This switch provides 24 10/100 Mbps ports to connect to 24 workstations & servers. All ports auto-sense the network speed of the computers & hubs to run at either 10 Mbps or 100 Mbps. All ports auto-negotiate between full & half duplex, flow control, & MDI/MDIX twisted-pair cross over. This switch provides an open slot for you to install 2 optional Fast Ethernet fiber ports to attach to 2 servers or cascading switches over the 2 km long reliable fiber cables. Expansion is easy through any twisted-pair port. You cascade several switches together through this port to get more ports. IEEE 802.3x Flow Control allows your servers to directly connect to this switch for fast, reliable data transfer. At 200 Mbps full duplex, this switch provides high-speed data pipes to your servers with minimum data transfer loss. Auto-negotiation of MDI/MDIX cross over eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server, workstation, or hub using the usual straight through twisted-pair cable. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The DES-105 5-Port Fast Ethernet Unmanaged Desktop Switch is a 5-port 10/100 Mbps Fast Ethernet switch that means that you can quickly set up a wired network. Connect the DES-105 to multiple computers together to share files & folders, or connect it to a router to share an Internet connection. Auto-Sensing 10/100 Ports The DES-105 uses auto-sensing 10/100 Mbps ports, allowing a small workgroup to flexibly connect to Ethernet & Fast Ethernet devices to create an integrated network. These ports detect the network speed & auto-negotiate between 10BASE-T & 100BASE-TX, as well as between full & half-duplex, allowing you to get the maximum speed possible for each device connected to your network. Auto MDI/MDIX Crossover All of the ports on the DES-105 support automatic MDI/MDIX crossover, eliminating the need for crossover cables or uplink ports. Each port can be plugged directly to a server, hub, router, or switch using regular straight-through twisted-pair Ethernet cables. In addition, the DES-105 features multiple front, easy-to-access Ethernet ports with two colour LED indicators per port to easily distinguish link status. Flow Control for Secure Transmission When a port reaches its receiving buffer capacity, the 802.3x flow control feature activates to minimize dropped packets. By minimizing the number of dropped packets, the switch provides a more reliable connection for all of your connected devices while surfing the web, playing games, or accessing media. Think Green The DES-105 is a plug-&-play networking switch that offers D-Link’s Green Technology to save energy & reduce heat, which in turn extends product life without sacrificing performance or functionality. The switch supports IEEE 802.3az Energy-Efficient Ethernet (EEE) which detects when a connected computer is shut down or when there is no Ethernet traffic, in which the switch will proceed to power down the idle port, saving a substantial amount of power. ...

The DES-1100 Easy Smart series is the ideal entry-level solution for managed networks. Equipped with 16 or 24 Fast Ethernet ports, the DES-1100 series integrates basic configurable options that provide performance & scalability. With an easy to use web interface, these switches help customers to quickly & easily deploy their networks. Their fanless design makes them completely silent & very reliable, & their eco-friendly technology saves energy & money. The basic lineup of L2 features in the Easy Smart series makes them very suitable for SMB with small IT teams, without sacrificing on performance & security. Network downtime is reduced drastically with loopback detection & broadcast storm control. Security & confidentiality of network traffic is guaranteed with VLANs. Ample bandwidth on the uplinks to the rest of the network can be achieved with Link Aggregation, & the Cable Diagnostics function provides an easy & convenient way to quickly detect & troubleshoot cabling problems. Management is through an intuitive web interface or a PC-based Smart Console Utility. Both provide a convenient & easy way of configuring the switches, allowing for effective network deployments. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The DES-3028 series switches are managed Layer 2 Ethernet switches designed as the premium devices in the entry-level network management category. These switches offer very rich functions to let SMB & even enterprises set up a secure & effective departmental network at affordable cost. Outstanding features include high port densities, 4 Gigabit uplinks, Power over Ethernet support, comprehensive network security, granular bandwidth control & extensive network management. With these switches, businesses can now optimize their networks at both the function & cost levels for maximum results. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

This product is customized for use in the UK & Irel&. What it does? The DES-1005D 5-port Desktop Switch means that you can easily connect any Ethernet-enabled device, thus extending your home network. No configuration is required, making this switch completely plug-&-play. Each of the 5 intelligent ports detects the network speed & auto-negotiate between 100BASE-TX & 10BASE-T, as well as between full- & half-duplex. Each supports auto-negotiation of MDI/MDIX cross over, eliminating the need for cross-over cables or uplink ports. ...

. rm-cont h 2, . rm-row h 2{margin:0 0 10px}.u 1, . u 1-2{float:left}.rm-row{
Width:725px;overflow:hidden;padding:30px 0;border-bottom:1px
...

D-Link DES-1016D 16 Port 10/100 Ethernet Switch The D-Link DES-1016D unmanaged switch with (16) 10/100BASE-T ports is the latest addition to our popular line of Express Ether Network products. D-Link’s Express Ether Network line of products combines ease of use with unsurpassed performance for an exceptional value. Ease of Use The DES-1016D is truly a Plug-&-Play switch, with features like: Auto Speed Sensing. The Switch senses whether a network device is running at 10 Mbps or 100 Mbps & automatically adjusts for optimal performance. Auto Negotiation (Full or Half Duplex). Whether you are running at Half- or in Full-Duplex, the Switch automatically negotiates & runs the highest supported transmission rate. Auto MDI/MDIX Crossover. All ports support auto-negotiating MDI/MDIX detection, which eliminates the need for crossover cables or uplink ports. The DES-1016D is the perfect choice for Plug-&-Play support for 10BASE-T & 100BASE-T networks. Wire-speed Performance The DES-1016D features a non-blocking wire-speed architecture, with a 4.8 Gbps (in full duplex)switching capacity, for maximum data throughput. The DES-1016D also features an integrated universal power supply, & per port diagnostics LEDs that make it easy to “spot check” for problems. With wire-speed filtering & Store-&-Forward switching, the DES-1016D maximizes network performance while minimizing the propagation of bad network packets. Product Highlights Plug-&-Play High-Speed Switching 4.8 Gbits (in full duplex) Non-Blocking Back Plane Up to 200 Mbps per Port Wire Speed Reception & Transmission Broadcast Strom Protection Back Pressure Flow Control for Half-Duplex Great for SOHO Environment Number of Built-in Ports 16 x 10/100 Mbps port
- Auto-negotiation of MDI-II (One MDI-X MIDI uplink port) LEDs Per port: Link, Speed, Duplex, Activity, Collision Performance Transmission Method Store-&-forward Forwarding Rate 14, 800 frames/sec max for 10M port 148, 000 frames/sec max for 100M port Network latency Less than 80 microseconds for 64-byte frames in store-&-forward mode for 10 Mbps to 100 Mbps transmission Mac Address Automatic MAC Address Learning Address table up to 16K MAC address RAM Buffer Memory: 2 Mb RAM buffer dynamically allocated

Dimensions 324 x 231 x 45.5 mm (12.75 x 9.0 x 1.79 inches) Manufactures Warranty 5 years Package Contents DES-1016D Switch External UK Power Adapter User's Guide Quick Installation Guide Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance.


...

D-Link DES-1016R+ 16 Port 10/100 Rackmountable Switch Enhance Network Performance This unmanaged 10/100 Mbps switch is designed to enhance workgroup performance while providing a high level of flexibility. Powerful yet easy to use, this device allows users to simply plug any port to either a 10 Mbps or 100 Mbps network to multiply bandwidths, boost response time & satisfy heavy load demands. 16 10/100 Mbps Ports These ports detect the network speed & auto-negotiate between 100BASE-TX & 10BASE-T, as well as full- & half-duplex. Auto-adjustment of MDI/MDIX Cross Over All 10/100 Mbps ports auto-adjust MDI/MDIX twisted-pair cable cross-over, eliminating the need for cross-over cables or uplink buttons. You simply plug any port to a server, a workstation or a hub, using the usual straight-through twisted-pair cable. The port will auto-sense the attached device type & adjust the Tx, Rx pin assignments accordingly before transmitting & receiving data. Optional 100 Mbps Fibre Ports An open slot is provided on the front panel to allow installation of an optional Fast Ethernet fibre module. This module provides 2 100 Mbps-fiber ports for 2 server connections or switch-to-switch cascading over fibre cables, which can be up to 2km long. Flow Control Protects Against Data Loss Using flow control (in full duplex & applicable to all 10/100 Mbps ports), the switch monitors the buffer status of each port. During peak usage, if the buffer fills to capacity, the switch detects this & signals to the attached node to delay sending new data until the switch can accept it. This operation minimises the chance of any buffer overrun where incoming data overwrites the current data that has not been completely flushed out of the buffer. This function works with flow control supported Fast Ethernet adapters (installed in servers) connected to the switch in dedicated bandwidth configuration. It can also be applied to switch-to-switch cascading. Easy Expansion Cascading 2 switches together to expand the network using the twisted-pair ports is easy. As all 10/100 Mbps ports support auto-negotiation of MDI/MDIX twisted-pair cable crossover, you simply connect 2 switches together without having to find a cross-over cable or to make sure the ports are uplink ports. At 200 Mbps full-duplex speed, all ports provide a fast switch-to-switch dedicated bandwidth. Product Highlights 1 expansion slot for 2 optional 100 Mbps fibre ports Full/half duplex support for each port Auto-learning of network configuration Back pressure in half duplex mode Auto-adjustment of MDI/MDIX cross over for each port Auto-correction of twisted-pair polarity reverse RAM buffer dynamically allocated for each port Number of Built-in Ports 16 x 10/100 Mbps port
- Auto-negotiation of MDI-II (One MDI-X MIDI uplink port) 2 x Expansion Slots for DES-102F Fibre Modules LEDs Per port: Link, Speed, Duplex, Activity, Collision Performance Transmission Method Store-&-forward Forwarding Rate 14, 800 frames/sec max for 10M port 148, 000 frames/sec max for 100M port Network latency Less than 80 microseconds for 64-byte frames in store-&-forward mode for 10 Mbps to 100 Mbps transmission Mac Address Automatic MAC Address Learning Address table up to 4K MAC address per device RAM Buffer 10/100 buffer memory: 256 KB embedded memory per 8 ports

Dimensions 441 x 207 x 44 mm (17.3 x 8.1 x 1.73 inches) 19-inch rack-mount width, 1 U height Manufactures Warranty 5 years Package Contents DES-1016R+ Switch External UK Power Adapter Users Guide Quick Installation Guide Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.


...

The DES-102F is a two-port Ethernet module designed to support the DSS-24+ Switch as an optional slide in module, which provides a two port 100BASE-FX Fast Ethernet connection. As an expansion module, the DES-102F increases connection distances without requiring signal regeneration using a repeater to re-boost the signal. With the two SC type port connectors, connection utilizing a fiber link can be initiated to servers or backbone switches for network expansion. DES-102F is targeted at small & medium businesses. ...

- Plug & Play operation
- 5 Fast Ethernet ports
- Non-blocking architecture: simultaneous full speed on all ports
- Fanless,


...