The DWL-6600AP Unified N Dual-band Po E Access Point is a best-in-class indoor access point designed specifically for business-class environments. With high data transmission speeds & access point load balancing, the DWL-6600AP offers high-quality & reliable wireless service. Versatile & powerful, the DWL-6600AP can be flexibly deployed as a standalone wireless access point or as a managed access point controlled by a D-Link Unified Wireless Switch or Wireless Controller. Businesses can start with standalone mode deployment, then migrate to a centrally managed system anytime later. The DWL-6600AP delivers reliable wireless performance with maximum wireless signal rates of up to 300 Mbps in either the 2.4 GHz or 5 GHz mode. Support for Wi-Fi Multimedia™ (WMM) Quality of Service features makes the DWL-6600AP an ideal access point for audio, video, & voice application. In addition, the load balancing feature ensures maximum performance & best service quality in the wireless environment. Ideal for Business Blazing wireless performance of up to 300 Mbps network throughput Self-configuring cluster enables effortless provisioning Up to 32 virtual access points may be created from a single device Automatic load-balancing among neighboring access points Flexible Qo S with WMM ...

The DWL-6610APE Wireless AC1200 Dual-Band Unified Access Point is designed for small to medium businesses & enterprises, providing unparalleled bandwidth & flexibility for medium to large scale Wi-Fi networks. Featuring the latest 802.11ac technology on its 5 GHz b&, the DWL-6610APE means that you can deploy more devices & provide greater throughput for your wireless clients. The DWL-6610APE provides unparalleled connectivity by using a 2 x 2 antenna implementation, allowing high combined data rates of 1167 Mbps (867 Mbps 2 for 802.11ac, and 300 Mbps 2 for 802.11n) over the air. With 802.11n/ac technology, the DWL-6610APE provides high-performance connections over two bands, so wireless clients can stream media faster & farther than before using existing devices. When working in conjunction with D-Link Unified Controllers, the DWL-6610APE can be centrally managed. This allows for a large number of APs to be deployed & managed easily & efficiently. Once the APs are discovered by the controller, the administrator can push configuration to them as a group, instead of doing so individually. in addition, Radio Frequency (RF) resource management allows wireless coverage to be managed centrally, proving the best coverage possible for wireless clients. ...

Wave 2 has landed. Connect to more. Unparalleled performance makes the DWL&8209;6620APS Wireless AC1300 Wave 2 Unified Access Point a must&8209;have upgrade that allows your wireless customers in high&8209;density areas to reliably connect to more, with faster throughput & flexibility. Perfect for medium to large&8209;scale Wi&8209; Fi networks. Smart Antenna Technology D&8209; Link’s Smart Antenna technology processes algorithms used to identify spatial signal signatures such as Direction Of Arrival, & uses them to calculate beamforming vectors which are then used to target the wireless client & achieve the best possible throughput. The fast channel selection feature scans all channels & rapidly selects the one with the least interference. & the Null Steering capability curtails the power in the direction of interference to mitigate its influence. With these capabilities the D-Link Smart Antenna strengthens the connection reliability in real-time & delivers an optimised wireless user experience. Greater Speed & Connectivity It provides unparalleled connectivity by using the 802.11ac Wave 2 standard. High combined data rates of 1267 Mbps (867 Mbps for 802.11ac & 400 Mbps for 802.11n) can be delivered over the air & Wi-Fi Multimedia (WMM) together with 802.1p Quality of Service (Qo S) can give time-sensitive traffic like Voice over IP (Vo IP) or video streaming a higher priority ahead of other traffic. Efficiency multiplied Support for 802.11ac Wave 2 MU-MIMO technology enables the access point to communicate with multiple clients simultaneously, resulting in significantly enhanced network capacity & throughput. Dual&8209; Band Wireless for efficient performance The 2.4 GHz & high-speed 5 GHz AC channels & band steering technology makes your business network flexible by automatically placing clients on the optimal band for their needs like casual web browsing, & data-hungry operations like video streams & large file transfers. Airtime fairness ensures that equal airtime is given to each client, providing enhanced performance even when slower devices are connected. ...

General
- Device Type: Radio access point
-

Width: 28cm
-

Depth: 11.5cm






...

The DWL-8610AP Wireless AC1750 Dual-Band Unified Access Point combines the cutting-edge wireless speeds of 802.11ac with the unparalleled flexibility & scalability of D-Link’s Unified Wireless Solution. The DWL-8610 is designed to support small to medium business or enterprise environments by providing network administrators with secure & manageable dual-band wireless network options. Super-fast Wireless AC Performance The DWL-8610AP delivers reliable, high-speed wireless performance using the latest 802.11ac standards with maximum wireless signal rates of up to 450 Mbps over the 2.4 GHz b&, & 1300 Mbps over the 5 GHz band 1. With band steering, the DWL-8610AP detects whether or not the wireless client is dual-band capable & if it is, it will push the client to connect to the less congested 5 GHz 802.11ac/n network. It does this by actively blocking the client’s attempts to associate with the 2.4 GHz network. Band steering can ensure clients on the 5 GHz band can achieve their maximum performance without being bottle-necked by legacy 2.4 GHz 802.11b/g/n clients. This way, you can make the most of Wireless AC technology & at the same time ensure backwards compatibility with existing legacy equipment. AC Smart Beam™ technology enables the DWL-8610AP to have even greater reach than ever before. By focusing the wireless signal at connected devices, it guarantees continuous fast wireless speeds, anywhere in the office, even under heavy network utilisation or in area that had bad wireless signal Self-Configuring Cluster For small businesses that need to deploy multiple APs but lack the resources to tackle the complicated task of network management, the DWL-8610AP’s self-configuring cluster feature offers the ideal solution. When a small number of DWL-8610 A Ps are deployed on the network, they may be configured to form a self-configuring cluster. Once the administrator configures one access point, the same configuration can then be applied to all remaining APs. Up to 16 APs may be used to form a cluster, making setting up your business wireless network a breeze. Centrally Manage your Wireless Network When working in conjunction with a D-Link Unified Switch or Wireless Controller, the DWL-8610AP, like other D-Link Unified Access Points, may be centrally managed. This allows up to 192 D-Link Unified Access Points to be deployed & managed easily & efficiently. Once the APs are discovered by the switch/controller, the administrator can push specific a set of configurations onto them, rather than having to do so one by one. In addition, RF resource management & security are also managed centrally, thus allowing the administrator to pre-emptively identify potential deficiencies & weaknesses in the network. Automatic RF Management Saves Power & Money When a number of access points are deployed close to each other, interference may result if proper RF management isn’t implemented. When a DWL-8610AP senses a neighbour nearby, it will automatically select a non-interfering channel. This greatly reduces RF interference & will allow the administrator to deploy APs more densely. To further minimise interference, when a nearby AP is operating on the same channel, the DWL-8610AP will automatically lower its transmission power 2. When, for whatever reason, the nearby AP is no longer present, the DWL-8610AP will increase its transmission power to expand coverage. Quality of Service for Increased Connectivity The DWL-8610AP supports 802.1p Quality of Service (Qo S) for enhanced throughput & better performance of time-sensitive traffic like Vo IP & streaming DSCP. The DWL-8610AP is WMM-certified, so in the event of network congestion, time-sensitive traffic can be given priority ahead of other traffic. Furthermore, when a number of DWL-8610 A Ps are in close proximity with each other, an access point will refuse new association requests once its resources are fully utilised. Instead, the association request will be picked up by a neighbouring unit. This feature ensures that no single AP is overburdened while others nearby sit idle. Security The DWL-8610AP supports the latest standards in Wi-Fi security, including WEP, WPA, WPA2, & 802.1X. In addition, it supports up to 16 Virtual Access Points (VAP) per radio, for a total of 32 VAPs, which allows the administrator to assign different access privileges to different groups of users. When Station Isolation is enabled, the AP blocks communication between wireless clients on the same radio & VAP. Rogue APs in the network can be easily detected, & the administrator will be immediately notified of any security threat. When used together with D-Link’s Wireless Controller or Unified Switch, the security can be enhanced further. Convenient Installation With an embedded antenna & a simple housing, the DWL-8610AP can be installed on a wall or ceiling & blends in with most office environments. Enclosed in a plenum-rated chassis, the DWL-8610AP adheres to strict fire regulations for placement in air passageways. For easy installation, it has integrated 802.3at Power over Ethernet (Po E) support, allowing installation of this device in areas where power outlets are not readily available. ...

The D-Link DWL-50AT is a 5d Bi Gain Dipole Antenna with Reverse SMA connector. It can help to improve the transmit rate & extend the transmit distance of wireless access point or wireless gateway router which have a reverse SMA connector. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The DWL-P50 Power over Ethernet adapter is a single-port splitter that provides DC power for a non-Po E-equipped device, such as a surveillance camera or a wireless access point. It is designed to operate with LAN switches & other equipment that support industry-standard 802.3af Power over Ethernet (Po E) to deliver operation power to the networked device, allowing you to install the device at places such as on a rooftop or near a ceiling, where power is not easily accessible. The DWL-P50 supports both 5VDC & 12VDC power & can be flexibly deployed with network devices with different power voltage requirements. The DWL-P50 is useful for installation at a factory or TM Wi-Fi hot spot. This compact adapter means that you can install your surveillance cameras & wireless LAN devices on a building rooftop, on or near a ceiling for maximum coverage. Your cameras or wireless access points can be placed up to 100 meters away from a power source. It is at these places that wall AC outlets are inaccessible & providing power to these locations is difficult & expensive. The DWL-P50 is also handy for installation at offices with Internet telephones connected to a Po E Ethernet switch. It eliminates the need to individually power each IP phone. By transmitting remote power through the standard network cabling, the DWL-P50 does away with the need for an AC outlet at each device location. Only a single Ethernet cable is run to each device instead of separate power & data cables. On a standard 4-wire UTP Category 5 cable, only two pairs (pins 1, 2, 3 & 6) are used for Ethernet data transfer. At one end, your Po E Ethernet switch inserts DC voltage into the unused wires, taking advantage of the unused pair of the network cable wires. At the other end, the DWL-P50 taps the DC power from the Ethernet cable for use by the non-Po E device. Consequently, a single Category 5 cable can now carry both Ethernet data & DC power. The idea is to supply the remote end with power & Ethernet connectivity via a single network cable. In addition to eliminating the need for additional, separate wiring for power, the DWL-P50 is also a useful tool that forms part of your centralized power network installation. A central UPS can be added to the Po E switch, to which all your wireless access points, surveillance cameras & Internet phones are connected. This installation provides uninterrupted power without the need to deploy a separate UPS for each device. The DWL-P50 is very small in size & lightweight & requires no configuration setting. It is designed for quick & easy deployment, & can be hooked with a simple plug to a network device placed on a high wall or ceiling. This Po E adapter supports both 5V & 12V DC output, allowing you to deploy it with a variety of devices with different power requirements. A built-in slide switch allows you select the required power output. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The DWM-156 3.75G HSUPA USB (Universal Serial Bus) Adapter means that you can connect your notebook to your mobile broadband service wherever you are in the world. While connected, you can transfer data, stream media, & send SMS messages. The DWM-156 is completely unlocked & works with data SIM cards from any operator. • Based on HSUPA 3G technology: up to 7.2 Mbps data transfer speed • Fast USB (Universal Serial Bus) 2.0 interface • Operating Systems: Windows VISTA/XP/2000 & MAC OS X 10.4 & higher • Built-in drivers for true plug-&-play installation • Works as a 3G modem for use with selected D-link routers • Unlocked: works with data SIM cards from any operator Please note: networking & wireless components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The DWM-222 4G LTE USB (Universal Serial Bus) Adapter is a portable travel modem that means that you can connect to the Internet wherever you are. With fast downlink & uplink data rates, as well as low latency, it provides you with a high-performance & responsive connection when youre on the road. Features Scalable, flexible, centralized wireless access points management Get connected with 4G LTE
- stay connected with high-speed Internet access when youre on the road. Download files, stream music & videos, and browse the web using the latest mobile Internet technology. Remote access made easy Plug & play
- integrated device drivers means all you have to do is plug it into your computer & it will be installed automatically. Built for business Travel-friendly design
- pocket-sized with no batteries or cables, making it easy to take with you when youre away from home or traveling.


...

The D-Link DWM-312 4G LTE M2M router is an easy-to-deploy, high performance 3G/4G router. It features a dedicated Fast Ethernet port & dual-SIM 4G LTE mobile broadband for maximum redundancy & &64258;exibility for intense machine to machine applications. Powerful VPN tools & advanced remote management combined with ease of use make the DWM-312 ideal for both large-scale & individual deployments. ...