Product Details D-Link, an industry leader in networking, introduces the DWL-P200 Power over Ethernet (Po E) Adapter. The DWL-P200 delivers both data & electrical power to Ethernet-enabled devices using a single Ethernet cable. Using Power over Ethernet, you eliminate the need to place an Ethernet-enabled device, such as a wireless access point, near a power outlet, giving you more freedom in placement. The DWL-P200 Power over Ethernet (Po E) Adapter is simple to install, requiring no tools & no software. Its compact size makes implementation of the DWL-P200 easy. Plug the base unit into a power outlet, & then connect the terminal unit to your network device using any standard Ethernet cable. Once set up, the terminal device unit can output power to any compatible 5V or 12V Ethernet-enabled device. The DWL-P200 simplifies your installation of Ethernet-enabled devices, such as an Internet camera or wireless access points, by allowing you to place it beyond the range of standard power outlets. You can now mount these devices to a ceiling or outside without placing them near a power supply. With the DWL-P200 Power over Ethernet (Po E) Adapter, both power & data can be transmitted up to 328 feet (100m) using standard Ethernet cabling with virtually no reduction in data throughput. Use the DWL-P200 with Ethernet-enabled devices where power outlets are not readily available. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The D-Link DHP-500AV Power Line AV 500 Adapter turns every power socket into a possible wired network connection, by extending your existing network using the electrical wiring in your home. The DHP-500AV plugs directly into a power outlet (outlets & electrical wiring must all be part of the same electrical system; at least one additional Power Line AV 500 Adapter is required to create a network), & does not require any additional cables, so you can extend your home network by connecting multiple devices in the farthest corners of your home. For convenient setup, an encryption key can be quickly configured at the push of a button on the device, to protect the network from unauthorized wire tapping. With hassle-free plug & play installation, the DHP-500AV is an ideal solution to create a wall-to-wall home network. The DHP-500AV is capable of delivering wired data transfer rates of up to 500 Mbps. Advanced technology built into this device makes it more resistant to electrical interference from other household appliances, so users can fully benefit from maximum transmission speeds. This makes it absolutely ideal for bandwidth-intensive applications, guaranteeing smooth HD video streaming, Vo IP calls, & lag-free online gaming experiences. In addition, its Quality of Service (Qo S) Engine prioritizes Internet traffic, ensuring that multimedia applications do not experience glitches while web surfing & downloads are in progress. This device provides ample network bandwidth, enabling Digital Home consumers to tap into existing electrical wiring for high-quality multimedia streaming. Based on the industry-leading Power Line Alliance technology, the DHP-500AV is compatible with other brands devices based on the IEEE 1901 standard. It is also compatible with devices implementing the former Power Line AV standard, such as D-Links DHP-306AV/-307AV, DHP-P306AV/-P307AV, & DHP-W306AV/-W307AV. The DHP-500AV is part of D-Link Green, D-Links program for providing eco-friendly alternatives without compromising performance: if data transmission does not occur over a certain period of time, the extender will automatically go into sleep mode to save power. ...

The D-Link DHP-P500AV Power Line AV 500 Passthrough Adapter turns every power socket into a possible wired network connection, by extending your existing network using the electrical wiring in your home. This adapter uses the latest Power Line technology to transmit data at speeds of up to 500 Mbps, allowing you to stream media content, game & browse the web simultaneously, & flawlessly. Convenient & secure setup The DHP-P500AV plugs directly into a power outlet, so you can extend your home network by plugging one adapter into your router, & another adapter into the room you want to extend your connection to. For convenient setup, an encryption key can be quickly configured at the push of a button on the device, to protect the network from any intruders. With hassle-free plug & play installation, the DHP-P500AV is an ideal solution for creating a wall-to-wall home network. Ideal for bandwidth-intensive applications This adapter is capable of delivering wired data transfer rates of up to 500 Mbps. Advanced technology built into this device makes it more resistant to electrical interference from other household appliances, so users can fully benefit from the maximum transmission speeds. This makes it absolutely ideal for bandwidth-intensive applications, guaranteeing smooth HD video streaming, Vo IP calls, & lag-free gaming even if everyone is online at the same time. In addition, its Quality of Service (Qo S) Engine prioritises Internet traffic, ensuring that multimedia applications do not experience glitches while web surfing & downloads are in progress. Compatibility Based on the industry-leading Power Line Alliance technology, the DHP-P500AV is compatible with other brands’ devices based on the IEEE 1901 standard. It is also compatible with devices implementing the former Power Line AV standard, such as D-Link’s DHP-306AV/-307AV, DHP P306AV/ -P307AV, & DHP-W306AV/-W307AV. D-Link Green The DHP-P500AV is part of D-Link Green, D-Link’s program for providing eco-friendly alternatives without compromising performance: if data transmission does not occur over a certain period of time, the adapter will automatically go into sleep mode to save power. ...

. rpd-row { overflow: hidden; padding: 30px 0; border-bottom: 1px solid eee; }. rpd-row img { max-
Width: 100%; }. rpd-left
...

The dlinkgo GO-PLK-200 Power Line AV Mini Easy Starter Kit is an entry level Power Line starter kit featuring two GO-PL-200 Power Line AV Mini Easy Adapters. These adapters are compliant with the Home Plug AV standard, using your home existing electrical wiring to create a network or extend your existing network 1. Each adapter turns any power outlet into a network access point, letting you connect digital media devices, game consoles, print servers, computers, & network storage devices throughout your home, without the need for installing wiring. Convenient Setup & Secure Operation The Power Line AV Mini Easy Starter Kit adapters plug directly into a power outlet, & do not require any additional cables, meaning that any power outlet in your home can be turned into a network connection instantly. Extend your home network by connecting multiple devices in the farthest corners of your home. Share the Internet connection from your study with the media center in your living room, or connect computers in different rooms to share files, all without installing new cabling. For convenient setup, an encryption key can be quickly configured with the push of a button. The adapters implement 128-bit AES data encryption to protect the network from unauthorized wire-tapping & keep your network activity safe from intruders. High-speed Data Transmission Over Existing Wiring The GO-PLK-200™ adapters feature Home Plug AV technology, enabling them to deliver data at speeds up to 200 Mbps, providing ample bandwidth for today demanding multimedia applications. Create a network capable of Internet surfing & file sharing, all using your home existing electrical wiring. Saves Power Automatically The GO-PLK-200™ incorporates a power-saving mode to reduce energy consumption when the network is not is use. If no data transmission or reception occurs over a certain period of time, the adapters will automatically go into sleep mode, reducing power usage by more than 70%, & allowing you to save energy automatically, without sacrificing performance. Compact & Subtle Design Thanks to the GO-PLK-200™ small form factor, your network can easily blend into your home decor, meaning you can place the adapters throughout your home without making your network equipment obvious. The stylish white exterior makes them discreet, & the small size means that they will not obstruct neighbouring power outlets. ...

The D-Link DKVM-4U KVM switch means that you can control up to 4 PCs using only one monitor, keyboard & mouse. The monitor & the two input devices are connected directly to this KVM switch & not to the client computers. The DKVM-4U is also a cost effective solution for control of several servers in a computer room, allowing an engineer to handily manipulate all connected computers from a single monitor, keyboard & mouse. Each KVM cable set

Includes:: a video cable for PC's VGA connector, & a single USB (Universal Serial Bus) 2.0 cable for the PC's USB (Universal Serial Bus) port. From the KVM switch box, you can connect to 2 USB (Universal Serial Bus) devices: a USB (Universal Serial Bus) keyboard & a USB (Universal Serial Bus) mouse. 2 sets of KVM cables are provided for ready connection to 2 computers, the remaining KVM cables are optional. You can switch quickly between the individual client computers by pushing a button on the DKVM-4U or by pressing the hot keys on your keyboard. The KVM switch confirms the switchover with an acoustic signal, & has LEDs indicating which PC is currently being served by the console. All connected PCs are automatically scanned every 10 seconds, so your monitor, keyboard & mouse are updated whenever you switch to a selected PC. CAPS LOCK, NUM LOCK & SCROLL LOCK key's status for each computer is automatically recalled. The DKVM-4U guarantees that the client PC does not crash when it is disconnected from KVM switch box. The DKVM-4U is capable of supporting the most demanding resolutions (VGA, SVGA & Multisync monitors) of up to 2048 x 1536 at 75 Hz refresh rate (bandwidth up to 400 M Hz) without any noticeable degradation in image quality.

...

The D-Link Range Booster N Desktop Adapter (DWA-547) is a draft 802.11n client device that delivers unrivaled wireless performance for your desktop computer. With this adapter, you can easily upgrade your desktop computer’s wireless connectivity. Once connected, access your network’s high-speed Internet connection while sharing photos, files, music, video, printers, & storage. Get a better Internet experience with a faster wireless connection so you can enjoy smooth digital phone calls, gaming, downloading, & video streaming. ...

This RPS is equipped with an integrated detection circuit that continuously monitors the switching devices internal power supply. In the event of a power interruption, the redundant power supply is immediately triggered so that the LAN switch & its connected devices can continue providing service. This results in a more reliable network infrastructure & protects the network from a single failure of a network device power supply. It is suitable for DGS-3427, DGS-3450, DGS-3300 Series, DXS-3300 Series, DGS-3600 Series, DGS-3048, DGS-3100-48. ...

Sony Super HAD-II 14;” CCD sensor for superior image quality 12x optical zoom 12x digital zoom Motorised pan & tilt with proportional speed adjustment Built-in IR-Cut Removable (ICR) filter, for enhanced colour rendering in the day & good results in low light conditions Wide Dynamic Range (WDR) technology, for clear images in strong backlight Software-based motion detection Intuitive web interface with advanced functions Digital I/ Os for sensor input & alarm output Simultaneous streaming in H.264, MPEG-4 or MJPEG compression D-View Cam monitoring software included (support for up to 32 cameras) Onvif compliant 24/7 Camera Surveillance D-Link’s DCS-6616 12X Speed Dome IP Camera is a PTZ surveillance solution that can cover large areas & low-light environments. Built with a Sony Super HAD-II 1/4” CCD sensor, the DCS&8209;6616 can capture 650 TVL high-resolution video with excellent image quality. A built-in IR-cut removable filter allows the camera to capture video in both bright & dark environments. During the day, the IR-cut filter moves out of the way to provide high-quality images. At night, the IR-cut filter stays in, allowing the camera to use all available light for low-light surveillance. Versatile Pan/ Tilt/ Zoom (PTZ) Functionality The DCS-6616 is built with an extensive set of PTZ features that allow large areas to be monitored easily. Endless 360° panning allows the camera to sweep an area easily, & 12X optical zoom with auto focus provides the ability to zoom in & focus on an event for more detail. Panning speed is variable & proportional to the zoom ratio for precise control over camera movement. The DCS-6616 can also be set to follow preset sequence paths at set speeds for customised automatic surveillance. Flexible Connectivity The DCS-6616

Includes:: input & output ports that allow connectivity to external devices such as IR sensors, switches, & alarm relays. It

Includes:: audio input & output ports, & a video output for direct connection to a TV for live monitoring. Wide Dynamic Range (WDR) Applications The Wide Dynamic Range (WDR) function provides clear images even under backlit conditions where the intensity of illumination can vary significantly, making the DCS-6616 perfect for extreme high-contrast environments. For example, when placed indoors, the DCS-6616 will adjust itself to the intense sunlight that may be streaming in through a nearby window. This makes it an ideal solution for security applications. Multiple Video Streams The DCS-6616 supports simultaneous streaming of H.264, MPEG-4, & MJPEG video to provide both high-quality & bandwidth-efficient compression formats. MJPEG delivers excellent file integrity, & is ideal for situations which require high image detail. H.264 & MPEG-4 produce a small file size, useful for extended recording or for use in low-bandwidth networks. in addition, the DCS-6616 supports multicast H.264 & MPEG-4 streaming, allowing users to view the camera feed by subscribing to a multicast IP address on the network 3GPP Mobile Surveillance Support for 3GPP Mobile Surveillance allows users to view a live video feed from a 3GPP compatible Internet-ready mobile device. This extends monitoring capability, allowing users to check the camera’s video feed while on the go without a computer. D-View Cam™ for Management The included D-Link D-View Cam™ is sophisticated software which allows users to manage up to 32 network cameras, set e-mail alert notifications, create recording schedules, & use motion detection to record directly important events to a hard drive. D-View Cam™ also allows users to upload a floor plan to create a realistic layout of the premises where cameras are located, further simplifying the management process. Open Network Video Interface Forum (ONVIF) compliant The Open Network Video Interface Forum (ONVIF) is standards relating to open IP video networking. The DCS-6616 is ONVIF compliant & therefore interoperable with other manufacturer’s products on the same network such as cameras, storage systems, video analytics products & Video Management Systems.



...

The DCS-3710 Megapixel Day & Night WDR Network Camera is a high-end professional IP surveillance solution suitable for locations requiring uncompromising security. WDR & ICR technologies ensure that the images captured by day or night are clear & sharp. High resolution surveillance The camera employs a 1/3” Megapixel progressive CMOS sensor with low Lux sensitivity to deliver a truly superior image quality. It also features a high-end vari-focal auto iris Megapixel lens by Computar, maintaining high contrast, brightness & sharpness across the entire image plane, especially in the corners of the image. Day & night operation A built-in Infrared Cut Removable (ICR) filter can be manually applied via the web GUI, or set to automatically adjust according to lighting conditions. This feature enables the camera to capture crisp colour images during the daytime, & grayscale images in low-light. In addition, the camera

Includes:: Wide Dynamic Range (WDR) technology, which provides clear images with a good level of detail even when the camera is hit with strong backlight, for example when facing intense sunlight that may be streaming in through a nearby window. Multiple video streams Up to 3 video profiles may be configured with different settings for simultaneous operation. The DCS-3710 supports two modes of video compression, MPEG-4 & MJPEG. The latter delivers excellent file integrity, providing a high-quality option, while the former is more bandwidth-efficient with small file sizes, ideal for extended recording or mobile viewing. in addition, the DCS-3710 supports multicast MPEG-4 streaming allowing users to view contact by subscribing to a multicast IP address on the network. You can enable streaming over the HTTPS protocol for a more secure viewing. Recording & storage The DCS-3710 incorporates an SD card slot for local storage, allowing up to 3 days video data 1, 2. With the built-in Samba client, software is not required to record the action directly on to a network storage device. Alternatively, you can record videos to a Network Video Recorder (NVR), such as the D-Link DNS-722-4 or DNS-726-4. These devices can control multiple cameras & support RAID-1 for backup of the video footage. A versatile solution You can also build a complete security system around the camera, by connecting it to I/O sensors & alarms & set up the system to send automated e-mail notifications for unusual events. Other interfaces include RS-485, for connection to an optional pan/tilt enclosure, effectively adding pan/tilt functionality to the DCS-3710, & a 12V DC power output for an optional LED illuminator. Easy to set up with wired Po E access The DCS-3710 complies with the IEEE 802.3af Power Over Ethernet (Po E)

Specification. This allows the camera to be powered directly from a Po E Ethernet switch, giving you the freedom to place the camera anywhere you need, including high walls & covert locations. Remote monitoring With the D-View Cam software included, up to 32 cameras may be centrally managed on a single computer screen. The DCS-3710 also features 3G mobile video support, enabling you to view a live video feed from the camera on a compatible 3G mobile phone or PDA anywhere in your 3G coverage area. 1/3” Megapixel WDR Progressive Scan CMOS sensor Wide Dynamic Range (WDR) technology, for clear images in strong backlight Megapixel vari-focal auto iris lens Built-in IR-Cut Removable (ICR) filter, for enhanced colour rendering in the day & good results in low light conditions Built-in 802.3af Power over Ethernet (Po E) for flexible placement 3G mobile video, for live video streams on a 3G mobile phone or PDA Simultaneous Motion JPEG & MPEG-4 streaming Supports 2-way audio* Digital I/O for connection to sensors & alarms RS-485 port for connection to an external Pan/ Tilt device Supports HTTPS streaming Lowest power consumption in its class SD card slot accepting both SD 1.1 & SDHC 2.0 storage cards Direct recording to a NAS box or Network Video Recorder Free D-View Cam software included



...