If you often need to share your Internet connection where a power outlet isn’t available, the 3G-6218n 3G router is the best choice for you. Not only is the 3G-6218n currently the smallest 3G router around, the built-in rechargeable Li-ion battery allows this miniature 3G router to be used virtually anywhere. Multiple users can enjoy up to 4 hours of wireless connectivity in a park, on a train, or even in the desert on battery power alone. Supports both 3G/3.5G & cable/x DSL modems Automatically switches to cable/x DSL connection when 3G is not available Internet tethering via iPhone, HTC, Blackberry, Nokia, Sony Ericsson, & other smart phones

Includes:: 16-language EZmax setup wizard for Internet connection, wireless settings, & firmware upgrade Complies with IEEE 802.11b/g/n standards Built-in rechargeable Li-ion battery Supports Green Ethernet & IEEE 802.3az for enhanced energy efficiency Supports WEP, WPA, WPA2, DDNS, Qo S, anti-Do S firewall, MAC/IP filter, URL blocking, virtual server, & DMZ; Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

Wireless 3G Broadband Router with Print Server Shares 3G connection or x DSL/ Cable connection with network users Never be without your broadband with this multi-function router. The 3G-6200N supports not only a standard x DSL/cable connection but if this fails it will switch over to a 3G connection to give you uninterrupted internet connectivity (3G USB (Universal Serial Bus) dongle & contract required). Key Features Shares 3G/3.5G & x DSL Internet connection Internet connection backup Impressive Data Transmission Rate via IEEE802.11n Easy setup with EZMax Multi-language wizard Hardware WPS (Wi-Fi Protected Setup) & Wireless on/off Button Shares 3G/3.5G or x DSL Internet connection or Printer The 3G-6200n is a multi-function wireless broadband router. When connecting either a 3G or 3.5G USB (Universal Serial Bus) modem card* to 3G-6200n, all network (wired / wireless) users can share 3G/3.5G Internet connection. The 3G-6200n can support 3G/3.5G speeds up to 7.2 Mbps & comes with a built-in Ethernet WAN port for Cable modem or x DSL modem. When connected to a x DSL / Cable broadb&, 3G-6200n will enable the x DSL / Cable broadband connection automatically when 3G/3.5G Internet connection is not available. 3G-6200n USB (Universal Serial Bus) port can also function as a print server. When you connect with a USB (Universal Serial Bus) printer, the device can be a print server allowing user to share printer through the network. Edimax EZView & Remote Management Edimax EZView is a new enhanced management system in 3G-6200n which means that you can manage your router locally or remotely from the Internet. UPn P compatible devices are automatically detected & information about the device will be listed in the management interface of the router. You will be able to directly manage device information like IP address, bandwidth control, open ports & DMZ. High Performance Hardware Design & Impressive Data Transmission Rate via IEEE802.11n Edimax 3G-6200n is a high speed solution that complies with wireless IEEE 802.11b/g, & is compatible with IEEE 802.11n standard. When fine-tuned to operate using the wireless 802.11n technology, 3G-6200n wireless data transmission rate can reach up to 150 Mbps
- a coverage 3 times better than a standard 802.11g/b router. This router is a high performance Internet sharing router with 3G function, which enables multiple users to download files at same time. Easy setup with EZMax Multi-language wizard A unique multi-language setup wizard is included in the installation CD. You can setup the router to the Internet within minutes by following the simple animated steps Hardware WPS (Wi-Fi Protected Setup) & Wireless on/off Button The WPS button lets you activate the wireless protection. One-Click WPS button helps you setup a secure wireless network in a snap. 3G-6200n features a control button on its back panel to enable the easy switching on & off of the Wi-Fi wireless connection. When you want to use only wired connection, you can simply pause the Wi-Fi option by pressing the button without making any extra setting. Please note: networking & wireless components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.
...

150 Mbps Wireless 3G Compact Router Key Features Shares 3G connection or x DSL/ Cable connection with network users Supports x DSL or cable broadband backup when 3G is not available Provides USB (Universal Serial Bus) 2.0 port for UMTS/HSDPA/CDMA mobile Internet service

Includes:: EZmax setup wizard for Internet connection & wireless security Complies with IEEE 802.11b/g & compatible with IEEE802.11n standard Share your 3G, 3.5G or x DSL Internet Connection The Edimax 3G-6200n L is a compact & powerful wireless 3G router that supports connection speeds of up to 7.2 Mbps. Connect either a 3G or 3.5G USB (Universal Serial Bus) modem card* to this miniture broadband router & all your network users (wired & wireless) can share the Internet connection. The Edimax 3G-6200n L also has a built-in Ethernet WAN port for a cable modem or x DSL line, so when your 3G/3.5G Internet connection is not available, the Edimax 3G-6200n L will automatically switch to your wired Internet connection. Compact with Multi-language User Interface The Edimax 3G-6200n L is currently the worlds smallest wireless 3G router! Configuration is made extra easy as the built-in 14-language graphical user interface guides you from start to finish Impressive Data Transmission Rate via IEEE802.11n The Edimax 3G-6200n L complies with wireless IEEE 802.11b/g, & is compatible with the IEEE 802.11n standard. The Edimax 3G-6200n L wireless data transmission rate can reach up to 150 Mbps when fine-tuned to using the wireless 802.11n technology – a coverage 3 times greater than a standard 802.11g/b router Easy setup with EZMax Multi-language wizard In addition to the built-in user interface, a unique multi-language setup wizard is included on the installation CD. You can setup the router to the Internet within minutes using the easy-to-follow animated steps One-Click Hardware WPS (Wi-Fi Protected Setup) The Edimax 3G-6200n L has a One-Click WPS (Wi-Fi Protected Setup) button to help you setup & activate a secure wireless network in a snap.

...

The Edimax NC-213E is an ONVIF compliant true day & night network camera with QXGA (2048 x 1536) video resolution at 20fps, which allow you to capture detailed videos in daylight or at night. With Edimax’s superior H.264 video compression technology, the NC-213E can create high quality videos with small file sizes, allowing for optimized network bandwidth efficiency. The NC-213E comes with Edi View 32 software
- a 32-channel viewing, recording & management program that allows for simultaneous live monitoring & high-resolution video recording. in addition, with the Edisecurity Smartphone Viewer application users will be able to see images from the NC-213E from any Internet connection, anywhere in the world. The Edimax NC-213E is built to produce high quality 3 megapixel videos that capture every detail in a monitored area. You can set the camera to record Full HD 1080p (1920 x 1080) videos at 30 frames per second, or even QXGA (2048 x 1536) videos at 20 frames per second. It offers true day & night functionality to capture clear videos 24 hours a day, & the built-in SD/SDHC card slot allows for local data storage in the case of a network disconnection. The NC-213E complies with the IEEE 802.3af Power over Ethernet standard, which enables power & data transmission over a single Ethernet cable & eliminates the hassle of needing to install an additional power adapter.
...

Edimax BR-6314K 4-Port Broadband Router BR-6314K is a full-featured broadband router that establishes with connection to local area network or individual PC with build-in 4-port Switch. It uses advanced Wave Plus broadband router solution provides complete set of industry standard features (PPPo E / Static IP/DHCP/L2TP/PPTP/ Telstra Big Pond) for high-speed Internet access. It also offers easy installation & cost-effective connection for corporate, SOHO & residential users Key Features Complies with IEEE802.3 & IEEE802.3u standards Built-in 4 10/100 Mbps Ethernet ports

Includes:: multi-languages setup wizard Built-in hardware NAT for high throughput Supports UPn P, DHCP server, DDNS, IP/MAC filter, DMZ & virtual server EZmax Multi-languages Setup Wizard A unique 16-language setup wizard is included in the CD ROM. You can select your native language & follow the simple steps to setup Internet connection, password & firmware upgrade High Throughput BR-6314K built-in hardware-based NAT function to decrease CPU loading. The hardware NAT can provide you high performance throughput to access Internet application quickly Virtual Server & DMZ For application that demand open port such as network gaming & web server, the Virtual Server & DMZ functions will provide the ideal solution Internet Connection Sharing Integrated 4-port Ethernet switch, BR-6314K is able to maximize Cable or x DSL Internet connection. With the built-in DHCP server & NAT function, it allows up to 253 devices share the Internet connection at the same time

...

Compact Desktop & Wall-Mount Design: Easy & flexible placement to keep desk space free, ideal for SOHO environments. Easy to Use: Plug-&-play installation with no configuration required. High Performance: Supports auto-negotiation & non-blocking wire speed for maximum-speed high performance data transfer. Power Saving: Supports IEEE802.3az Energy Efficient Ethernet with link status & cable length detection. High Efficiency: Wire-speed packet filtering & forwarding rate. Reliable Data Transfer: Store-&-forward architecture filters fragment & CRC error packets. The ES-3305P V3 is a 10/100 Mbps unmanaged Ethernet desktop switch designed to enhance network performance. It’s compact, sleek design offers outstanding performance & high efficiency, using store & forward packet-switching technology to provide reliable data transfers, ideal for network connectivity in the SOHO environment. To extend home networks or meet streaming, multimedia transfer & online gaming requirements the ES-3305P V3 is a cost-effective Fast Ethernet solution. The plug-&-play design ensures users can easily connect network devices such as PCs, network-attached storage or print servers to a home network with no manual configuration necessary. ...

Five 10/100 Mbps Fast Ethernet ports & four Po E+ ports IEEE 802.3af/at Po E compliant (ports 1
- 4) for simplified deployment
...

The Edimax ES-5104PH is a five Port Fast Ethernet switch with four Po E+ Ports designed for use in home, small or medium sized network environments. It easily connects & supplies power to Po E-enabled devices such as wireless access points, network cameras & IP phones as well as other Ethernet-enabled devices such as computers, printers & network attached storage (NAS). The device's compact size & fan-less design make it an ideal solution for expanding home & small business networks. IEEE 802.3at Power over Ethernet (Po E+) Auto Detection The ES-5104PH features four IEEE 802.3at Power over Ethernet (Po E+) ports which supply up to 30 watts of electricity per port. It can convert standard 100&8208;240V AC power into low&8208;voltage 48
- 55V DC electricity to power IEEE 802.3at compliant network accessories via existing LAN cables. With Po E detection capability, the ES-5104PH is able to verify whether the connected device is IEEE 802.3at compliant. In the event that a Po E device is not detected, only network data will be transmitted through the LAN cable – meaning easy setup & management of network devices such as access points & network cameras. Plug & Play, No Installation Required Just plug Ethernet or Po E enabled devices into the switch. Data & power can be transmitted through existing standard Cat-5e Ethernet cables with no additional cables or configuration required. The ES-5104PH reduces the difficulty, time & cost of network setup. Flexible Network Deployment & Energy Efficient The ES-5104PH Po E+ switch is a fast & effective solution when power outlets are unavailable for your network devices. The switch in addition supports IEEE 802.3az Energy Efficient Ethernet which allows for less power consumption & reduced costs during periods of low data activity. Fan-Less Quiet & Compact Design A fan-less design ensures quiet operation & enables an even more compact design, keeping valuable desk space free in home or small office environments. High Performance The ES-5104PH switch also supports auto-negotiation & non-blocking wire speed to give you the maximum speed & highest performance possible for each device connected to your network. • Auto-Negotiation Each of the ES-5104PH’s ports automatically detect whether connected network devices are running at 10 Mbps or 100 Mbps & half-duplex or full-duplex mode, & adjusts the speed & mode accordingly ensuring easy & hassle-free operation. • Non-Blocking Wire Speed Forwards & receives traffic seamlessly – each port supports speeds up to 200 Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices & allowing you to run a high speed network smoothly. Power Saving Along with the Fast Ethernet speeds critical for next-generation network applications, the ES-5104PH offers environmental efficiency. To comply with the IEEE802.3az standard, the ES-5104PH provides power saving functionality to reduce energy consumption & save costs: • Inactive Link Detection When a network device is shut down and/or an inactive link is detected, the power usage adjustment feature automatically reduces power usage. The switch’s power consumption will be dynamically adjusted according to the link status & the number of active network devices. • Cable Length Detection Devices equipped with this feature automatically detect the length of connected Ethernet cables & adjust power usage accordingly. The shorter the cable length, the less power it consumes. Expansion / Connectivity
- Interfaces: 4 x 100 Base-TX
- RJ-45
- Po E+
- 30 W 1 x 100 Base-TX
- RJ-45 Power
- Power Device: External power adapter
- Voltage Required: AC 120/230 V (50/60 Hz ) Miscellaneous
- Compliant Standards: Plug & Play, FCC, Ro HS

Dimensions & Weight
-

Width: 16 cm
-

Depth: 9.25 cm
-

Height: 2.8 cm
- Weight: 340 g




















...

The ES-3305P is a 10/100 Mbps unmanaged Ethernet desktop switch designed to enhance network performance. It’s compact, sleek design offers outstanding performance & high efficiency, using store & forward packet-switching technology to provide reliable data transfers, ideal for network connectivity in the SOHO environment. To extend home networks or meet online gaming, multimedia transfer or streaming requirements the ES-3305P is a cost-effective Fast Ethernet solution. The plug-&-play design ensures users can easily connect network devices such as PCs, network-attached storage or print servers to a home network with no manual configuration necessary. Supports Auto-Negotiation Each of the ES-3305P’s ports automatically detect whether connected network devices are running at 10 Mbps or 100 Mbps & half-duplex or full-duplex mode, & adjusts the speed & mode accordingly ensuring easy & hassle-free operation. Supports Non-Blocking Wire Speed The ES-3305P forwards & receives traffic seamlessly with its non-blocking wire-speed. Every port of the ES-3305P supports speeds up to 200 Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices & allowing you to run a high speed network smoothly. IEEE Energy Efficient Ethernet (EEE) Compliance Along with the Fast Ethernet speeds critical for next-generation network applications, the ES-3305P offers environmental efficiency. To comply with the IEEE802.3az standard, the ES-3305P provides power saving functionality to reduce energy consumption & save costs: Inactive Link Detection When a network device is shut down and/or an inactive link is detected, the power usage adjustment feature automatically reduces power usage. The switch’s power consumption will be dynamically adjusted according to the link status & the number of active network devices. Cable Length Detection Devices equipped with this feature automatically detect the length of connected Ethernet cables & adjust power usage accordingly. The shorter the cable length, the less power it consumes. Easy to Use The ES-3305P is plug-&-play & supports a wide range of network protocols. Installation & network management is quick & straightforward, & clear & convenient LED indicators display easy to read port & switch status. ...

Edimax ES-5500G 5-Port Gigabit Ethernet Switch ES-5500G is an ideal energy saving switch integrated with five 10/100/1000 Mbps Gigabit ports. It is designed to meet the demands of transferring large files across the network with fast speeds. The switch is capable of detecting the length of the Ethernet cable connected & automatically supply with the right amount of energy. It also reduces its power consumption if ports are idle. Key Features Complies with the IEEE 802.3, IEEE 802.3u & IEEE 802.3ab standards Smart Green Ethernet technology to reduce power consumption 30%~50% Supports Auto-MDI/MDI-X, full/half duplex modes & auto-negotiation Supports flow control, Non-blocking & Jumbo Frame SUPPORT WIRE-SPEED & FLOW CONTROL The ES-5500G complies with IEEE802.3, IEEE802.3u & IEEE802.3ab standards. The switch is using non-blocking switching architecture, featuring your network with full-wire speed connections. It accommodates with flow control for full duplex mode & back pressure for half-duplex mode which ensures reliable data transfer & helps to prevent data lost. Use ES-5500G to create a gigabit high-speeds network & benefit from its ultimate performance & reliability SUPPORT JUMBO FRAME In addition, the ES-5500G supports jumbo frame which means that you can extend the Ethernet frame size to maximum 9600 bytes to increase data rate. This cost-efficient switch is the best choice for Small office/ Home office SUPPORT AUTO-MDI/MDI-X Easy plug & play installation because ES-5500G supports auto-MDI/MDI-X. You can use either straight-through or cross-over Ethernet cable & combine 10, 100 & 1000 Mbps devices into ES-5500G. The switch will automatically detect the right cable & speed for your device Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...