The D-Link DUB-H4 2.0 is a Hi-Speed Universal Serial Bus 2.0 4-port hub with backward compatibility to USB (Universal Serial Bus) 1.0 & 1.1. It provides an out of the box industry standard that allows connection of up to four USB (Universal Serial Bus) peripherals or devices to your USB (Universal Serial Bus) ready PC or Mac. The D-Link DUB-H4 is targeted at PC & Mac users that are expanding the number of USB (Universal Serial Bus) ports on their system. The D-Link DUB-H4 2.0 is designed to provide quick & easy access to the four type "A" downstream ports for connecting USB (Universal Serial Bus) peripherals, devices or other USB (Universal Serial Bus) hubs. A single type "B" upstream port connects the DUB-H4 to the host computer, or another USB (Universal Serial Bus) hub enabling up to 127 devices to be connected by cascading multiple hubs. Configured directly by the operating system, the D-Link DUB-H4 2.0 operates seamlessly with both Microsoft Windows & Apple Macintosh Operating Systems. As a standard USB (Universal Serial Bus) hub, the D-Link DUB-H4 buffers USB (Universal Serial Bus) data from any attached peripheral in compliance with USB (Universal Serial Bus) specifications to provide an invisible extension of the USB (Universal Serial Bus) bus. Supporting both low speed (1.5 Mbps & 12 Mbps**) & Hi-speed (480 Mbps*) devices, each port creates a bridge between the peripheral & host computer. Diagnostic LED's located on the top of the device provide power state (self-power) & port status on each port. The DUB-H4 2.0 is packaged with all necessary documentation, a 6-foot hi-speed USB (Universal Serial Bus) 2.0 'A' to 'B' cable & an AC power supply to ensure that the user is able to easily & quickly install & use the device. * Maximum transfer rate based on USB (Universal Serial Bus) 2.0 specifications. Actual data throughput will vary. ** Maximum transfer rate based on USB (Universal Serial Bus) 1.1 specifications. Actual data throughput will vary. ...

Functions & Features Features Camera 1/3.2” 3-megapixel CMOS progressive sensor Fixed fisheye lens: 1.1 mm F2.0 Built-in microphone & speaker for 2-way communication ONVIF compliant Connections 10/100 Fast Ethernet port with Po E support micro SD card slot for onboard storage 2 Image & Video High resolution video & snapshots, up to 1920 x 1536 Distortion correction H.264 & Motion JPEG compression Desktop, Wall, & Ceiling mount display modes e PTZ viewing Simultaneous multi-stream support Supports multiple access lists Built-in Samba client for saving to a NAS Technical Specifications Camera Camera Hardware Profile 1/3.2” 3 megapixel progressive CMOS sensor 8 metre (25 feet) IR illumination distance Minimum illumination: Day Mode: 0.5 lux Night Mode (LEDs off): 0.25 lux Night Mode (LEDs on): 0 lux Built-in Infrared-Cut Removable (ICR) Filter module Focal length: 1.1 mm Aperture: F2.0 Angle of view: (H) 180° (V) 180° (D) 180° Angle of adjustment: (V) 15° Minimum object distance: 0.3 m Built-in microphone & speaker Image Features Configurable image size, quality, frame rate, & bit rate Time stamp & text overlays Flip & mirror Configurable motion detection windows Desktop, wall, & ceiling display modes Configurable shutter speed, brightness, saturation, contrast, & sharpness WDR 3D filter Display Modes Fisheye View Normal View Multi-View with Panorama Panoramic View Mixed View (with Fisheye) Multi View Video Compression Simultaneous H.264/MJPEG format compression H.264/MJPEG multicast streaming JPEG for still images Video Resolution 1920 x 1536, 1440 x 1152, 1280 x 1024, 960 x 768, 640 x 512 up to 25 fps 1 Audio Support G.711 AAC External Device Interfaces 10/100 BASE-TX Fast Ethernet port Supports 802.3af Po E (Class 2) micro SD/SDHC/SDXC card slot, accepts cards up to 128 GB2 Network Network Protocols IPv 4, IPv 6, ARP, TCP, UDP, ICMP DHCP client NTP client (D-Link) DNS client SMTP client DDNS client (D-Link) SMTP client FTP client HTTP server HTTPS for configuration Samba client PPPo E UPn P port forwarding RTP/RTSP/RTCP IP filtering Qo S/DSCP Co S Multicast SNMP IGMP ONVIF compliant Bonjour Security Administrator & user group protection Password authentication HTTP & RTSP digest encryption System Management System Requirements for Web Interface Browser: Internet Explorer, Firefox, or Safari Event Management Motion detection Event notification & uploading of snapshots/video clips via e-mail or FTP Take snapshots/video clips & save to integrated micro SD card slot Supports multiple SMTP & FTP servers Multiple event notifications Multiple recording methods for easy backup Remote Management Configuration interface accessible via web browser D-View Cam™ System Requirements Operating System: Microsoft Windows 10/8/7/ Vista Web Browser: Internet Explorer 7 or higher Protocol: Standard TCP/IP D-View Cam™ Software Functions Remote management/control of up to 32 cameras Viewing of up to 32 cameras on one screen Supports all management functions in web interface Scheduled motion triggered or manual recording options Physical Weight 210 g ± 5% External Power Adapter (not included) Input: 100 to 240 V AC, 50/60 Hz Output: 12 V DC, 1.5 A Power Consumption 4.6 watts max. Temperature Operating: 0 to 40 °C (32 to 104 °F) Storage: -20 to 70 °C (-4 to 158 °F) Humidity Operating: 20% to 80% non-condensing Storage: 5% to 95% non-condensing Certifications CE CE LVD FCC C-Tick

Dimensions & Phi;97 x 48.3mm Optional Mounting Brackets DCS-37-1 Wall type mount bracket DCS-37-2 Ceiling type mount bracket

...

Functions & Features Features 1080p Full HD Camera 1/3” 3-megapixel progressive CMOS sensor Fixed lens with focal length of 3.6 mm & F1.8 aperture Up to 1080p resolution at 30 fps H.264, MJPEG codec support for streaming & recording Outdoor placement Built-in IR LED illuminator providing up to 20 metres night vision Climate resilient & weatherproof Operates between -30 °C & 50 °C Protective bracket for cables IP66 certified housing Glare reducing sun shield Wide Dynamic Range image enhancement 3DNR reduces image noise in low-light environments Flexibility & Connectivity 10/100 Fast Ethernet port with Po E (Power over Ethernet) ensures easy integration into your network Technical Specifications Camera Camera Hardware Profile 1/3” 3 megapixel progressive CMOS sensor 20 metre IR illumination distance Minimum illumination: Day Mode: 0.2 lux Night Mode (LEDs off): 0.1 lux Night Mode (LEDs on): 0 lux Built-in Infrared-Cut Removable (ICR) Filter module 10x digital zoom Minimum object distance 0.5 m Focal length: 3.6 mm Aperture: F1.8 Angle of view: (H) 70° (V) 40° (D) 80° Camera Housing IP-66 compliant weatherproof housing Image Features Configurable image size, quality, frame rate, & bit rate Time stamp & text overlays Configurable motion detection windows Configurable privacy mask zones Configurable shutter speed, brightness, saturation, contrast, & sharpness WDR 3D filter Video Compression Simultaneous H.264/MJPEG format compression H.264/MJPEG multicast streaming JPEG for still images Video Resolution 16:9 1920 x 1080, 1280 x 720, 800 x 448, 640 x 360 up to 30 fps 4:3 2048 x 1536 up to 15 fps 1440 x 1080, 1280 x 960, 900 x 720, 800 x 592, 640 x 480 up to 30 fps External Device Interface 10/100 BASE-TX Fast Ethernet port Supports 802.3af Po E Network Network Protocols IPv 6 IPv 4 TCP/IP UDP ICMP DHCP client NTP client (D-Link) DNS client DDNS client (D-Link) SMTP client FTP client HTTP / HTTPS Samba client PPPo E UPn P port forwarding RTP / RTSP/ RTCP IP filtering Qo S Co S Multicast SNMP ONVIF compliant Security Administrator & user group protection Password authentication HTTP & RTSP authentication System Management System Requirements for Web Interface Browser: Internet Explorer, Firefox, Chrome, or Safari Event Management Motion detection Event notification & uploading of snapshots/video clips via e-mail or FTP Supports multiple SMTP & FTP servers Multiple event notifications Multiple recording methods for easy backup Remote Management Take snapshots/video clips & save to local hard drive Configuration interface accessible via web browser D-View Cam™ System Requirements Operating System: Microsoft Windows 10/8/7/ Vista Web Browser: Internet Explorer 7 or higher Protocol: Standard TCP/IP D-View Cam™ Software Functions Supports all management functions provided in web interface Scheduled motion triggered, or manual recording options Remote management/control of up to 32 cameras Viewing of up to 32 cameras on one screen General Weight 430 g ± 5 % External Power Adapter Input: 100 to 240 V AC, 50/60 Hz Output: 12 V DC 1.5 A Power Consumption 6.4 watts ± 5 % (Po E) Temperature Operating: -30 to 50 °C (-22 to 122 °F) Storage: -20 to 70° C (-4° to 158° F) Humidity Operating: 20 % to 80 % non-condensing Storage: 5 % to 95 % non-condensing Certifications CE CE LVD FCC C-Tick ...

- Product Description: D-Link Vigilance Starter kit
- DVR + camera (s)
- wired
- System: DVR + camera (s)
- wired
-




...

The DGS-1210 Series Gigabit Smart Managed Switches with Fibre Uplinks is the latest generation of D-Link Smart Managed Switches featuring high port density & optional Po E support. With D-Link Green 3.0 technology, the series offers a high level of energy saving & efficiency, as well as compliance with IEEE 802.3az Energy Efficient Ethernet standard. Energy saving DGS-1210 switch is capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switch offers advanced power-saving settings including port shutoff & standby, LED shutoff, & system hibernation based on custom scheduling profiles. The profiles can also be applied to the Po E switch so that there is no unnecessary power consumption during off hours. The DGS-1210 series switch can also detect the length of connected cables to automatically reduce power usage on shorter cable connections. Auto Surveillance VLAN & Voice VLAN The process of setting up IP surveillance & Vo IP on a network is automated with the D-Link Smart switch. Auto Surveillance VLAN (ASV) consolidates data & surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at their high levels. Similarly, the Auto Voice VLAN guarantees clear audio quality & efficient transmission for all voice communication. Exclusive Layer 2 features Equipped with a complete lineup of L2 features, the DGS-1210 series switch

Includes:: IGMP Snooping, Port Mirroring, Spanning Tree, & Link Aggregation Control Protocol (LACP). The IEEE 802.3x flow control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps full duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include loopback detection & cable diagnostics. Loopback detection is used to detect loops created by a specific port & automatically shut down the affected port. The cable diagnostic feature is designed primarily for administrators & customer service representatives, & can rapidly discover the type of error & determine the cable quality. Secure your network D-Links safeguard engine protects the switch against traffic flooding caused by virus attacks. The switch also supports 802.1x port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & protects the network by screening traffic from illegal MAC or IP addresses. ARP spoofing prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by man-in-the-middle attacks, & prevents wasting CPU cycles on these packets. For added security, the DHCP server screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

Performance without compromise The DGS-1210-10/10P/20/28 features a fanless design that allows for quieter operation & helps to extend the device’s lifetime. While the DGS-1210-28P/52/52P feature a smart fan design that powers on after the switch reaches a certain temperature, saving energy & cutting costs without sacrificing performance. Fibre Uplinks The Fibre Uplinks integrate advanced management as well as security functions that provide performance & scalability making it suitable for business use. Po E The DGS-1210 Series

Includes:: a range of high power budget Po E-enabled switches for businesses looking to power Vo IP phones, wireless access points or network cameras. Energy Saving Incorporating D-Link Green technology, the DGS-1210 Series switches are capable of power-saving without sacrificing operational performance or functionality. Taking the approach to green IT one step further this series incorporates a special chipset with advanced silicon technology for efficient use of energy. Features Green Technology Power saving via the following
Features: Link Status detection LED Shut-Off Port Shut-Off System Hibernation Time-based Po E (DGS-1210-10P/28P/52P/52MP only) Security Features Access Control List secures network D-Link Safeguard Engine protects CPU from Broadcast/ Multicast/ Unicast Flooding Port Security supports 64 MACs per port ARP Spoofing Prevention Intuitive Management D-Link Network Assistant Utility or Web-based GUI Built-in SNMP MIB for remote NMS (D-View 6.0) Compact CLI through Telnet Advanced Features Auto Surveillance VLAN Loopback Detection automatically disables a port when a loop is detected Cable Diagnostics allows administrators to determine cable status SFP ports for flexibility Auto MDI/MDIX Interface Number of 10/100/1000BASE-TX ports
- DGS-1210-10/10P
- 8 ports Number of SFP ports
- DGS-1210-10/10P
- 2 ports Po E Supported Models (Standard (s)/ Number of Ports/ Maximum Power Budget)
- DGS-1210-10P (802.3af/802.3at/8 ports/78W) Performance Switch Capacity
- DGS-1210-10/10P
- 20 Gbps 64-Byte Packet Forwarding Rate
- DGS-1210-10/10P
- 14.88 Mpps MAC Address Table Size
- 16K Packet Buffer
- DGS-1210-10P
- 1 MB per device Jumbo Frame
- Up to 9, 216 Bytes Physical & Environmental Power Consumption (Standby/ Maximum)
- DGS-1210-10P
- 17.9W / 103.4W (Po E on) Power Input
- 10 to 240 VAC, 50/60HZ internal universal power supply

Dimensions (W x D x H)
- DGS-1210-10P
- 330 x 180 x 44 mm Weight
- DGS-1210-10P
- 1.86 kg Ventilation
- DGS-1210-10P
- fanless Heat Dissipation
- DGS-1210-10P
- 330.96 BTU per hour Temperature Operating: -5° to 50°C (23° to 112°F) Storage: -20° to 70°C (-4° to 158°F ) Humidity Operating: 0% ~ 95% non-condensing Storage: 0% ~ 95% non-condensing Certification
- CE Class A, VCCI Class A, FCC Class A, c UL, CE (LVD), BSMI, CCC, C-Tick





























...

The DGS-1210-10/10P/20/28 features a fanless design that allows for quieter operation & helps to extend the device's lifetime. While the DGS-1210-28P/52/52P feature a smart fan design that powers on after the switch reaches a certain temperature, saving energy & cutting costs without sacrificing performance. ...

The DGS-1210 series Smart switch features D-Link Green 3.0 technology. The series offers a high level of energy saving & efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv 6 management & configurations ensures your network remains protected after the upgrade from IPv 4 to IPv 6. By offering multiple management options, the Smart switch allows quick deployment, infrastructure expansion, & seamless function upgrades. Built for small & medium-sized businesses, the DGS-1210 series Smart switch provides functionality, security, & manageability for a fraction of the standard cost of ownership. The DGS-1210-24P is a 24-port Smart Po E switch that provides 12 Po E-enabled ports that can support up to 30 W of power output following IEEE 802.3at standard. ...

The DGS-1210-10/10P/20/28 features a fanless design that allows for quieter operation & helps to extend the devices lifetime. While the DGS-1210-28P/52/52P feature a smart fan design that powers on after the switch reaches a certain temperature, saving energy & cutting costs without sacrificing performance. Discovery & notification D-Link Insight will track all the devices connected to the smart switch & list them by MAC, IP & switch port. Insight also provides alerts to notify you when more devices are found on the network. Each client devices operating system can also be fingerprinted. Configuration management Simple, automated configuration management creates a backup of the switch settings for easy restore. Return to the last known state or bring a device online without cumbersome configuration. Alerts Always know the status of your network through Insight alerting. Should one of your web smart switches go offline or reboot, youre immediately notified. No more guessing or waiting for an outage report. Configure smart list alerts to inform you when unexpected computers are discovered on the network. Active compliance monitoring with insight plus Windows & Mac OS clients are screened by D-Link Insight Plus, which acts as an active security sentry to validate compliance to policies on a clients operating system patch level, firewall, antivirus & anti-spyware. Reports & alerts provide you with the data you need to properly determine status & access privileges. ...

The DGS-1210 Series Gigabit Smart+ Switches with Fibre Uplinks is the latest generation of D-Link smart switches featuring D-Link Green 3.0 technology. The series offers a high level of energy saving & efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. IPv 6 Ready Logo Program Approved, support for IPv 6 management & configurations ensures your network remains protected after the upgrade from IPv 4 to IPv 6. By offering multiple management options, the Smart+ Switches allows quick deployment, infrastructure expansion, & seamless function upgrades. Built for small & medium-sized businesses, the DGS-1210 Series Smart+ Switches provide functionality, security, & manageability for a fraction of the standard cost of ownership. The DGS-1210 Series Gigabit Smart+ Switches with Fibre Uplinks

Includes:: a range of high power budget Po E-enable switches for businesses looking to power Vo IP phones, wireless access points or network cameras. The DGS-1210-10P is a 8-port Smart Po E+ Switch that provides 8 Po E-enabled ports that can supply power of up to 30 W each. Whereas the DGS-1210-28P is a Smart Po E+ Switch with a power budget of 187 W, that provides 24 Po E-enabled ports with ports 1-4 supporting up to 30 W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs. Easy Management The D-Link Gigabit Smart+ Switches with Fibre Uplinks is designed for easy management. All configurations can be made through a Web interface regardless of the host PC’s operating system. Furthermore, the web UI contains ten language options to make operations more straightforward. During the first installation, the Smart Console Utility will automatically discover all D-Link Smart+ Switches in the network, allowing administrators to assign IP addresses & the subnet mask quickly. It also allows simultaneous firmware upgrades to multiple switches, saving a great deal of time. The Smart Console Utility’s important management commands, such as downloading firmware or a configuration file, offer a sophisticated method of batch operations for multiple switches. Energy Saving DGS-1210 Series Gigabit Smart+ Switches with Fibre Uplinks are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 Series Smart+ Switches offer advanced power-saving settings including port shutoff & standby, LED shutoff, & system hibernation based on custom scheduling profiles. The profiles can also be applied to the Po E switch so that there is no unnecessary power consumption during off hours. The DGS-1210 Series switches can also detect the length of connected cables to automatically reduce power usage on shorter cable connections. Auto Surveillance VLAN & Voice VLAN The process of setting up IP surveillance & Vo IP on a network is automated with the D-Link Smart+ Switches. Auto Surveillance VLAN (ASV) consolidates data & surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at their highest levels. Similarly, the Auto Voice VLAN guarantees clear audio quality & efficient transmission for all voice communication. Exclusive Layer 2 Features Equipped with a complete line-up of L2 features, the DGS-1210 Series switches include IGMP Snooping, Port Mirroring, Spanning Tree, & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. The Cable Diagnostic feature is designed primarily for administrators & customer service representatives, & can rapidly discover the type of error & determine the cable quality. Secure your Network D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & protects the network by screening traffic from illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by Man-in-the-Middle attacks, & prevents wasting CPU cycles on these packets. For added security, the DHCP Server Screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment.

...