Wireless 802.11n Range Extender/ Access Point Acting as a bridge between the wired Ethernet & the 2.4 G Hz IEEE 802.11b/g/n wireless LAN, this wireless LAN Range Extender/ Access Point can let your wireless LAN client stations access both the wired & the wireless network nodes. Universal Repeater Mode The Universal Repeater Mode lets this Range Extender/ Access Point extend the coverage & signal strength for the current wireless environment. This standardized function is compatible with other wireless APs & Routers. Users can use this feature to build up a large wireless network in a huge space like airports, hotels & schools…etc. Robust Wireless LAN Security (WPA, WPA2 support) Except for the basic security control by using ESSID & 64/128 bit key length WEP encryption, the EW-7228 A Pn also supports the advanced security features, like MAC access control, IEEE 802.1x authentication, TKIP, AES & hide ESSID. It provides a total solution for you building up a secure wireless LAN network environment that can prevent from all kinds of hacker intrusion. Multi-languages Setup Wizard An unique Multi-languages Setup Wizard is provided in the bundled CD. You only need to make sure the access point is properly connected to the network without specifying your PC’s IP address before starting the configuration. The EZmax Wizard will detect your Range Extender/ Access Point automatically & guide you to follow a few simple steps to complete the settings within minutes. Web Configuration The EW-7228 A Pn means that you can configure this Range Extender/ Access Point through the friendly Web user interface with a browser. Support Green WLAN The EW&8208;7228 A Pn has adapted a clever protocol in smart transmission power control. When the wireless is idle, the Range Extender/ Access Point smartly adjusts transmission output by distance & CPU offload to reduce power consumption 26%~39% comparing the power consumption under data is transmitted. Complies with IEEE802.11b/g & compatible with IEEE802.11n wireless standards Increases the wireless speed up to 6 times faster & extends the coverage 3 times further Provides EZmax wizard to simplify network setup process Supports point-to-point & point-to-multi point bridge function Supports WDS mode, Universal Repeater mode & AP client mode Supports WPA, WPA2 enhanced security function & WPS configuration button Supports Green WLAN to reduce power consumption by distance & CPU offload when wireless is idle Please note: networking & wireless components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Wireless 802.11n Access Point with Power over Ethernet Acting as a bridge between the wired Ethernet & the 2.4 G Hz IEEE 802.11b/g/n wireless LAN, this wireless LAN access point can let your wireless LAN client stations access both the wired & the wireless network nodes Key Features Complies with the IEEE 802.11b/g & IEEE802.11n standards Complies with IEEE 802.3af Powered Device (PD) standard High data rate up to 300 Mbps network speed Supports hidden SSID function Web-based configuration WDS Bridge Mode (Repeater Mode) The WDS (Wireless Distributed System) function let this access point acts as a wireless LAN access point & repeater at the same time. Users can use this feature to build up a large wireless network in a large space like airports, hotels & schools.. .etc. This feature is also useful when users want to bridge networks between buildings where it is impossible to deploy network cable connections between these buildings Robust Wireless LAN Security (WPA, WPA2 support) Except for the basic security control by using ESSID & 64/128 bit key length WEP encryption, this access point also supports the advanced security features, like MAC access control, IEEE 802.1x authentication, TKIP, AES & hide ESSID. It provides a total solution for you to build up a secure wireless LAN network environment that can prevent from all kinds of hacker intrusion Web Configuration You can configure this access point through the friendly Web user interface with a browser. Two Power Supply options This access point Integrated Po E PD & also provides power jack for regular power adapter. Users can connect the access point with power adapter or Po E switch for power supply. Please note: networking & wireless components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

. rpd-row { overflow:hidden; padding:30px 0; border-bottom: 1px solid eee; }. rpd-row img { max-
Width:100%; }. rpd-left
...

General
- Device Type: Network adapter
- Form Factor: Plug-in card
- Interface (Bus) Type: PCI Express
- PCI







...

Wireless n LITE 3d Bi High Gain USB (Universal Serial Bus) Adapter EW-7711 U Sn is a high-gain wireless USB (Universal Serial Bus) adapter which provides a simple & easy way to add or upgrade wireless connectivity to your desktop or notebook computer. This n LITE high-gain USB (Universal Serial Bus) adapter supports higher data rates up to 150 Mpbs when connected to a wireless 802.11n device. Simply plug it into a computers USB (Universal Serial Bus) port & you can enjoy its incredibly high-speed wireless performance. Key Features Complies with wireless 802.11b/g standards Compatible with wireless 802.11n standard with data rate up to 150 Mbps Increases wireless coverage 3 times further Rotatable & Detachable 3d Bi Antenna Supports 64/128-bit WEP, WPA, WPA2 encryption & WPS-compatible Compatible with wireless 802.11n devices with data rate up to 150 Mbps With the latest wireless 802.11n technology built into it, EW-7711 U Sn can increase the coverage 3 times more & reduce "dead spots" within the wireless range. The transmission data rate when connected to wireless 802.11n devices can reach up to 150 Mbps, making signal travel farther & guarantee wireless connections compared to a standard wireless 802.11b/g network. Supports multi-language EZmax setup wizard The included 16 languages EZmax setup wizard & friendly UI will walk you through configuring EW-7711 U Sn to your wireless network 3d Bi high gain detachable antenna The detachable antenna with extended USB (Universal Serial Bus) cable let you relocate the antenna to receive the best signals. Also, you can change to any high gain aerial with RP-SMA interface. Its rotatable & detachable 3d Bi high gain antenna makes the wireless transmission more stable & reach farther. EW-7711 U Sn is your choice for wireless connection Wireless Security EW-7711 U Sn supports 64/128-bit WEP data encryption that protects your wireless network from eavesdropping. It also supports WPA (Wi-Fi Protected Access) feature that combines IEEE 802.1x & TKIP (Temporal Key Integrity Protocol) technologies. Furthermore, this adaptor supports WPA2 & WPS functions, WPA2 provides a stronger encryption mechanism through AES (Advanced Encryption Standard), which is a requirement for some corporate & government users. Wi-Fi Protected Setup (WPS) is a standard for easy & secure establishment of a wireless network. EW-7711 U Sn supports software WPS-compatible configuration. When both ends of the wireless connection use wireless solution with WPS, it will automatically configure the wireless network with robust WPA data encryption & authentication. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The power saving function saves resources & is light on the pocket, meaning the ES-3316P is an ideal solution for homes & small businesses. 200 Mbps Full Duplex Transmission The ES-3316P complies with IEEE 802.3/IEEE 802.3u 10/100 Mbps Ethernet standard & also supports IEEE 802.3x full duplex transmission. The full duplex feature can double the network throughput on every port & is used for high speed server or switch-to-switch connections. The ES-3316P boasts a maximum throughput of 200 Mbps for every port. Supports Wire Speed & Flow Control The ES-3316P's built-in non-blocking & store-&-forward architecture equips your network with full-wire speed connections. It accommodates flow control for full duplex mode & back pressure for half-duplex mode; ensuring reliable data transfer & preventing data loss. Use the ES-3316P to create high-speed networks & benefit from exceptional performance & reliability. Supports Auto-MDI/MDI-X & Auto Sensing The ES-3316P supports Pn P (plug & play) installation & auto-MDI/MDI-X, meaning you can connect to computers or Ethernet devices without configuration hassles. For your convenience you can use either straight-through or cross-over Ethernet cables & connect both 10 & 100 Mbps devices to the ES-3316P. The switch intelligently detects the correct cable & speed for your device. IEEE Energy Efficient Ethernet (EEE) The ES-3316P offers environmental efficiency together with Fast Ethernet speeds which are critical for next-generation network applications. To comply with the IEEE802.3az standard, the ES-3316P provides power saving functions to reduce costs & energy consumption.
- Device Type: Switch
- 16 ports
- Enclosure Type: Desktop
- Subtype: Fast Ethernet
- Ports: 16 x 10/100
- MAC Address Table

Size: 8K entries
-

Features: Flow control, auto-negotiation, auto-uplink (auto MDI/MDI-X), store & forward, half duplex mode, full duplex mode
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3az
- Status Indicators: Power, link/activity












...

ES-3216P is an ideal energy saving switch integrated with sixteen 10/100 Mbps fast Ethernet ports. The switch is capable of detecting the length of an Ethernet cable connected & automatically supply with the right amount of energy. It also reduces its power consumption if ports are idle Key Features Complies with the IEEE 802.3 & IEEE 802.3u standards Smart Green Ethernet technology to reduce power consumption 30%~50% Provides Store-&-Forward architecture & Full Wire Speed forwarding Supports Auto-MDI/MDI-X, full/half duplex modes & auto-negotiation Supports flow control & Non-blocking architecture 200 Mbps Full Duplex Transmission Edimax ES-3216P is a high speed Fast Ethernet switch for home & small businesses. ES-3216P not only complies with IEEE 802.3/IEEE 802.3u 10/100 Mbps Ethernet standard but also supports full duplex transmission. The full duplex feature can double the network throughput on every port. It is used for high speed server or switch-to-switch connections. The ES-3216P boasts a maximum throughput of 200 Mbps for every port Supports Wire-speed & Flow Control The ES-3216P&8217;s built-in non-blocking & store-&-forward architecture equip your network with full-wire speed connections. It accommodates flow control for full duplex mode & back pressure for half-duplex mode &8211; ensuring reliable data transfer & preventing data loss. Use ES-3216P to create high-speed networks & benefit from its ultimate performance & reliability Supports Auto-MDI/MDI-X & Auto Sensing ES-3216P supports Pn P (plug & play) installation & auto-MDI/MDI-X function. You can connect ES-3216P to computers or to Ethernet devices without configuration hassles. You can conveniently use either straight-through or cross-over Ethernet cable & combine 10 & 100 Mbps devices into ES-3216P. The switch will automatically detect the right cable & speed for your device. ...

The Edimax ES-5208P is a web-smart switch with 8 Fast Ethernet Po E+ ports & 2 Gigabit Combo ports. It easily connects & supplies power to Po E-enabled devices such as wireless access points, network cameras & IP phones as well as other Ethernet-enabled devices such as computers, printers & network attached storage (NAS). ES-5208P is designed with easy management, all configuration can be performed through an intuitive browser-based Graphical User Interface. Ideal for small or medium network environments to strengthen the network connection, its standard 13-inch rack-mount brackets allow for integration with the most widely used mounting systems on the market. IEEE 802.3at Power over Ethernet (Po E+) Auto Detection The ES-5208P features 8 IEEE 802.3at Power over Ethernet (Po E+) ports that supply up to 30 watts of electricity per port. It can convert standard 100~240V/AC power into low-voltage DC that runs over existing LAN cables to supply power to IEEE 802.3at compliant network accessories. The ES-5208P features Po E+ device detection to verify whether individual, connected devices are IEEE 802.3at compliant or not, so only data will be sent via the LAN cable if the device is not a Po E or PE device. Various Po E products such as Access Points, IP cameras or IP phones are easily connected to the switch, making it the perfect solution when power outlets are difficult to install or existing power outlets are too far from devices. Cost-Effective, No Special Networking Cable Required Reduce your installation time & cost by using a standard Cat-5e Ethernet cable to link between the ES-5208P switch & powered devices (PD). The Ethernet cable will then transmit both data & power, so you won't need all those extra power cables to your powered devices (PD). Smart Features Supported The ES-5208P Web smart features can be managed through a Web Browser. The smart features include simple Qo S/ Co S applications & basic monitoring tools to improve network efficiency. The ES-5208P also supports bandwidth control & port based VLAN. Through a Web interface, an administrator can set up VLANs to segregate traffic & Qo S to prioritize mission-critical data. All of these features offer extra protection on the network edge. Best of all, the password-protected configuration interface can be accessed remotely. It increases the IT manager‘s mobility. High Performance The ES-5208P switch also supports auto-negotiation & non-blocking wire speed to give you the maximum speed & highest performance possible for each device connected to your network. • Auto-Negotiation Each of the ES-5208P’s ports automatically detect whether connected network devices are running at 10 Mbps or 100 Mbps & half-duplex or full-duplex mode, & adjusts the speed & mode accordingly ensuring easy & hassle-free operation. • Non-Blocking Wire Speed Forwards & receives traffic seamlessly – each port supports speeds up to 200 Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices & allowing you to run a high speed network smoothly. Power Saving Along with the Fast Ethernet speeds critical for next-generation network applications, the ES-5208P offers environmental efficiency. To comply with the IEEE802.3az standard, the ES-5208P provides power saving functionality to reduce energy consumption & save costs: • Inactive Link Detection When a network device is shut down and/or an inactive link is detected, the power usage adjustment feature automatically reduces power usage. The switch’s power consumption will be dynamically adjusted according to the link status & the number of active network devices. • Cable Length Detection Devices equipped with this feature automatically detect the length of connected Ethernet cables & adjust power usage accordingly. The shorter the cable length, the less power it consumes. ...

The ES-3308P is a 10/100 Mbps unmanaged Ethernet desktop switch designed to enhance network performance. It’s compact, sleek design offers outstanding performance & high efficiency, using store & forward packet-switching technology to provide reliable data transfers, ideal for network connectivity in the SOHO environment. To extend home networks or meet online gaming, multimedia transfer or streaming requirements the ES-3308P is a cost-effective Fast Ethernet solution. The plug-&-play design ensures users can easily connect network devices such as PCs, network-attached storage or print servers to a home network with no manual configuration necessary. Supports Auto-Negotiation Each of the ES-3308P’s ports automatically detect whether connected network devices are running at 10 Mbps or 100 Mbps & half-duplex or full-duplex mode, & adjusts the speed & mode accordingly ensuring easy & hassle-free operation. Supports Non-Blocking Wire Speed The ES-3308P forwards & receives traffic seamlessly with its non-blocking wire-speed. Every port of the ES-3308P supports speeds up to 200 Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices & allowing you to run a high speed network smoothly. IEEE Energy Efficient Ethernet (EEE) Compliance Along with the Fast Ethernet speeds critical for next-generation network applications, the ES-3308P offers environmental efficiency. To comply with the IEEE802.3az standard, the ES-3308P provides power saving functionality to reduce energy consumption & save costs: Inactive Link Detection When a network device is shut down and/or an inactive link is detected, the power usage adjustment feature automatically reduces power usage. The switch’s power consumption will be dynamically adjusted according to the link status & the number of active network devices. Cable Length Detection Devices equipped with this feature automatically detect the length of connected Ethernet cables & adjust power usage accordingly. The shorter the cable length, the less power it consumes. Easy to Use The ES-3308P is plug-&-play & supports a wide range of network protocols. Installation & network management is quick & straightforward, & clear & convenient LED indicators display easy to read port & switch status. ...

The GS-1026 V2 is 24-port gigabit with 2 SFP slots rack-mount switch, that is designed for medium or large network environment to strengthen its network connection. Including rack-mount brackets, the 19" size switch fits into your rack cabinet. It is a superb choice to boost your network with higher performance & efficiency. Built-in 2 SFP slots The GS-1026 V2 is built in with 2 SFP slots to uplink to the server, storage, or other switch. You can make the connection by plugging in standard SFP fiber modules for long distance applications. Supports High-Speed Networking & Jumbo Frames The GS-1026 V2 is an excellent solution to expand your Gigabit network. With Gigabit speed, the GS-1026 V2 gives high flexibility & high bandwidth connectivity to servers, workstations & other attached devices. It enables you to save time when transferring large files. In addition, it also supports Jumbo Frames 9K to improve network utilization in large files transfer. Plug & Play, No Installation Required Just plug Ethernet enabled devices into the switch. Data can be transmitted through existing standard Cat-5e Ethernet cables with no additional cables or configuration required. High Performance The GS-1026 V2 switch also supports auto-negotiation, non-blocking wire speed, auto-MDI/MDI-X & store & forward architecture to give you the maximum speed & highest performance possible for each device connected to your network. • Auto-Negotiation Each of the GS-1026 V2 ’s ports automatically detect whether connected network devices are running at 10 Mbps or 100 Mbps & half-duplex or full-duplex mode, & adjusts the speed & mode accordingly ensuring easy & hassle-free operation. • Non-Blocking Wire Speed Forwards & receives traffic seamlessly – each port supports speeds up to 200 Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices & allowing you to run a high speed network smoothly. • Supports Auto-MDI/MDI-X Every port of the GS-1026 V2 can automatically detect the type of cables. There is no need to choose crossover or parallel cables when you are connecting this switch to another switch or to a computer. • Supports Store & Forward Architecture With the store & forward architecture filters fragment & CRC error packets, the GS-1026 V2 can maximize network performance while minimizing the propagation of bad network packets. Power Saving Along with the Fast Ethernet speeds critical for next-generation network applications, the GS-1026 V1 offers environmental efficiency. To comply with the IEEE802.3az standard, the GS-1026 V2 provides power saving functionality to reduce energy consumption & save costs: • Inactive Link Detection When a network device is shut down and/or an inactive link is detected, the power usage adjustment feature automatically reduces power usage. The switch’s power consumption will be dynamically adjusted according to the link status & the number of active network devices. • Cable Length Detection Devices equipped with this feature automatically detect the length of connected Ethernet cables & adjust power usage accordingly. The shorter the cable length, the less power it consumes. Fan-less Design Since the fan-less design provides quiet operation & helps to extend the device’s lifetime in office spaces, the GS-1026 V2 is the perfect solution for small business & SOHO office deployments. ...