24-Port Layer 2+ Gigabit Wireless Switch with 802.3af Po ED-Link’s DWS-3024 is a Gigabit wireless switch designed for wireless network deployments in business environments. With this device, organisations can install high-performance, secure, manageable & scalable unified wired/wireless LAN switching. With combo SFP, Power over Ethernet (Po E) & redundant power supply (RPS) support, this Gigabit wireless switch provides enterprises with a easy way of upgrading to next-generation 802.11n wireless LAN. With the ability to deploy wireless devices regardless of physical locations & centralised management, upgrading is made easy. Centralised Wireless Network The DWS-3024 Gigabit Wireless Switch consolidates the security, manages the bandwidth & maintains the intelligence of the entire wireless network. Profiles including SSID, Qo S settings & encryption keys are only configured once & then applied to the managed APs. In addition, virtual SSIDs can be linked to VLANs, providing wireless traffic segmentation & load balancing can be achieved by configuring thresholds on each radio. Flexible Deployment The DWS-3024 offers a complete set of management features, so it can be used as an edge switch that unifies both wired & wireless traffic. The other way to deploy the switch is at the network core, in an overlay wireless network where traffic is tunneled to the switch for centralised data forwarding decisions. High Performance, Easy Deployment Designed for distributed deployments in the wiring closet, the wireless switch can support up to 48 wireless APs. They can either be directly connected to the wireless switch ports, or indirectly connected through a LAN switch. In deployments with large numbers of APs, up to 4 switches can exist in a peer group, to allow roaming between APs managed by different switches. With 802.3af Po E integrated into every switch port, the APs may be located away from power sources. With Gigabit connectivity, an investment is future-proofed as the network is prepared for next-generation 802.11n wireless devices. Dynamic RF & Power Management Managed APs can be configured to periodically leave their operational channel & scan other channels within the frequency range, allowing the wireless switch to build a complete RF map & dynamically assign the operating channel on each AP. In addition, the output power can be tuned to minimize interference. Operating channels & output power are automatically adjusted on any new event in the system, such as an AP being added or being removed. The switch can also be programmed to automatically readjust channels & power at regular intervals (eg every 6 hours) or at set times (eg 2:00am each day). Authentication & Security The DWS-3024 provides user-based services such as virtual private group (SSID) membership, encryption type, authentication, location tracking & associated network statistics. All deployed DWS-3024 share information about wireless clients associated with the APs, ensuring roaming users do not need to re-authenticate when hopping from one AP to the next. In addition to checking the identity of a connecting user from the switch’s local database, user authentication policies can be forwarded to an external RADIUS server for complete verification. This offloading capability ensures that the wireless switch will not overload when clients are simultaneously connecting to the network. APs themselves must authenticate with the wireless switch: failure to do so results in the AP being classified as “ Rogue”. Simplified Configuration & Deployment Through a centralised management platform, network maintenance & configuration become a more efficient process. If any access point were to fail, administrators can instantly identify the location of the failed AP & immediately swap it out with another AP. The DWS-3024 automatically configures the new AP with the same settings as the previous unit. Maximum Performance In addition to performing enhanced Layer 2+ forwarding, the DWS-3024 also provides Layer 3/4 & identity-tracking capabilities. Through centralized RF policies, auto-selection of the least utilised channels & AP load balancing, the switch can effectively manage the wireless bandwidth to optimise WLAN traffic. Fast roaming can take place, not only across different APs but also across logical IP subnets, ideal for guaranteeing seamless connectivity in Voice over WLAN deployments. The switch also offers resilient functions such as redundant load-sharing Gigabit links, 802.1Q VLAN traffic segmentation & IGMP snooping vital to supporting IP multicast streams. Maximum Network Protection Each client connecting to the wireless network goes through a strict authentication process to ensure maximum security. Whether the client is an assigned user, visiting guest or just has department access, the DWS-3024 protects the entire network infrastructure with its vast array of security protocols, including WPA/WPA2, 802.1X user authentication, & 802.11i standard security. Please note: networking & wireless components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

D-Links DWS-3024L L2+ Unified Wired/ Wireless Gigabit Switch is optimized for wireless network deployment in business environments. With this device, business can install high performance, secure, manageable & scalable unified wired/wireless LAN switching. Equipped with combo SFP, Power over Ethernet & redundant power supply (RPS) support, this switch provide enterprises with easy upgrade to next-generation 802.11n wireless LAN, simple deployment of wireless devices regardless of physical locations, & centralized management/policy enforcement of wireless mobility. Please note: networking & wireless components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The DWS-3160 is D-Link’s latest Unified L2+ Gigabit Wired/ Wireless Switch. Designed to be the ideal mobility solution for medium-sized & large enterprises & service providers, the DWS-3160 empowers administrators to exercise total control over their wireless networks by centralising all aspects of provisioning & management. Able to manage up to 48 D-Link Unified Access Points by itself & up to 192 in a switch cluster, the DWS-3160 can be configured to act either as a Wireless Controller in the core network, or as an L2+ Gigabit Switch at the edge, enabling it to be seamlessly integrated into any existing network infrastructure. ...

- Product Description: D-Link DXE-820T
- network adapter
- Device Type: Network adapter
- Form Factor: Plug-in card
-



...

The DXS-1100-10TS 10-Port 10 Gigabit Ethernet Smart Switch provides an entry-level solution for Small & Medium Businesses wishing to deploy 10 Gb Ethernet. 8 x 10 GBase-T ports instantly increases network bandwidth over standard Cat 6a cabling without the need to overhaul existing network infrastructure wiring. 2 x 10 Gigabit SFP+ fiber ports provide additional network connection flexibility. ...

- Product Description: D-Link DXS-1210-10TS
- switch
- 8 ports
- Managed
- rack-mountable
- Device Type: Switch
-





...

The D-Link DXS-1210 10 Gigabit Ethernet smart managed switch is a cost-effective 10 Gigabit switch, capable of servicing a range of network needs in any business. Supporting 10 G Base-T/SFP+ combo ports, this series provides connection flexibility across a network, allowing easier network integration. With high performance & low latency, the DXS-1210 fulfils the needs for virtualization, cloud services, and server-to-server applications, making it perfect for small-to-medium-business (SMB) customers. ...

D-Link DXS-1210-28S 4 Ports Manageable Ethernet Switch
- 3 Layer Supported
- Modular
- Optical Fiber, Twisted Pair
-



...

D-Link DXS-1210-28T 24 Ports Manageable Ethernet Switch
- 3 Layer Supported
- Modular
- Optical Fiber, Twisted Pair
-



...

The DXS-3400 Series switches feature a modular fan & power supply design for a high availability architecture. The hot-swappable design means that fans & power supplies can be replaced without affecting switch operation. Physical & virtual switch stacking allow the switches to be managed from a single IP address & provide redundancy for connected devices. The Switch Resource Management (SRM) feature allows the hardware table size to be changed, so that switch functions can be optimized based on the use of the switch. The DXS-3400 Series switches come with 3 modes;IP Mode, LAN Mode & L2 VPN Mode, which modify the size of the Layer 2 & 3 tables for optimum efficiency. The DXS-3400 Series switches include feature rich software which satisfies the needs of Small Medium Business, Small Medium Enterprise, and campus users. It supports a wide range of Layer 2 & 3 functions such as VLANs, inter-VLAN routing, multicasting, Quality of Service (Qo S), Virtual Router Redundancy Protocol (VRRP), Routing Information Protocol (RIP) v 1/2, Next Generation RIP (RIPng), Policy-Based Routing (PBR), and security features. The DXS-3400 Series also

Includes:: an easy-to-use web interface & an industry standard CLI for enhanced management.

...