The Power to Protect. Are you looking to protect your valuable Networking, IT or Telco infrastructure from damaging voltage surges? Need a low cost but effective solution for wide scale deployment that prohibits the usage of full scale UPS systems? The new Dynamode Surge Pro range of Voltage Surge protected Power Distribution Units (PDU) allow just that sort of protection for your equipment. Featuring the latest in Metal Oxide Varistor (MOV) technology, the Surge Pro will block any input voltage surges up to around 4 times the nominal input voltage, meaning your IT Networking Switches, Servers, NAS devices & PBX devices will run for longer & thus reduce system downtime. Coupled with a high-visibility, robust Neon Rocker Switch for precise control, together with spaced UK-type electrical sockets means this new range of Surge protected PDUs are ideal for both Data & Telco applications & means an increase in MTBF of your attached equipment, 24/7. ...

Looking for high-performance power distribution for your heavily loaded systems? The newly developed Dynamode 13A heavy-duty vertical PDU using the IEC-14 plug input connector which is ideal for many device requirements including server, network & other industrial-type equipment functions such as broadcast & HVAC applications. Combining a fully certified IEC-14 plug input combined with a compatible heavy load power flex means you can be assured this Dynamode PDU can work without problems, 24/7. Furthermore, incorporated onto the vertical form-factor are industry standard UK sockets, ideal for data, telco & broadcast equipment with the added benefit of integral electrical surge protection. Robust in design, with an integral neon illuminated rocker switch for assured functionality, the Dynamode PDU is designed to deliver maximum electrical power today & tomorrow. ...

Are you looking for an easy way to remove your Hot Swappable SATA interface Hard Drives from your Server in a safe & secure way? The new Dynamode HDDR-3.5S is a feature rich, low cost removable 3.5" SATA interface Caddie that comes in two parts. The Caddie cradle simply fits into any existing 5.25" drive bay & is connected to the Hard Disk interface & power supply the normal way. Insert your existing 3.5" SATA Hard Disk into the removable drawer & this simply slides into the 5.25" bay. It’s that simple! ...

Welcome to the next generation of Super Speed Data Transfer. Looking to move up & take advantage of up to ten times the speed of your existing USB2.0 devices? Want to add Super Speed peripherals but don’t have the necessary USB3.0 ports on your Computer? Introducing the new Dynamode USB (Universal Serial Bus)-2PCI-3.0 which is the latest in high-performance, fully certified Super Speed USB3.0 PCI Express Interface Cards allowing compatible USB3.0 devices to communicate at up to 5 Gbps, up to ten times the speed of existing USB2.0 devices! Using the latest NEC D70200 USB3.0 chipset, the Dynamode USB (Universal Serial Bus)-2PCI-3.0 incorporates two Super Speed USB3.0 Ports which of course are fully backward compatible with existing USB2.0 Devices & any USB2.0 cables you may have. Fully Plug n’ Play, the USB (Universal Serial Bus)-2PCI-3.0 is fully Windows Vista & Windows 7 compatible. Now there’s no easier & cost-effective way in moving up to the fast lane of Super Speed™ USB3.0 connectivity!

Specification Transfer interface USB3.0 Transfer rata 5 Gbps (MAX) Supports USB3.0 & USB2.0 Devices Work temperature -40 ~ 65&8451; Work humidity 8% ~ 90% Storage humidity 5% ~ 95% Operate system Windows 98/SE/ME/2000/XP/VISTA/ Windows 7 Compliant with PCI Express Base

Specification, Revision 1.1 Super Speed (5.0 Gbps) additional USB (Universal Serial Bus) 3.0 will offer a myriad of possibilities for applications requiring fast & high-capacity communication, while maintaining compatibility with USB (Universal Serial Bus) 2.0 Driver supported MS Windows 98SE/ME/2000/XP/ Server 2003/XP 64-bit/ Vista/ Win 7



...

Dynamode started its activity with the intent of producing & distributing innovative devices & data communication equipment for the computer industry. Since its inception the business choices that Dynamode has made, have allowed it to expand & have brought it to the point of being one of the leading companies on the world market in this field. PRODUCT

Features: 5 x 10/100/1000 Mbps Auto-negotiation Gigabit Ethernet ports; Auto MDI/MDI-X for each port; Support Full/ Half duplex transfer mode for 10/100 Mbps; Support Full duplex transfer mode for 1000 Mbps; Wire speed reception & transmission; Store-&-Forward switching method; Integrated address Look-Up Engine, supports 8K absolute MAC addresses; Supports 256K Bytes RAM for data buffering; Extensive front-panel diagnostic LEDs; IEEE 802.3x flow control for full-duplex; Back pressure flow control for half-duplex.

...

The Dynamode USB (Universal Serial Bus) (Universal Serial Bus) Network Adapter means that you can connect any 10 Mbps or 10 Mbps/100 Mbps network from a USB (Universal Serial Bus)-enabled PC, notebook or USB (Universal Serial Bus) HUB. Featuring easy plug-and play installation & with instant hardware recognition from Windows 98 & the "HOT Swap" feature from USB (Universal Serial Bus)

Specification, you can be hooked up to the network in no time at all. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

Do you have the latest Android Tablet, Smartphone or another Android device, but are frustrated by the lack of expandability options for it, such as the lack of USB (Universal Serial Bus) input or other peripheral options such as Card reader or memory stick input? Many Tablet manufacturers, such as Google & its Nexus range of Tablet computers do not feature Card reader functionality or other input ports because they have to keep costs to a minimum. This leads to frustration for users who may need to add, for example, to copy files to the device, add a mouse or keyboard, which of course greatly improves the functionality of all Tablets or Smartphones. The C USBF MI is a breed of totally compatible USB (Universal Serial Bus) OTG (on the go) cables which simply plugs into any vacant micro USB (Universal Serial Bus) port & adds an immediate USB2. 0 port, allowing connection of any compatible USB (Universal Serial Bus) devices, without the need for any messy driver installs! Add a totally new way to connect your existing USB (Universal Serial Bus) mice, keyboards, Card readers & most other USB (Universal Serial Bus) devices that you may have & gain a new experience for your Tablet or Smartphone. in an instant!. ...

The new USB (Universal Serial Bus)-CR-31 Mobile SIM & Memory Card Reader is just what you are looking for. Featuring a universal SIM Card slot to read & move data from the SIM Card, the USB (Universal Serial Bus)-CR-31 also features an integral Memory Card Reader/ Writer that reads up to 9 of the latest high-capacity formats including Micro SD, Mini SD as well as other legacy formats.

Specification USB (Universal Serial Bus) version 2.0 standard, backward compatible with USB (Universal Serial Bus) version 1.1 Data transfer rate: up to 480 Mbps Supports: Mini SD, Micro SD (T-Flash), SD, MMC, MMC PLus, RS-MMC (MMC Mobile), MMC Card 4.0, RS-MMC4.0, Sim Card Plug-&-Play & hot swapping USB (Universal Serial Bus) bus-powered

...

Dynamode SATA to e SATA USB (Universal Serial Bus) HDD Docking Station with One Touch Back-up Button. Technical

Specification

...

Features Super slim, anodised aluminium heatsink enclosure Supports SATA 2.5 inch Hard Disk High-speed USB2 Interface – up to 480 Mbps transfer Plug n’ Play & Hot Swappable Supports IDE 2.5 inch Hard Disk up to 80 Gb No Power Supply needed – supplied by USB (Universal Serial Bus) bus Status LED for Read/ Write operations High-speed USB (Universal Serial Bus) cable supplied Dimensions: 125 x 75 x 12mm, Weight: 60grams Install kit

Includes:: Carry Case, Screwdriver & fixings Compatible with Windows ME/2000/XP & MAC OS 8.6+

Specification Interfaces/ Ports SATA: Yes USB (Universal Serial Bus) 2.0: Yes Physical In The Box: 2.5 inch Disk Caddie • Carry Case • Screwdriver & fixings Dimensions: 12.5cm (W) x 7.5cm (D) x 1.2cm (H) Weight: 0.06kg Operating Systems Supported Microsoft Windows Me, 2000, XP Apple Mac OS (8.6+ or later)



...