The DGS-3630 Series Layer 3 Stackable Managed Switch is designed for Small Medium Businesses (SMBs), Small Medium Enterprises (SMEs), enterprises, & ISPs. It delivers high-performance, flexibility, fault tolerance, & advanced software features for maximum return on investment. With Gigabit Ethernet SFP, 10 Gb E SFP+, security features, & advanced Quality of Service (Qo S), the DGS-3630 Series can act as core, distribution or access layer switches. High port densities, switch stacking, & easy management make the DGS-3630 Series suitable for a variety of applications. ...

The DGS-3630 series Layer 3 stackable managed switches are designed for small to mediumsized businesses, small to medium-sized enterprises, large enterprises, and Internet service providers. They deliver high performance, flexibility, fault tolerance, and advanced software features for maximum return on investment. With Gigabit Ethernet, SFP, 10 Gb E SFP+, security features, and advanced Quality of Service (Qo S), the DGS-3630 series can act as core, distribution, or access layer switches. High port densities, switch stacking, and easy management make the DGS-3630 series suitable for a variety of applications. ...

The DGS-3630 Series Layer 3 Stackable Managed Switch is designed for Small Medium Businesses (SMBs), Small Medium Enterprises (SMEs), enterprises, and ISPs. It delivers high-performance, flexibility, fault tolerance, and advanced software features for maximum return on investment. With Gigabit Ethernet SFP, 10 Gb E SFP+, security features, and advanced Quality of Service (Qo S), the DGS-3630 Series can act as core, distribution or access layer switches. High port densities, switch stacking, and easy management make the DGS-3630 Series suitable for a variety of applications. ...

The DGS-1005D (Green Ethernet version) is a 5-port unmanaged Gigabit switch that consumes less energy than conventional switches of the same

Specification. This switch reacts when a device attached to it is turned off, by placing the corresponding port in a standby mode that requires less power. In addition, the switch is able to detect the Ethernet cable length & adjust power usage accordingly, hence saving any surplus power that would otherwise dissipate as heat. These two features combined can save up to 27% of the power used by the switch. This function allows the flow of data to be adjusted between switch & server, to ensure a reliable data transfer. At 2000 Mbps full duplex, the switch provides high-speed data pipes to your servers with minimum data transfer loss. All ports support auto-negotiation of MDI/MDIX cross over. This eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server, a hub or a switch, using the usual straight-through twisted-pair cable.

...

Also available in 8-port version
- click here. Think Green D-Link takes the lead in networking industry to release Green Ethernet
...

. rm-cont h 2, . rm-row h 2{margin:0 0 10px}.u 1, . u 1-2{float:left}.rm-row{
Width:725px;overflow:hidden;padding:30px 0;border-bottom:1px
...

The DGS-1008D (Green Ethernet version) is an 8-port unmanaged Gigabit switch that consumes less energy than conventional switches of the same

Specification. The DGS-1008D (Green Ethernet version) reacts when a device attached to it is turned off, by placing the corresponding port in a standby mode that requires less power. In addition, the switch is able to detect the Ethernet cable length & adjust power usage accordingly; hence saving any surplus power that would otherwise dissipate as heat. All ports support auto-negotiation of MDI/MDIX cross over. This eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server, a hub or a switch, using the usual straight-through twisted-pair cable.

...

The DGS-1008P Po E Gigabit Desktop switch provides a cost-effective way for SOHO & SMB to benefit from the Power over Ethernet (Po E) technology by allowing users to power up devices such as wireless access points, network cameras or IP phones directly from the network cables. The DGS-1008P is equipped with Gigabit ports for faster speeds, & integrates D-Link's Green Ethernet technology to save power when the switch is not in use. Its fanless design makes it completely silent so it is ideal for offices, libraries or meeting rooms. The first four ports of the DGS-1008P support the IEEE 802.3af Po E standard. Each of these four ports can supply up to 15.4 Watts, making it a very convenient solution for applications that are far away from power outlets, or when it is necessary to minimize the clutter of extra power supplies. The switch will automatically detect the power that a connected Po E device requires so no configuration is needed. A failsafe mechanism will cut off the power in case of an unexpected Po E overload, protecting both the switch & the connected device. Every time the DGS-1008P is powered up, it runs a micro diagnostics routine to check the integrity of the connected Ethernet cables. If a failure is detected, the switch will flag it by means of its front panel LEDs, making it easy for the user to troubleshoot wiring problems. Despite being an unmanaged, Plug & Play switch, the DGS-1008P is able to classify network traffic by assessing the existing 802.1p & DSCP fields in the Ethernet frames & IP packets respectively, & forward them out of its ports depending on their priority. This allows for a smooth integration of video, voice & data traffic without delays or loss of quality. The DGS-1008P is part of D-Link Green, D-Link's eco-friendly technology, providing energy savings, reduced power consumption, & a longer product lifespan without sacrificing operational performance or functionality. This switch implements the Green Ethernet technology, which can save a substantial amount of energy by detecting the connected cable lengths, adjusting the power accordingly; & the port status, putting them in low-power, st&-by mode when no network traffic is detected. Thanks to these power reductions, D-Link has been able to remove the fans in the DGS-1008P's design, making it completely silent & dramatically increasing its lifespan. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The DGS-1008P Po E Gigabit Desktop switch provides a cost-effective way for SOHO & SMB to benefit from the Power over Ethernet (Po E) technology by allowing users to power up devices such as wireless access points, network cameras or IP phones directly from the network cables. The DGS-1008P is equipped with Gigabit ports for faster speeds, and integrates D-Links Green Ethernet technology to save power when the switch is not in use. Its fanless design makes it completely silent so it is ideal for offices, libraries or meeting rooms. The first four ports of the DGS-1008P support the IEEE 802.3af Po E standard. Each of these four ports can supply up to 15.4 Watts, making it a very convenient solution for applications that are far away from power outlets, or when it is necessary to minimize the clutter of extra power supplies. The switch will automatically detect the power that a connected Po E device requires so no configuration is needed. A failsafe mechanism will cut off the power in case of an unexpected Po E overload, protecting both the switch & the connected device. Every time the DGS-1008P is powered up, it runs a micro diagnostics routine to check the integrity of the connected Ethernet cables. If a failure is detected, the switch will flag it by means of its front panel LEDs, making it easy for the user to troubleshoot wiring problems. Despite being an unmanaged, Plug & Play switch, the DGS-1008P is able to classify network traffic by assessing the existing 802.1p & DSCP fields in the Ethernet frames & IP packets respectively, and forward them out of its ports depending on their priority. This allows for a smooth integration of video, voice & data traffic without delays or loss of quality. The DGS-1008P is part of D-Link Green, D-Links eco-friendly technology, providing energy savings, reduced power consumption, and a longer product lifespan without sacrificing operational performance or functionality. This switch implements the Green Ethernet technology, which can save a substantial amount of energy by detecting the connected cable lengths, adjusting the power accordingly;and the port status, putting them in low-power, st&-by mode when no network traffic is detected. Thanks to these power reductions, D-Link has been able to remove the fans in the DGS-1008 Ps design, making it completely silent & dramatically increasing its lifespan. ...

Think Green! D-Link takes the lead in networking industry to release Green Ethernet technology with its new series of SOHO Gigabit switches. These environmentally-friendly devices decrease energy costs through the reduction of power consumption without sacrificing operational performance or functionality, providing benefits to both the ecosystem & Home/SOHO users. They are designed to help conserve energy, protect our environment from harmful substances, & reduce waste by using recyclable packaging. Automatically powers down ports that have no link Budgets power output for different Ethernet cable lengths Protecting the environment Complies with Ro HS directive that restricts the use of certain hazardous materials Complies with WEEE (Waste Electrical & Electronic Equipment) directives that use recyclable packaging to help reduce waste that goes into theenvironment Inexpensive Gigabit solution for workgroup users from desktops Easily installable on desktop 16 or 24 10/100/1000 Mbps Gigabit ports on Cat. 5 cable 32 Gbps (16-port switch), 48 Gbps (24-port switch) switching fabric capacity Auto MDI/MDIX cross over for all ports Secure store-&-forward switching scheme Full/half-duplex for Ethernet/ Fast Ethernet speeds Blazing 2000 Mbps full duplex for Gigabit speed IEEE 802.3x Flow Control Plug-&-Play installation Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. ...