D-Link DES-1016R+ 16 Port 10/100 Rackmountable Switch Enhance Network Performance This unmanaged 10/100 Mbps switch is designed to enhance workgroup performance while providing a high level of flexibility. Powerful yet easy to use, this device allows users to simply plug any port to either a 10 Mbps or 100 Mbps network to multiply bandwidths, boost response time & satisfy heavy load demands. 16 10/100 Mbps Ports These ports detect the network speed & auto-negotiate between 100BASE-TX & 10BASE-T, as well as full- & half-duplex. Auto-adjustment of MDI/MDIX Cross Over All 10/100 Mbps ports auto-adjust MDI/MDIX twisted-pair cable cross-over, eliminating the need for cross-over cables or uplink buttons. You simply plug any port to a server, a workstation or a hub, using the usual straight-through twisted-pair cable. The port will auto-sense the attached device type & adjust the Tx, Rx pin assignments accordingly before transmitting & receiving data. Optional 100 Mbps Fibre Ports An open slot is provided on the front panel to allow installation of an optional Fast Ethernet fibre module. This module provides 2 100 Mbps-fiber ports for 2 server connections or switch-to-switch cascading over fibre cables, which can be up to 2km long. Flow Control Protects Against Data Loss Using flow control (in full duplex & applicable to all 10/100 Mbps ports), the switch monitors the buffer status of each port. During peak usage, if the buffer fills to capacity, the switch detects this & signals to the attached node to delay sending new data until the switch can accept it. This operation minimises the chance of any buffer overrun where incoming data overwrites the current data that has not been completely flushed out of the buffer. This function works with flow control supported Fast Ethernet adapters (installed in servers) connected to the switch in dedicated bandwidth configuration. It can also be applied to switch-to-switch cascading. Easy Expansion Cascading 2 switches together to expand the network using the twisted-pair ports is easy. As all 10/100 Mbps ports support auto-negotiation of MDI/MDIX twisted-pair cable crossover, you simply connect 2 switches together without having to find a cross-over cable or to make sure the ports are uplink ports. At 200 Mbps full-duplex speed, all ports provide a fast switch-to-switch dedicated bandwidth. Product Highlights 1 expansion slot for 2 optional 100 Mbps fibre ports Full/half duplex support for each port Auto-learning of network configuration Back pressure in half duplex mode Auto-adjustment of MDI/MDIX cross over for each port Auto-correction of twisted-pair polarity reverse RAM buffer dynamically allocated for each port Number of Built-in Ports 16 x 10/100 Mbps port
- Auto-negotiation of MDI-II (One MDI-X MIDI uplink port) 2 x Expansion Slots for DES-102F Fibre Modules LEDs Per port: Link, Speed, Duplex, Activity, Collision Performance Transmission Method Store-&-forward Forwarding Rate 14, 800 frames/sec max for 10M port 148, 000 frames/sec max for 100M port Network latency Less than 80 microseconds for 64-byte frames in store-&-forward mode for 10 Mbps to 100 Mbps transmission Mac Address Automatic MAC Address Learning Address table up to 4K MAC address per device RAM Buffer 10/100 buffer memory: 256 KB embedded memory per 8 ports

Dimensions 441 x 207 x 44 mm (17.3 x 8.1 x 1.73 inches) 19-inch rack-mount width, 1 U height Manufactures Warranty 5 years Package Contents DES-1016R+ Switch External UK Power Adapter Users Guide Quick Installation Guide Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.


...

The DES-102F is a two-port Ethernet module designed to support the DSS-24+ Switch as an optional slide in module, which provides a two port 100BASE-FX Fast Ethernet connection. As an expansion module, the DES-102F increases connection distances without requiring signal regeneration using a repeater to re-boost the signal. With the two SC type port connectors, connection utilizing a fiber link can be initiated to servers or backbone switches for network expansion. DES-102F is targeted at small & medium businesses. ...

- Plug & Play operation
- 5 Fast Ethernet ports
- Non-blocking architecture: simultaneous full speed on all ports
- Fanless,


...

. rm-cont h 2, . rm-row h 2{margin:0 0 10px}.u 1, . u 1-2{float:left}.rm-row{
Width:725px;overflow:hidden;padding:30px 0;border-bottom:1px
...

The DES-1100 Easy Smart series is the ideal entry-level solution for managed networks. Equipped with 16 or 24 Fast Ethernet ports, the DES-1100 series integrates basic configurable options that provide performance & scalability. With an easy to use web interface, these switches help customers to quickly & easily deploy their networks. Their fanless design makes them completely silent & very reliable, & their eco-friendly technology saves energy & money. The basic lineup of L2 features in the Easy Smart series makes them very suitable for SMB with small IT teams, without sacrificing on performance & security. Network downtime is reduced drastically with loopback detection & broadcast storm control. Security & confidentiality of network traffic is guaranteed with VLANs. Ample bandwidth on the uplinks to the rest of the network can be achieved with Link Aggregation, & the Cable Diagnostics function provides an easy & convenient way to quickly detect & troubleshoot cabling problems. Management is through an intuitive web interface or a PC-based Smart Console Utility. Both provide a convenient & easy way of configuring the switches, allowing for effective network deployments. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. ...

D-Link's 24-port Third Generation Smart Switch is part of D-Link's third generation of Web Smart Switches, designed to provide Small to Medium Businesses complete control over their network. In a 19" metal case with innovative fanless design, the switch incorporates a complete lineup of Layer 2 features, including Port Mirroring, Spanning Tree, Link Aggregation & IGMP Snooping. Network maintenance features include Loopback Detection & Cable Diagnostics. The DES-1210-28 features state-of-the-art security technologies including ACL filtering & IP-MAC-Port Binding. With D-Link Safeguard Engine, the switch remains available in the event of a virus outbreak. Furthermore, the DES-1210-28 uses Auto Voice VLAN, ensuring higher priority for voice traffic. Quality of Service (Qo S) & granular bandwidth control down to 64 kbps are also included. A characteristic of D-Link's web Smart Switches is their ease of use, via a simple web browser. Advanced users can also configure the switch via Telnet or SNMP package such as D-Link's D-View 6.0. D-Link's Smart Console utility is also included for the joint management of several switches. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. ...

The DES-1210-28P is the first Po E switch in the Fast Ethernet Smart III series. Equipped with 24 Fast Ethernet ports, 2 Gigabit ports & 2 additional Gigabit copper/fiber combo ports, this switch integrates the features of the successful Smart III series with Po E & the Po E+ functionality. With an easy to use web interface & eco-friendly design, the DES-1210-28P helps customers to quickly & easily deploy their networks, saving energy & money. The DES-1210-28P is the ideal solution as an advanced edge switch for SMB & enterprise networks. The 4 additional Gigabit ports allow for fast & reliable copper or fiber uplinks to the rest of the infrastructure. The Asymmetric VLAN support will provide access to shared resources such as servers or the Internet, without complicated VLAN configurations. in addition, the innovative Auto Voice VLAN feature allows for easy integration of 3rd party IP phones, placing Vo IP traffic in a separate VLAN, thus ensuring the quality & security of Vo IP traffic. The DES-1210-28P complies with the 802.3af Po E standard, and the recently ratified, high-power 802.3at standard. This gives you extra flexibility at deploying appliances such as wireless Access Points, IP cameras & Vo IP phones in your network, even in mix-vendor environments. For added flexibility & power-saving, the DES-1210-28P integrates the Time-Based Po E feature, which turns off the power when it is not needed, for example, at nights or during the weekends. This means that Po E-powered devices which otherwise would be always on, can be switched off centrally, saving power & money. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

D-Link's 48-port Third Generation Smart Switch is part of D-Link's third generation of Web Smart Switches, designed to provide Small to Medium Businesses complete control over their network. In a 19" metal case with innovative fanless design, the switch incorporates a complete lineup of Layer 2 features, including Port Mirroring, Spanning Tree, Link Aggregation & IGMP Snooping. Network maintenance features include Loopback Detection & Cable Diagnostics. The DES-1210-52 features state-of-the-art security technologies including ACL filtering & IP-MAC-Port Binding. With D-Link Safeguard Engine, the switch remains available in the event of a virus outbreak. Furthermore, the DES-1210-52 uses Auto Voice VLAN, ensuring higher priority for voice traffic. Quality of Service (Qo S) & granular bandwidth control down to 64 kbps are also included.A characteristic of D-Link's web Smart Switches is their ease of use, via a simple web browser. Advanced users can also configure the switch via Telnet or SNMP package such as D-Link's D-View 6.0. D-Link's Smart Console utility is also included for the joint management of several switches. ...

The DES-3200 Series is a member of D-Link’s Layer 2 managed switch family designed for the ETTX, FTTX, & enterprise markets. The DES-3200 Series provides 8/16/24, or 48 10/100 Mbps Fast Ethernet connections & various SFP or combo Gigabit/SFP ports uplink options. The DES-3200-10/18 comes in a 9/11-inch compact size & incorporates a fanless design suitable for desktop, telecom cabinet, or distribution box deployment. The DES-3200-28 & 52 models are 1U 19” rack mount size & provide 24/48 copper connections on Fast Ethernet with the beneficial design of 2/4 Gigabit/SFP Combo ports which provide up to 4 Gbps uplink bandwidth or dual Ethernet ring topology support. The DES-3200-28P/52P are IEEE 802.3af & IEEE 802.3at Power over Ethernet (Po E) compliant switches & provide 15.4 W per port & up to 30 W in the first four/eight ports. The Po E/ Po E+ powers devices such as video IP phones, wireless access points, & IP cameras directly through Ethernet cables which makes the deployment of the network much easier. All switches of the DES-3200 series feature embedded 2 or 4 Gigabit SFP uplinks, which provides flexible network topology choices such as ring, tree, or mixed. Security & Availability The DES-3200 Series supports 802.1X port-based/host-based access control, Guest VLAN & RADIUS/TACACS /XTACACS/TACACS+ Authentication for strict access control over the network. The IP-MAC-Port Binding feature allows administrators to bind a source IP address with an associated MAC for a defined port number to enhance user access control. Furthermore, with the DHCP snooping feature, the switch automatically pairs the IP/MAC by snooping DHCP packets & saving them to the IMPB white list. These features play a significant role in keeping the network secure & auditable. The built-in D-Link Safeguard Engine identifies & prioritizes “CPU interested” packets to prevent malicious traffic from interrupting normal network flows & protects switch operation. In addition, the DES-3200 Series provides various multi-layer Access Control List (ACL) rules. Administrators are able to limit the network services or access rights without impacting the switch performance. Resilience/ Performance Enhancement For mission critical environments the DES-3200 Series supports 802.1D-2004 edition, 802.1w & 802.1s Multiple Spanning Tree (MSTP). STP means that you can configure the switch with a redundant backup bridge path, so transmission & reception of packets can be guaranteed in the event of any failed switch on the network. The switches also support 802.1AX & 802.3ad Link Aggregation, enabling you to group multiple ports in parallel to form a single port, increasing bandwidth & redundancy for higher availability. For Quality of Service (Qo S), the switch supports 802.1p & advanced packet classification based on TOS, DSCP, MAC address, IP addresses, VLAN ID, TCP/UDP port number, protocol type, & user-defined packet content. This enables flexible configuration for specific multi-media applications such as Vo IP or IPTV. Furthermore, the DES-3200 series supports automatic, effective Qo S function for voice traffic. The Voice VLAN1

Includes:: the voice end points automatically in to a dedicated VLAN with higher priority to guarantee the quality & security of the voice traffic. Traffic & Bandwidth Control The bandwidth control feature allows network administrators to define the ingress/egress throughput levels for each port with granularity down to 8 Kbps. The switch also supports the storm control feature which minimizes damages within the network. Port mirroring helps administrators facilitate traffic diagnostics or track switch performance & make changes if necessary. The DES-3200 Series supports a two rate & single-rate Three Color Marker (tr TCM/sr TCM) to classify traffic streams into conforming & nonconforming groups to guarantee the minimum bandwidth for important traffic. Multicast Applications The DES-3200 series provides full L2 multicast functions, including IGMP snooping, IGMP filtering, fast leave, & multicast traffic configuration for specific ports. With L2 Multicast support, the DES-3200 series shows its ability to handle growing IPTV application. The Host-based IGMP/MLD Snooping allows multiple multicast subscribers per physical interface & ISM VLAN sends multicast streams in a multicast VLAN to save bandwidth in the backbone network. The ISM VLAN profiles allow users to bind/replace the pre-defined multicast registration information to subscription ports quickly & easily. OAM The DES-3200 series provides cable diagnostics to check the status of network cables & pinpoint the cause of any network cable malfunction without requiring on-site operator support. The 802.1ag Connectivity Fault Management (CFM) feature provides tools to monitor & troubleshoot end-to-end Ethernet networks, allowing service providers to check connectivity, isolate network issues, & identify customers affected by network issues. The 802.3ah Ethernet OAM, Dying Gasp, & D-Link Unidirectional Link Detection (DULD) functions can improve network management on the Ethernet & help maintain a stable network connection & support fault locating. Management Capability The DES-3200 series supports standard management protocols such as SNMP, RMON, Telnet, SSH/SSL security authentication, & DHCP relay option 82. The switch series also features a web-based GUI that provides a user-friendly interface & easy management. DHCP auto-configuration is an enhanced management feature that allows administrators to preset a configuration on a TFTP server & apply to switches automatically when the switch is trying to get IP addresses from DHCP. It makes the switch deployment easier & quicker, especially in a large scale network. LLDP & LLDP-MED1 provide quick discovery of Ethernet equipment especially for endpoint devices. According to the discovery result, administrators can easily push the configurations to corresponding devices & build up a topology drawing through the network management system (NMS) quickly. D-Link Single IP Management (SIM) simplifies & speeds up management tasks, allowing multiple switches to be configured, monitored & maintained from any workstation running a web browser through one unique IP address. The DES-3200 Series also works with D-Link’s D-View 7 software. D-View 7 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, & security. D-View 7 provides a useful set of tools for network administrators who want to effectively manage device configurations, fault tolerance, performance, & security. IPv 6 Ready The DES-3200 Series has been certified with IPv 6 Ready Logo Phase 2 which guarantees the connectivity & manageability in an IPv 6 network. Furthermore, it supports IPv 4/v 6 dual stack function that allows the switch to act as a bridge between IPv 4 & IPv 6 networks. As networks grow & the need for larger addressing & higher security becomes critical, the DES-3200 Series supports various IPv 6 ACL, IMPBv 61, & L3 Control Packet Filtering functions to protect the network against attacks & meet the requirements for the design of the IPv 6 architecture.

...

D-Links DFE-530TX Fast Ethernet adapter is a high-performance auto-sensing 10/100 Mbps dual-speed adapter for the PCI bus. The adapter operates in the 32-bit Bus Master mode, delivering throughputs at multi-megabits per second with little stress on hosts CPU. Network administrators can install optional boot ROMs on the adapters to implement network security. Diskless workstations equipped with these ROMs can remote boot from Net Ware or Windows NT servers & access authorized data. The adapter supports all major network operating systems, including Net Ware, Windows & Linux. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...