Allied Telesis x 230-28GP 24 Ports Manageable Layer 3 Switch
- 3 Layer Supported
- Modular
- Optical Fiber, Twisted Pair
-



...

Allied Telesis x 320-11GPT 8 Ports Manageable Layer 3 Switch
- 3 Layer Supported
- Modular
- 98 W Po E Budget
- Optical



...

Allied Telesis x 510 GPX Series stackable Gigabit switches power the edge in the network more efficiently than any others. The x 510-52GPX stackable Gigabit edge switch features 48 x 10/100/1000T Po E+ ports & 4 x 10G/1G SFP+ uplink ports. It

Includes:: two internal power supplies for high reliability, as well as VCStack™, allowing devices to be stacked to create highly resilient solutions that can be distributed over long distances. The AT-x 510-52GPX delivers up to 30 Watts per port (Po E+), perfect for supporting standard as well as Pan/ Tilt/ Zoom video surveillance & security cameras, wireless access points, IP phones, RFID readers, automatic doors & other Po E-powered devices. This Po E option eliminates the need for power rewiring & minimizes the clutter of power supplies & adapters in awkward places. The x 510-52GPX is designed for the edge of enterprises, retail, government, universities & medical campuses.

...

Allied Telesis X530L-52GTX 48 Ports Manageable Layer 3 Switch
- 3 Layer Supported
- Modular
- Twisted Pair, Optical Fiber
-



...

Allied Telesis x 950-28XSQ Manageable Layer 3 Switch
- 3 Layer Supported
- Modular
- Optical Fiber
- 1U High
- Rack-mountable




...

The Allied Telesis AT-FS700FC series switches provide powerful 10/100 switching solutions with 100FX backbone connectivity to desktop & small network environments. Full auto-negotiating 10/100 ports automatically detect speed & duplex modes of attached devices & allow the switch to automatically configure for the best possible performance. The AT-FS717FC is rackmountable. Each AT-FS700FC series switch also provides an additional fiber optic interface port to allow deployment up to 2km from other network connections. The AT-FS700FC series switches are fully auto-configuring requiring minimal or no setup by the user. The auto-sensing ports allow seamless & simple connectivity between existing 10 Mbps Ethernet & 100 Mbps Fast Ethernet UTP devices & all units can be installed in minutes. Front panel LEDs allow users to monitor the switch status providing simple "at a glance" management. Allied Telesis is the worldwide leader in unmanaged Ethernet devices & offers proven reliability, industry recognized quality & unique support. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Allied Telesis simply connects the IP world with affordable, highly reliable, end-to-end networking solutions. The companys broad line of networking products builds systems that meet todays demand for efficient, effective connectivity
- in small networks, across the enterprise, & over remote links. Allied Telesis makes the most challenging networks designs a reality, with a variety of products for network systems that optimize for any distance, speed, security or legacy integration priority. &, as always, Allied Telesis commitment to quality, efficiency, security, ease of use & low cost of ownership is backed by the industrys best warranties & technical support.
...

The AT-FS708LE is an ideal fit for small business networks. The robust metal chassis can be mounted to the wall or desktop. The AT-FS708LE is fully auto-configuring, which means minimal set up for you. Auto-sensing ports connect existing 10 Mbps Ethernet & 100 Mbps Fast Ethernet UTP devices seamlessly. Auto MDI/MDIX on all ports easily connect other hubs & switches. The user friendly front panel shows ongoing switch status & simplifies troubleshooting. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Allied Telesis'' AT-MC1004 Gigabit Ethernet media converters extend the reach of Gigabit Ethernet networks through the use of multi-mode & single-mode fiber-optic cabling. By converting 1000T copper connections to 1000SX or LX connections, these Gigabit Ethernet media converters can extend segment lengths up to 10km. Although the provisioning of Gigabit Ethernet connections is becoming relatively inexpensive, thanks in part to the availability of lower-cost copper Gigabit network adapters, the distance limitations of copper cabling make fiber segments a necessity in most networks. Small, comparatively inexpensive copper to fiber Gigabit Ethernet media converters present a simple & very cost-effective way of connecting Gigabit Ethernet LANs over extended distances. To aid installation these media converters support an auto-sense MDI/MDIX port, allowing the media converter to connect directly with either a switch, PC adapter, or other Gigabit Ethernet device, using a standard cable. The AT-MC1004 Gigabit Ethernet media converters are powered by an external power supply for use in standalone applications. Where multiple media converters are used, up to 12 standalone devices can be inserted into the low-cost AT-MCR12 rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rackmount chassis. ...

The Allied Telesis range of Fast Ethernet Media converters provides a complete series of conversion devices, allowing users to extend the size of UTP & multi-mode fiber networks with the use of single-mode fiber cabling. Supporting SC-connected single-mode fiber, these converters can be used to extend networks up to a distance of 2km. All these media converters feature an internal MDI/MDIX switch, allowing the converter to be connected to PC, hub or switch with a simple UTP cable. The media converters also allow the installer to test the integrity of fiber connection, by forcing the converters to communicate over the fiber cable. This Link Test feature allows installers to check for cable faults without the need for expensive fiber optic test equipment. ...