This proven premixed formula is a step ahead in EKWB product research & offer. Coolant is suitable for mixed copper, brass, steel, nickel & aluminum cooling loops, providing best value/performance ratio. Ekoolant is the result of latest vigorous experiments on performance & influence, & contains best components which offer optimal protection from corrosion, yet allowing maximum cooling performance. Its pureness, proper viscousness & low chemical content makes it an excellent & best suitable coolant any PC watercooling system. The highly automated & advanced bottle filling equipment guarantees you exact volume according to the European Directive 76/211/EEC. The printed numbers on top of the bottle allows each series to be tracked & show when the coolant was fllled. Characteristics:
- low electrical conductivity
- extra pure distilled/deionized water of electrical conductivity of 1µS/cm used for the coolant
-

Includes:: additives against algae & corrosion
- high quality concentrated pigments lead to intense, vivid & saturated colors
- not aggressive towards acrylic, acetal, rubber or other gasket materials
- ecologically friendly (85% degredable in 30 days)
- ROHS compliant
- 2 year shelf time Techical data:
-
Colour: Blood RED
- content: 1000 m L Please note: * As all other non-conductive liquids on the market, this coolant will become conductive & loose its characteristics if it comes in contact with other liquids or dust. It hence is advisable to keep your system free of dust & other particles. * EKWB is not to be held responsible for any damages to hardware. User agrees utlizing at own risk. * As this coolant contains dye it cannot be guaranteed that it will not stain e.g. clothing or other materials when in contact. Please also note that dye fades with time & the intensity of the colour may decrease. That is why EKWB recommends storing this coolant away from direct sunlight. * EKWB recommend proper flushing of all previously used watercooling components in order to minimize the risk of discolouring of EKoolant. * Ekoolant already contains an anti-algae additives. Therefore we do not recommend adding of any extra anti-algae or anti-microbial agents. The addition of any other substances may result in a chemical reaction, which can cause dye breakdown & clogging which can harm your system. *EKWB recommends changing liquid at least once a year or sooner.












...

This proven premixed formula is a step ahead in EKWB product research & offer. Coolant is suitable for mixed copper, brass, steel, nickel & aluminum cooling loops, providing best value/performance ratio. Ekoolant is the result of latest vigorous experiments on performance & influence, & contains best components which offer optimal protection from corrosion, yet allowing maximum cooling performance. Its pureness, proper viscousness & low chemical content makes it an excellent & best suitable coolant any PC watercooling system. The highly automated & advanced bottle filling equipment guarantees you exact volume according to the European Directive 76/211/EEC. The printed numbers on top of the bottle allows each series to be tracked & show when the coolant was fllled. Characteristics:
- low electrical conductivity
- extra pure distilled/deionized water of electrical conductivity of 1µS/cm used for the coolant
-

Includes:: additives against algae & corrosion
- high quality concentrated pigments lead to intense, vivid & saturated colors
- not aggressive towards acrylic, acetal, rubber or other gasket materials
- ecologically friendly (85% degredable in 30 days)
- ROHS compliant
- 2 year shelf time Techical data:
-
Colour: CLEAR
- content: 1000 m L Please note: * As all other non-conductive liquids on the market, this coolant will become conductive & loose its characteristics if it comes in contact with other liquids or dust. It hence is advisable to keep your system free of dust & other particles. * EKWB is not to be held responsible for any damages to hardware. User agrees utlizing at own risk. * EKWB recommend proper flushing of all previously used watercooling components in order to minimize the risk of discolouring of EKoolant. * Ekoolant already contains an anti-algae additives. Therefore we do not recommend adding of any extra anti-algae or anti-microbial agents. The addition of any other substances may result in a chemical reaction, which can cause dye breakdown & clogging which can harm your system. *EKWB recommends changing liquid at least once a year or sooner.












...

New EK Multioption reservoirs, now in revision 2 offers a highest multioption position of incoming & outcomming tube connections. User can use each fitting/barb as inlet or outlet connection. Reservoirs are made from quality material. Tops & bottoms are made from POM Acetal material, the tube is made from quality acrilyc glass. Specifications: Dimensions: 250 x 60 mm (height x diameter)

Material: Plexiglas, POM Weight: 380 g Capacity: 285 m L Thread: 4x 1 / 4 inch (3x floor, 1 cap) Accessories: 2x Mounting brackets 2x plug 1x internal tube 16/12 mm 2x Allen for installation

...

EK-Quantum Torque HDC 16 fittings are EKs new minimalistic 16mm hard-tube compression fittings designed for use with solid tubing such as Acrylic & PETG. With a non-intrusive, yet striking look, & with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, & are an ideal choice for anyone & a perfect match with EK-Quantum series products. EK-Quantum Torque series products received the prestigious i F Design Award. A robust & industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The Torque family of fittings offers a secure & modular system of connections between liquid cooling components & tubing within a PC. Quantum Torque series products cover angled adapters, rotary & static extenders, splitters, G1/4" plugs, drain valves, fittings, & much more. The locking ring prevents solid tube to be pulled out of the fitting by compressing the rubber gasket underneath the ring. The grooves on the outside allow for easier hand tightening. The compression ring has cutouts in EK Quantum signature shape allowing for the colored aesthetic ring to be shown. The colored rings are available in many colors & are screwed onto the fitting before the compression locking ring. The aesthetic rings are sold separately. The fitting barb & the compression rings are covered with a unique, high-quality satin black finish. Both are made from CNC machined brass & the seal is made quality rubber O-rings. Black EK-Quantum Torque series fittings are intentionally not painted on the inside to reduce the level of possible pollutants in the loop. The base fitting surface is smooth & has no adequate gripping surface, but the inside of the barb is socketed with a 9mm hex Allen key pattern. Its highly recommended to use an Allen Key 9mm (purchased separately) to prevent skin damage to the fingertips while installing the fitting. Please, be advised not to use excessive force when attaching fitting barbs using Allen Key 9mm in order to prevent damage to other liquid cooling products! These fittings are guaranteed to be compatible with all other EK Water Blocks liquid cooling products. If you are interested in buying spare outer o-rings for the G1/4" seal, you can find them here. Technical data:
- Finish: Satin Black
- Thread: G1/4" BSP; 4.5mm male thread length
- Supported tube: 16mm OD
- The outer diameter of a fitting: 24mm
- Installed

Height: 15mm
- Compatible solid tubing: Acrylic, PETG, Copper, Brass, Stainless Steel







...

EK-Quantum Torque Micro Rotary adapter fittings allow you to make a simple 90° turn in the smallest possible footprint & installation height. With an overall installed height of just 21mm, Torque Micro Rotaries can squeeze into the most difficult places where it would be otherwise impossible to make a bend. This means it is 10mm lower in height than the standard 90° EK-Quantum Torque Rotary angled fitting. This Quantum Line adapter fitting is CNC-machined from a solid brass bar & protected with a high-quality satin Silver finish. The two parts of the fitting are permanently assembled & sealed with high-quality rubber O-rings. Satin Titanium EK-Quantum Torque series fittings are intentionally not painted on the inside to reduce the level of possible pollutants in the loop. This precision manufacturing ensures satisfying engagement & a consistent appearance. Since there is no space for conventional knurling, the base of the fitting extends through an opening in the top face where a 6mm Allen key has to be used to secure it in place. Once secured, the body of the fitting is free to rotate in either direction. EK recommends the use of the EK-Loop Multi Allen Key for this application. A male G1/4” thread is screwed into the desired port, & a fully rotatable joint allows the female G1/4” port to be directed in any perpendicular direction. You can install components in very close proximity thanks to this. The centreline of the female G1/4" port is 12.5mm above the mounting surface, the EK-Quantum Torque Micro Rotary 90 rotary angled adapter is compatible with any STC or HDC EK-Quantum Torque fitting. The width & overall diameter of the base is 16.5mm. ...

EK-Supreme LTX (LTX stands for Light XTreme) is a universal Intel socket CPU waterblock for the advanced enthusiast users. It has been designed to lower the production costs yet still offer the EK quality branded CPU waterblock at the best price. EK-Supreme LTX is the direct successor of successful EK-Supreme LT which debuted in 2007. Its main improvements are:
- better flow: due to enhanced channel depth design up to 10% higher flow compared to EK-Supreme LT
- better cooling performance The EK-Supreme LTX cooling engine uses fin design. The water (coolant) accelerates through 46 very thin channels which provide extreme cooling surface area. Very thin copper base bottom wall even further improves cooling performance. The base plate is made from electrolytic copper lapped & polished to +/- 0.0007mm flatness. The top is made from quality POM Acetal material. CPU socket compatibility:
- Intel LGA-775
- Intel LGA-1366
- Intel LGA-1155/1156
- Intel LGA 2011





...

EK-Supreme LTX AMD (LTX stands for Light XTreme) is a universal AMD socket CPU waterblock for the advanced enthusiast users. It has been designed to lower the production costs yet still offer the EK quality branded CPU waterblock at the best price. EK-Supreme LTX AMD is the direct successor of successful EK-Supreme LT which debuted in 2007. Its main improvements are:
- better flow: due to enhanced channel depth design up to 10% higher flow compared to EK-Supreme LT
- better cooling performance The EK-Supreme LTX cooling engine uses fin design. The water (coolant) accelerates through 46 very thin channels which provide extreme cooling surface area. Very thin copper base bottom wall even further improves cooling performance. The base plate is made from electroless nickel plated (EN) electrolytic copper lapped & polished to +/- 0.0007mm flatness. The top is made from quality acrylic material. CPU socket compatibility:
- AMD Sockets: 939, 754, 940
- AMD Sockets: AM2, AM2+, AM3, AM3+ Option
- Nickel Plexi Threads
- G1/4 Prepared for LED Diode
- 3mm Sockets
- AMD







...

EK-Supreme LTX AMD (LTX stands for Light XTreme) is a universal AMD socket CPU waterblock for the advanced enthusiast users. It has been designed to lower the production costs yet still offer the EK quality branded CPU waterblock at the best price. EK-Supreme LTX AMD is the direct successor of successful EK-Supreme LT which debuted in 2007. Its main improvements are:
- better flow: due to enhanced channel depth design up to 10% higher flow compared to EK-Supreme LT
- better cooling performance The EK-Supreme LTX cooling engine uses fin design. The water (coolant) accelerates through 46 very thin channels which provide extreme cooling surface area. Very thin copper base bottom wall even further improves cooling performance. The base plate is made from electrolytic copper lapped & polished to +/- 0.0007mm flatness. The top is made from quality cast acrylic material. CPU socket compatibility:
- AMD Sockets: 939, 754, 940
- AMD Sockets: AM2, AM2+, AM3, AM3+ Option
- Copper Plexi Threads
- G1/4 Prepared for LED Diode
- 3mm Sockets
- AMD







...

EK-Supreme LTX (LTX stands for Light XTreme) is a universal Intel socket CPU waterblock for the advanced enthusiast users. It has been designed to lower the production costs yet still offer the EK quality branded CPU waterblock at the best price. EK-Supreme LTX is the direct successor of successful EK-Supreme LT which debuted in 2007. Its main improvements are:
- better flow: due to enhanced channel depth design up to 10% higher flow compared to EK-Supreme LT
- better cooling performance The EK-Supreme LTX cooling engine uses fin design. The water (coolant) accelerates through 46 very thin channels which provide extreme cooling surface area. Very thin copper base bottom wall even further improves cooling performance. The base plate is made from electroless nickel plated (EN) electrolytic copper lapped & polished to +/- 0.0007mm flatness. The top is made from quality cast acrylic material. CPU socket compatibility:
- Intel LGA-775
- Intel LGA-1366
- Intel LGA-1155/1156
- Intel LGA 2011





...

The EK-DCP 2.2 Water Pump is the ideal accessory for all enthusiast water cooling systems, & is compatible with the all standard water cooling system setups. The EK-MCP 2.2 will easily integrate with the latest water blocks & can achieve up to 400L / hour with its compact, powerful & low-noise design. Extremely reliable & ultra-quiet, the EK-DCP pump will work silently to ensure your cooling system operates at its peak & makes the most for your hardware overclocking potential. Model: EK-DCP 2.2 Rated voltage: DC12V +/-10% Starting voltage: DC 8V above Power Consumption: 6.5W +/-10% Load current: 0.62A +/-10% Q-max: 400 L/hr +/-10% H-max.: 2.2m +/-10%

Size: 52 x 45 x 50mm Life Expectancy: 50000/hrs at 25 degrees Noise: 17.2 d B * Please Note this product does not come with connections. In order to connect it to a new or existing system you will require QF 191919 or QF 191927 Enclosed: 1 EK-DCP Pump 1 x Anti-vibration Pad 1 x 3pin to 4pin Cord 2x Brackets

...