & cable management products work seamlessly with IT enclosures to provide a complete infrastructure support system. Vendor-neutral EIA-310 19in Rack Mounting Compatibility Guaranteed Vendor-neutral mounting for guaranteed compatibility with all EIA-310 compliant 19" equipment. The " Fits Like a Glove" money back guarantee provides peace of mind that all of your EIA-310-E compliant rack-mount equipment will physically fit in a Net Shelter. Optimized for high capacity cable management systems Net Shelter SX enclosures are optimized for use with high capacity cable management systems that attach to equipment mounting rails inside enclosures aligning with equipment mounting u-spaces & provide channels for routing & managing cabling. Safety Integrated electrical grounding The roof, side panels & front & rear doors are grounded to the frame of the enclosure. Eight additional electrical grounding inserts are located on the frame for external grounding. Designed for enhanced structural stability A proven frame design, heavy-gauge mounting rails, & heavy-duty casters provide for 3000 lb (1364 kg) static (levelling feet) & 2250 lb (1023 kg) dynamic (castor) load ratings. Enclosures have been tested & approved to be combined with proper bolt down accessories to meet various seismic requirements. Check apc.com for product documentation for specific requirements. Agility Adjustable mounting rails with captive hardware & rapid alignment The vertical mounting rails can be adjusted in 1/4 in (6.4 mm) increments covering virtually any mounting requirement for IT equipment. Easy alignment feature integrated into the enclosure mounting rail & side brace for quick alignment verification without the use of tools to verify alignment. U positions are numbered front & back for rapid installation of equipment. Pre-installed full-enclosure height rear accessory channels Integrated & adjustable rear accessory channel provides zero U mounting locations for toolless accessories. Each channel has two mounting bays to support a combination of up to four accessories such as PDUs & vertical cable organizers. 1070mm (42in), 825mm (32 in), & deep enclosures & networking enclosures include two channels. 1200mm (48in) deep enclosures include four channels. Channels are pre-installed at the factory in the rear of the enclosure but can be moved to other locations of the enclosure along the side brace to resituate cable management where it is needed most. Split rear doors Split rear doors improve access & serviceability to rear of rack mounted equipment. The split rear doors help to maximize floor space. Only 11 inches (279 mm) of clearance is required behind the enclosures to allow for door swing. Enclosure assemble-to-order (ATO) options capable The Enclosure ATO (Assemble-to-Order) options provide a level of customization for enclosure customers beyond the standard enclosure models. This customization is limited to the assembly of the enclosure itself & does not include additional enclosure mounted components. For example, the enclosure can be assembled without sides, doors, or without sides & doors. Check apc.com for enclosure size options & availability. Special packaging options for shipping rack with equipment pre-racked Enclosures with shock packaging are standard enclosures with provisions in the packaging design & enclosure assembly for shipping the enclosures with equipment mounted inside. Extensive industry experience with the leading IT manufacturers & most recently certified with Cisco for pre-racking & shipping Cisco Unified Computing Systems (UCS). Check apc.com for enclosure size options & availability. Integrated joining hardware with multiple width enclosure alignment Enclosures include pre-installed joining hardware to join enclosures in a row & provide additional stability to the enclosure. The pre-installed joining hardware

Includes:: holes for joining to an adjacent enclosure at 600mm centers or 24in centers depending upon the floor layout. Low-profile castors & adjustable leveling feet from underneath or above Enclosures are shipped standard with both leveling feet & castors. Leveling feet can be quickly adjusted through the use of a screwdriver or drill, eliminating the need to reach underneath with a wrench.






...

Net Shelter SX enclosures are optimized for use with high capacity cable management systems that attach to equipment mounting rails inside enclosures aligning with equipment mounting u-spaces & provide channels for routing & managing cabling. Eyebolt support integrated into enclosure frame Integrated eyebolt holes at the top of the enclosure frame allow the enclosure to be lifted for movement & enclosure placement using eyebolt lifting mechanisms. Refer to enclosure user documentation for detailed specifications on eyebolt requirements & enclosure weight limits. Easily removable cable access roof Roof can be removed with simple pull-pin hinges for access during equipment installation or even with cabling already in place & routed through the cable openings. Once removed the roof is reversible to reposition the larger cable openings for power distribution plugs & connectors. Quick release doors Front door can be moved to the opposite side or interchanged with rear doors. Doors are easily removed with simple lift-off design. Perforated front door with curved profile Perforated front & rear doors provide ample ventilation for servers & networking equipment. Front door perforated area is optimized with a curved profile to provide greater surface area & allowance of more perforation coverage & higher perforation rating. Simple selection No need to spend hours choosing from & compiling dozens of part numbers to create a single enclosure. Schneider Electric has made it easy by handling the details & providing complete enclosures with single part numbers. Enclosure adjustment tools & hardware provided All enclosures are provided standard with hardware bag that

Includes:: hardware for mounting IT equipment & tools for simple enclosure adjustment. Integrated electrical grounding The roof, side panels & front & rear doors are grounded to the frame of the enclosure. Eight additional electrical grounding inserts are located on the frame for external grounding.

...

American Power Conversion (APC) is a global leader in the designing, manufacturing & marketing of power protection equipment, including surge suppressors, uninterruptible power supplies (UPS), power conditioning equipment & related software for computer & computer-related equipment. To keep its products well-supplied APC offers a wide range of accessories. ...

This 12 U vertical mounting rail kit bolts into pre-existing holes in the Netshelter CX mini to convert the basic enclosure into a 12 U rack enclosure with a fixed rack depth of 600 mm (26"). ...

This 2-component fixed rail kit enables a wide variety of equipment to be rack mounted by providing 2 horizontal ledges on which to slide & place equipment. ...

Net Shelter CX 38U 750 mm Wide x 1130 mm Deep Enclosure Net Shelter CX is a specialized enclosure with integrated cooling, noise dampening, & power distribution for server & network applications in office environments. Protect IT equipment from unwanted access. Provides customers with easy accessibility to equipment. ...

American Power Conversion (APC) is a global leader in the designing, manufacturing & marketing of power protection equipment, including surge suppressors, uninterruptible power supplies (UPS), power conditioning equipment & related software for computer & computer-related equipment. To keep its products well-supplied APC offers a wide range of accessories. This kit contains 32 sets of caged nuts, a nylon cup washer & slot/ Phillips screws. ...

Universal IT enclosure for low to medium density server & networking applications. Compact width to optimize data center space. 42U height to easily roll through doorways with essential features & functionality to meet the fundamental requirements of rack-mount IT equipment. ...