The Edimax ES-5208P is a web-smart switch with 8 Fast Ethernet Po E+ ports & 2 Gigabit Combo ports. It easily connects & supplies power to Po E-enabled devices such as wireless access points, network cameras & IP phones as well as other Ethernet-enabled devices such as computers, printers & network attached storage (NAS). ES-5208P is designed with easy management, all configuration can be performed through an intuitive browser-based Graphical User Interface. Ideal for small or medium network environments to strengthen the network connection, its standard 13-inch rack-mount brackets allow for integration with the most widely used mounting systems on the market. IEEE 802.3at Power over Ethernet (Po E+) Auto Detection The ES-5208P features 8 IEEE 802.3at Power over Ethernet (Po E+) ports that supply up to 30 watts of electricity per port. It can convert standard 100~240V/AC power into low-voltage DC that runs over existing LAN cables to supply power to IEEE 802.3at compliant network accessories. The ES-5208P features Po E+ device detection to verify whether individual, connected devices are IEEE 802.3at compliant or not, so only data will be sent via the LAN cable if the device is not a Po E or PE device. Various Po E products such as Access Points, IP cameras or IP phones are easily connected to the switch, making it the perfect solution when power outlets are difficult to install or existing power outlets are too far from devices. Cost-Effective, No Special Networking Cable Required Reduce your installation time & cost by using a standard Cat-5e Ethernet cable to link between the ES-5208P switch & powered devices (PD). The Ethernet cable will then transmit both data & power, so you won't need all those extra power cables to your powered devices (PD). Smart Features Supported The ES-5208P Web smart features can be managed through a Web Browser. The smart features include simple Qo S/ Co S applications & basic monitoring tools to improve network efficiency. The ES-5208P also supports bandwidth control & port based VLAN. Through a Web interface, an administrator can set up VLANs to segregate traffic & Qo S to prioritize mission-critical data. All of these features offer extra protection on the network edge. Best of all, the password-protected configuration interface can be accessed remotely. It increases the IT manager‘s mobility. High Performance The ES-5208P switch also supports auto-negotiation & non-blocking wire speed to give you the maximum speed & highest performance possible for each device connected to your network. • Auto-Negotiation Each of the ES-5208P’s ports automatically detect whether connected network devices are running at 10 Mbps or 100 Mbps & half-duplex or full-duplex mode, & adjusts the speed & mode accordingly ensuring easy & hassle-free operation. • Non-Blocking Wire Speed Forwards & receives traffic seamlessly – each port supports speeds up to 200 Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices & allowing you to run a high speed network smoothly. Power Saving Along with the Fast Ethernet speeds critical for next-generation network applications, the ES-5208P offers environmental efficiency. To comply with the IEEE802.3az standard, the ES-5208P provides power saving functionality to reduce energy consumption & save costs: • Inactive Link Detection When a network device is shut down and/or an inactive link is detected, the power usage adjustment feature automatically reduces power usage. The switch’s power consumption will be dynamically adjusted according to the link status & the number of active network devices. • Cable Length Detection Devices equipped with this feature automatically detect the length of connected Ethernet cables & adjust power usage accordingly. The shorter the cable length, the less power it consumes. ...

The ES-3308P is a 10/100 Mbps unmanaged Ethernet desktop switch designed to enhance network performance. It’s compact, sleek design offers outstanding performance & high efficiency, using store & forward packet-switching technology to provide reliable data transfers, ideal for network connectivity in the SOHO environment. To extend home networks or meet online gaming, multimedia transfer or streaming requirements the ES-3308P is a cost-effective Fast Ethernet solution. The plug-&-play design ensures users can easily connect network devices such as PCs, network-attached storage or print servers to a home network with no manual configuration necessary. Supports Auto-Negotiation Each of the ES-3308P’s ports automatically detect whether connected network devices are running at 10 Mbps or 100 Mbps & half-duplex or full-duplex mode, & adjusts the speed & mode accordingly ensuring easy & hassle-free operation. Supports Non-Blocking Wire Speed The ES-3308P forwards & receives traffic seamlessly with its non-blocking wire-speed. Every port of the ES-3308P supports speeds up to 200 Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices & allowing you to run a high speed network smoothly. IEEE Energy Efficient Ethernet (EEE) Compliance Along with the Fast Ethernet speeds critical for next-generation network applications, the ES-3308P offers environmental efficiency. To comply with the IEEE802.3az standard, the ES-3308P provides power saving functionality to reduce energy consumption & save costs: Inactive Link Detection When a network device is shut down and/or an inactive link is detected, the power usage adjustment feature automatically reduces power usage. The switch’s power consumption will be dynamically adjusted according to the link status & the number of active network devices. Cable Length Detection Devices equipped with this feature automatically detect the length of connected Ethernet cables & adjust power usage accordingly. The shorter the cable length, the less power it consumes. Easy to Use The ES-3308P is plug-&-play & supports a wide range of network protocols. Installation & network management is quick & straightforward, & clear & convenient LED indicators display easy to read port & switch status. ...

The GS-1026 V2 is 24-port gigabit with 2 SFP slots rack-mount switch, that is designed for medium or large network environment to strengthen its network connection. Including rack-mount brackets, the 19" size switch fits into your rack cabinet. It is a superb choice to boost your network with higher performance & efficiency. Built-in 2 SFP slots The GS-1026 V2 is built in with 2 SFP slots to uplink to the server, storage, or other switch. You can make the connection by plugging in standard SFP fiber modules for long distance applications. Supports High-Speed Networking & Jumbo Frames The GS-1026 V2 is an excellent solution to expand your Gigabit network. With Gigabit speed, the GS-1026 V2 gives high flexibility & high bandwidth connectivity to servers, workstations & other attached devices. It enables you to save time when transferring large files. In addition, it also supports Jumbo Frames 9K to improve network utilization in large files transfer. Plug & Play, No Installation Required Just plug Ethernet enabled devices into the switch. Data can be transmitted through existing standard Cat-5e Ethernet cables with no additional cables or configuration required. High Performance The GS-1026 V2 switch also supports auto-negotiation, non-blocking wire speed, auto-MDI/MDI-X & store & forward architecture to give you the maximum speed & highest performance possible for each device connected to your network. • Auto-Negotiation Each of the GS-1026 V2 ’s ports automatically detect whether connected network devices are running at 10 Mbps or 100 Mbps & half-duplex or full-duplex mode, & adjusts the speed & mode accordingly ensuring easy & hassle-free operation. • Non-Blocking Wire Speed Forwards & receives traffic seamlessly – each port supports speeds up to 200 Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices & allowing you to run a high speed network smoothly. • Supports Auto-MDI/MDI-X Every port of the GS-1026 V2 can automatically detect the type of cables. There is no need to choose crossover or parallel cables when you are connecting this switch to another switch or to a computer. • Supports Store & Forward Architecture With the store & forward architecture filters fragment & CRC error packets, the GS-1026 V2 can maximize network performance while minimizing the propagation of bad network packets. Power Saving Along with the Fast Ethernet speeds critical for next-generation network applications, the GS-1026 V1 offers environmental efficiency. To comply with the IEEE802.3az standard, the GS-1026 V2 provides power saving functionality to reduce energy consumption & save costs: • Inactive Link Detection When a network device is shut down and/or an inactive link is detected, the power usage adjustment feature automatically reduces power usage. The switch’s power consumption will be dynamically adjusted according to the link status & the number of active network devices. • Cable Length Detection Devices equipped with this feature automatically detect the length of connected Ethernet cables & adjust power usage accordingly. The shorter the cable length, the less power it consumes. Fan-less Design Since the fan-less design provides quiet operation & helps to extend the device’s lifetime in office spaces, the GS-1026 V2 is the perfect solution for small business & SOHO office deployments. ...

The Edimax Pro GS-5424PLG is a web-smart switch with 24 Gigabit Po E+ ports & 4 Gigabit SFP slots. Designed for medium to large network environments, its standard 19-inch 1U rack-mount brackets allow for integration with the most widely used mounting systems on the market. The Edimax GS-5424PLG is a superb choice to boost your network environment’s performance & efficiency. IEEE 802.3at/af Power over Ethernet Standard The GS-5424PLG features 24 IEEE 802.3at Power over Ethernet (Po E+) ports which supply up to 30W of electricity per port, & has a total power supply of 400W to power any IEEE 802.3at or 802.3af compliant power device. With Po E detection capability, the GS-5424PLG is able to verify whether the connected device is IEEE 802.3at or 802.3af compliant. In the event that a Po E device is not detected, only network data will be transmitted through the LAN cable. The GS-5424PLG can be used with different Po E products such as access points, network cameras or Vo IP devices & is an effective solution for network environments where power outlets are difficult to access. Po E for Easy Installation & Better Cost Efficiency Power over Ethernet technology enables the Ethernet cable to carry both data & power, reducing cable installation & eliminating the need for extension cords or electrical outlets on the walls & ceiling. Overall the GS-5424PLG can lower installation cost & simplify deployment efforts. Power-Budget User Interface for Po E Device Management The GS-5424PLG features an innovative power-budget UI (user interface) which allows IT managers to monitor the power consumption of each Po E port & the total power consumption of connected Po E devices. Monitor the entire Po E network & assess the total power usage before adding new Po E devices to the network architecture. The power-budget UI also features a remote on/off function for each Po E port, so manual plug/unplug isn’t necessary when a Po E device hangs. Simply use the remote power button to quickly reset the device. Smart Tools for enhanced Network Efficiency The GS-5424PLG features smart network monitoring tools that allow for enhanced network efficiency. Security & management features include bandwidth control & VLAN (IEEE 802.1Q VLAN tagging & port-based VLAN). Using its web-based interface, administrators can set up VLANs to segregate traffic & configure link aggregation settings to create fat traffic pipelines. in addition, these features offer extra protection on the network edge & the password-protected configuration interface can be accessed remotely. ...

The ES-5500G V3 is a 10/100/1000 Mbps Gigabit Desktop unmanaged switch designed to enhance network performance in a compact form factor, & with outstanding performance & high efficiency. The switch uses store & forward packet-switching technology which offers reliable data transfer, making it ideal for network connectivity for the SOHO environment. The ES-5500G V3 has a tough plastic housing, & offers a cost-effective Gigabit Ethernet solution for users to easily extend home networks & to fulfil their online gaming, multimedia transferring & streaming needs. The plug-&-play design allows users to easily connect network devices such as PCs, network storage & print servers to the home network without manual configuration involved. The ES-5500G V3 offers environmental efficiency with Fast Ethernet speeds critical for next-generation network applications. To comply with the IEEE802.3az standard, the ES-5500G V3 provides power saving functions to reduce energy consumption to help save costs. When a network device is shut down and/or an inactive link is detected, the power usage adjustment feature automatically reduces power usage. The switch's power consumption will be dynamically adjusted according to the link status & the number of active network devices. ...

Edimax EN-9260TX-E Gigabit Etthernet PCI Express Network Interface Card The EN-9260TX-E network adapter for PCs with PCI Express slots offers the latest technology in power management & Gigabit Ethernet network connectivity capability. The EN-9260TX-E's full bandwidth capability boasts a robust 1000 Mbps capability through the PCI Express bus architecture. There's no need to purchase a new switch or broadband router because the adapter's auto-negotiation feature works with your existing switch, broadband router, or hub to provide the highest network speed available (10/100 or 1000 Mbps). The adapter's automatic full duplex capability further increases bandwidth & eliminates packet collisions by allowing data to flow in both directions at the same time. Key Features Complies with PCI Express 1.0a – x 1 PCI Express standard IEEE 802.3, 802.3u, 802.3ab & 802.3x standards

Includes:: a Setup Wizard program Supports 10/100/1000 Mbps Auto Negotiation & jumbo frame Easy Plug-&-Play installation
- auto setup of IRQ & I/O address First-class Reliability The EN-9260TX-E's exceptional chipset offers increased bandwidth & more functionality than other standard PCI network adapters. The adapter is specifically designed to carry the full bandwidth capacity of the PCI Express bus of 2.5 Gbps, thus eliminating collisions & latencies that exist with current 32 & 64 bit PCI bus architectures. Ease of Installation & Configuration The EN-9260TX-E offers ease & flexibility of installation & configuration of the adapter through Plug & Play technology. Simply place the adapter into the PCI Express slot in your PC & then turn on the PC; plug-n-play automatically detects the new device. The adapter is fully compatible with Ethernet, Fast Ethernet, & Gigabit Ethernet networks & the adapter's 10/100/1000 Mbps auto negotiation ports eliminate any need for manual switching. Best of all, the adapter is supported by all major operating systems including Vista & Linux OS User-friendly Setup CD Wizard & Driver To facilitate network connectivity, the EN-9260TX-E

Includes:: a user-friendly setup CD wizard. Its user interface simplifies & enhances driver installation for immediate use of the device. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.




...

- Device Type: Po E injector
- external
- Power Over Ethernet (Po E): Po E+ (IEEE 802.3at) Power Device
- Input Voltage:


...

1 Port USB2.0 Combo GDI (Graphic Device Interface) Print Server Inc Print Server, CD, Drivers Key Features Share your GDI (Graphical Device Interface) Printer on the network Easy Installation & Configuration Runs in Windows GDI Protocol Shares one USB (Universal Serial Bus) GDI/ Host based Printer to all Network Users Supports TCP/IP network protocols Supports DHCP Server & Client protocols Support GDI Printers with Win 2000/XP/ Vista Product

Specification Flash 512KB NOR Flash RAM 2MB SDRAM USB (Universal Serial Bus) Port USB (Universal Serial Bus) 2.0 Type A x 1 LAN Port 10/100M UTP Port x 1 (Auto-MDI/MDI-X) Power 7.5VDC, 0.5A Power Adapter Dimension 20 (H) x 58 (W) x 75 (D) mm Temperature 0 55oC Humidity 10 90% (Non-Condensing) Certification FCC, CE, C-Tick

...

The Edimax IC-3030 is tailor made to stream live video over your network. You can view the IP cameras video from anywhere on your local computers or via the Internet. The Edimax IC-3030 features high quality & high frame rate video streaming through advanced video compression. Supports H.264, MPEG4 & M-JPEG Triple mode video streaming Features multi-area motion detection & snapshot to E-mail & FTP Features Manual Focus Lens Supports up to 30 fps Video Frame Rate @ VGA Supports 2-way audio High speed hardware based compression Supports pre-recording + post-recording for the triggered event

Includes:: easy-to-view 16-channel viewer to views up to 16 cameras simultaneously* Built-in SDHC/SD card slot to store snapshots & recorded video locally to a SDHC/SD memory card Manual/ Schedule/ Cycle recording & Playback/ Forward/ Pause/ Stop video with the software utility Supports up to 16 user login accounts for web access Supports Windows 2000/XP/ Vista/7 Firmware upgradable Live Streaming Video The Edimax IC-3030 series is tailor made to stream live video over your network. You can view the IP cameras video from anywhere on your local computers or via the Internet. The Edimax IC-3030 series

Includes:: software that means that you can view up to 16 cameras images simultaneously.* High Quality & speed. Supports H.264, MPEG4 & M-JPEG The Edimax IC-3030 series features high quality & high frame rate video streaming through advanced video compression. In order to achieve the highest video quality, simply select H.264, MPEG4 or M-JPEG depending on your network settings. Features Multi-Areas Motion Detection The Edimax IC-3030 series is a powerful mobile surveillance system with intelligent multi-area motion detection. Pre-determine 3 areas on your streaming video for motion detection to effectively monitor your home, pets or business. When motion is detected in one of these areas, the camera records & sends footage of the events to E-mail or FTP server. It also borrows technology from the fancier Edimax IC-7010 series for Pre- & Post-recording, allowing you to view events before & after the motion event. Store Recordings Locally with SDHC/SD Memory Card Slot Should your network or Internet connection experience difficulty, the Edimax IC-3030 series will save footage locally to a SDHC or SD memory card for your perusal at a later time. Supports 2-way Audio The Edimax IC-3030 series

Includes:: a microphone & audio output for speaker connection, so you can listen & speak to the remote site through your web browser. Records Video Clips Record video clips & replay at a time of your convenience. Set a schedule for recording or manually activate recording whenever you wish to. Supports DDNS** & UPn P With DDNS, you are allowed to access Edimax IC-3030 series by inputting easy-to-memorize URL rather than having to type an IP address in your web browser. DDNS is also ideal for those without a fixed public IP address. UPn P allows Windows XP/ Vista/7 users to access the device with the simple click of a mouse button. * For system requirements, please check the details in the manual ** Users need to register with a DDNS server





...

The Edimax IC-3100 network camera is a versatile monitoring device ideal for home & SOHO users. With Edimax’s innovative Plug-n-View technology, the camera connects to the cloud automatically, so you can monitor your home with a smartphone, tablet, or laptop computer no matter where you are. Its motion-triggered snapshot & recording feature ensures that you capture every criminal event. Edimax Plug-n-View Edimax Plug-n-View technology makes it easy for you to keep an eye on the safety of your home, family, pets, & assets wherever you go. With Plug-n-View technology, you can set up your Edimax network camera in a few simple steps. The camera also connects to the cloud automatically, so you can access it remotely with a smartphone, tablet, or computer no matter where you are. Motion-Triggered Snapshots & Recording The powerful multi-area motion detection system built into this network camera ensures that you have evidence of a criminal event as soon as it occurs. You can pre-define multiple areas in the monitored range for motion detection; & when motion is detected in the specified areas, this network camera will produce snapshots or video footage of the criminal event immediately. Supports 2-Way Audio The Edimax IC-3100 is designed with 2-way audio support. It has a microphone & an audio output for speaker connection. By connecting speakers to the camera, users can remotely communicate with people at the site where the network camera is installed, or even ward off an intruder when necessary. Specifications
- Video/ Audio
- 1.3 megapixel CMOS sensor
- 1.0 lux
- 5mm, f/2.8
- Recording format: AVI
- Video compression: H.264, MPEG&8208;4 & M&8208;JPEG
- 2-way audio Standards
- Fast Ethernet IEEE 802.3/802.3u LED Indicators
- LAN
- Power/ Cloud Interface
- 1 x Ethernet (RJ-45) port
- 1 x Power jack
- 1 x Audio output
- 1 x Microphone
- 1 x SDHC/SD card slot (up to 32GB)
- 1 x USB (Universal Serial Bus) port for Wi-Fi adapter Management
- Edi View Finder (Windows/ Mac)
- 16-channel viewer
- Web management interface
- Firmware upgradable
- iPhone & iPad viewer app
- Android phone viewer app Memory
- 4MB flash
- 64MB SDRAM Temperature & Humidity
- 0-40° Celsius
- 10-90% (non-condensing) Power
- 12V DC

Dimensions
- 113mm x 80mm x 43mm





























...