The T28 series

Includes:: three ATX cases in which the mainboard mount, slot apertures, quick-fastener levers

...

The T28 series

Includes:: three ATX cases in which the mainboard mount, slot apertures, quick-fastener levers

...

The T28 series

Includes:: three ATX cases in which the mainboard mount, slot apertures, quick-fastener levers

...

With the housings of the T9 value series we compliment our collection with three ATX cases in various
Colours:
...

With the housings of the T9 value series we compliment our collection with three ATX cases in various
Colours:
...

With the housings of the T9 value series we compliment our collection with three ATX cases in various
Colours:
...

With the housings of the T9 value series we compliment our collection with three ATX cases in various
Colours:
...

The Tauron is a massive ATX format PC case & available in multiple color variations. There are two different versions in black but the mainboard mount, slot faceplates, hard drives installation bays, blades from the internal fans & the latches of the quick locking mechanisms are in a different color from the rest of the case, either toxic green or fiery red. Fittingly, the colorful elements on the inside is also coordinated with the illumination of both black versions: With the red version two 120 mm LED front fans the status LEDs are red, while in the green version these same elements are illuminated green. In addition, a completely white version of the Tauron is available which include blue illuminating front fans. Here the internal fans are equipped with white blades. The other key data of the individual variations are identical: The Tauron comes with an I/O panel located on the top of the case, which is protected by a cover. The I/O panel offers two USB3.0 ports as well as two audio & two USB2.0 ports. The USB2.0 & the audio ports connect directly to the mainboard, while the USB3.0 connects to an external USB3.0 interface either on the mainboard or a corresponding USB3.0 controller card. in addition, the Tauron’s I/O panel also has two fan controls. These two controls can regulate up to six case fans. With this, the airflow rate of the case can be quickly & easily adjusted to current conditions & individual demands. The entire structure of the case compliments the desire for proper cooling of the internal components. Two combined 120 mm fans in the front draw in cool air from the outside. A 120 mm fan on the rear side & a larger 170 mm fan on the ceiling blow the warm air out of the case. If that is not enough, the case also offers the option to install another 120 mm or 140 mm fan on the floor. The power supply has an autonomous cooling cycle: Cool air is supplied through the dust filter of the air intake on the case floor & blown out directly out through the rear of the case. In addition, air is drawn through inlets on the right side of the case which contributes to the cooling of the CPU & hard drives. The Tauron case has three hard drives cages, two of which are modular: They can be arranged, if necessary, to install long graphic cards up to a maximum length of 42 cm. The mounting of up to a maximum of seven 2.5" or 3.5" hard drives or Solid State Disks occurs through the decoupled installation bays. The hard drive cages allows up to three optical drives to be installed, with the lowest 5.25" drive bay offering the possibility to install a 3.5" drive bay. The installation of the optical drives & the 3.5" drive frame occur through the pre-installed quick locking mechanisms. The arrangement of cables on the inside occurs through our elaborate cable management system, in which the cables can be simply & cleanly stored behind the mainboard mount. This allows optimal airflow throughout the inside of the case. In addition to the cable feed through, a large hole for CPU coolers on the mainboard mount is provided, so when changing coolers the entire mainboard does not need to be removed from the case. The Tauron case has decoupled stand feet & delivery

Includes:: an extensive accessory set. In order to simplify the initial start-up of the case, a detailed instruction manual is available for download.

Features: ATX case 2x 5.25" drive bays (external) 1x 5.25" or 3.5" drive bays (external) 7x 2.5" or 3.5" bays with removable mounting trays for HDDs (internal) Top I/O: 2x USB3.0, 2x USB2.0 & 2x audio, power & reset button 7 slots for add-on cards Acrylic side panel Plastic front panel with air inlet, drive bay covers in mesh design Quick fasteners for optical drives, mainboard mounting with installation opening for CPU coolers 4 openings for water cooling Cable management system Interior painting Removable HDD brackets support long VGA cards up to 42 cm 2x fan speed controllers for up to 6 fans Dimensions: 510 x 205 x 495 mm (L x W x H) Weight: ~9.5kg Fan configuration: Case front 2x 120 mm LED fan (pre-installed) Rear panel 1x 120 mm fan (pre-installed) Top panel 1x 170 mm fan (pre-installed)



...

The Tauron is a massive ATX format PC case & available in multiple color variations. There are two different versions in black but the mainboard mount, slot faceplates, hard drives installation bays, blades from the internal fans & the latches of the quick locking mechanisms are in a different color from the rest of the case, either toxic green or fiery red. Fittingly, the colorful elements on the inside is also coordinated with the illumination of both black versions: With the red version two 120 mm LED front fans the status LEDs are red, while in the green version these same elements are illuminated green. In addition, a completely white version of the Tauron is available which include blue illuminating front fans. Here the internal fans are equipped with white blades. The other key data of the individual variations are identical: The Tauron comes with an I/O panel located on the top of the case, which is protected by a cover. The I/O panel offers two USB3.0 ports as well as two audio & two USB2.0 ports. The USB2.0 & the audio ports connect directly to the mainboard, while the USB3.0 connects to an external USB3.0 interface either on the mainboard or a corresponding USB3.0 controller card. in addition, the Tauronfs I/O panel also has two fan controls. These two controls can regulate up to six case fans. With this, the airflow rate of the case can be quickly & easily adjusted to current conditions & individual demands. The entire structure of the case compliments the desire for proper cooling of the internal components. Two combined 120 mm fans in the front draw in cool air from the outside. A 120 mm fan on the rear side & a larger 170 mm fan on the ceiling blow the warm air out of the case. If that is not enough, the case also offers the option to install another 120 mm or 140 mm fan on the floor. The power supply has an autonomous cooling cycle: Cool air is supplied through the dust filter of the air intake on the case floor & blown out directly out through the rear of the case. In addition, air is drawn through inlets on the right side of the case which contributes to the cooling of the CPU & hard drives. The Tauron case has three hard drives cages, two of which are modular: They can be arranged, if necessary, to install long graphic cards up to a maximum length of 42 cm. The mounting of up to a maximum of seven 2.5" or 3.5" hard drives or Solid State Disks occurs through the decoupled installation bays. The hard drive cages allows up to three optical drives to be installed, with the lowest 5.25" drive bay offering the possibility to install a 3.5" drive bay. The installation of the optical drives & the 3.5" drive frame occur through the pre-installed quick locking mechanisms. The arrangement of cables on the inside occurs through our elaborate cable management system, in which the cables can be simply & cleanly stored behind the mainboard mount. This allows optimal airflow throughout the inside of the case. In addition to the cable feed through, a large hole for CPU coolers on the mainboard mount is provided, so when changing coolers the entire mainboard does not need to be removed from the case. The Tauron case has decoupled stand feet & delivery

Includes:: an extensive accessory set. In order to simplify the initial start-up of the case, a detailed instruction manual is available for download.

Features: ATX case 2x 5.25" drive bays (external) 1x 5.25" or 3.5" drive bays (external) 7x 2.5" or 3.5" bays with removable mounting trays for HDDs (internal) Top I/O: 2x USB3.0, 2x USB2.0 & 2x audio, power & reset button 7 slots for add-on cards Acrylic side panel Plastic front panel with air inlet, drive bay covers in mesh design Quick fasteners for optical drives, mainboard mounting with installation opening for CPU coolers 4 openings for water cooling Cable management system Interior painting Removable HDD brackets support long VGA cards up to 42 cm 2x fan speed controllers for up to 6 fans Dimensions: 510 x 205 x 495 mm (L x W x H) Weight: ~9.5kg Fan configuration: Case front 2x 120 mm LED fan (pre-installed) Rear panel 1x 120 mm fan (pre-installed) Top panel 1x 170 mm fan (pre-installed) @



...

The Tauron is a massive ATX format PC case & available in multiple color variations. There are two different versions in black but the mainboard mount, slot faceplates, hard drives installation bays, blades from the internal fans & the latches of the quick locking mechanisms are in a different color from the rest of the case, either toxic green or fiery red. Fittingly, the colorful elements on the inside is also coordinated with the illumination of both black versions: With the red version two 120 mm LED front fans the status LEDs are red, while in the green version these same elements are illuminated green. In addition, a completely white version of the Tauron is available which include blue illuminating front fans. Here the internal fans are equipped with white blades. The other key data of the individual variations are identical: The Tauron comes with an I/O panel located on the top of the case, which is protected by a cover. The I/O panel offers two USB3.0 ports as well as two audio & two USB2.0 ports. The USB2.0 & the audio ports connect directly to the mainboard, while the USB3.0 connects to an external USB3.0 interface either on the mainboard or a corresponding USB3.0 controller card. in addition, the Tauron’s I/O panel also has two fan controls. These two controls can regulate up to six case fans. With this, the airflow rate of the case can be quickly & easily adjusted to current conditions & individual demands. The entire structure of the case compliments the desire for proper cooling of the internal components. Two combined 120 mm fans in the front draw in cool air from the outside. A 120 mm fan on the rear side & a larger 170 mm fan on the ceiling blow the warm air out of the case. If that is not enough, the case also offers the option to install another 120 mm or 140 mm fan on the floor. The power supply has an autonomous cooling cycle: Cool air is supplied through the dust filter of the air intake on the case floor & blown out directly out through the rear of the case. In addition, air is drawn through inlets on the right side of the case which contributes to the cooling of the CPU & hard drives. The Tauron case has three hard drives cages, two of which are modular: They can be arranged, if necessary, to install long graphic cards up to a maximum length of 42 cm. The mounting of up to a maximum of seven 2.5" or 3.5" hard drives or Solid State Disks occurs through the decoupled installation bays. The hard drive cages allows up to three optical drives to be installed, with the lowest 5.25" drive bay offering the possibility to install a 3.5" drive bay. The installation of the optical drives & the 3.5" drive frame occur through the pre-installed quick locking mechanisms. The arrangement of cables on the inside occurs through our elaborate cable management system, in which the cables can be simply & cleanly stored behind the mainboard mount. This allows optimal airflow throughout the inside of the case. In addition to the cable feed through, a large hole for CPU coolers on the mainboard mount is provided, so when changing coolers the entire mainboard does not need to be removed from the case. The Tauron case has decoupled stand feet & delivery

Includes:: an extensive accessory set. In order to simplify the initial start-up of the case, a detailed instruction manual is available for download.

Features: ATX case 2x 5.25" drive bays (external) 1x 5.25" or 3.5" drive bays (external) 7x 2.5" or 3.5" bays with removable mounting trays for HDDs (internal) Top I/O: 2x USB3.0, 2x USB2.0 & 2x audio, power & reset button 7 slots for add-on cards Acrylic side panel Plastic front panel with air inlet, drive bay covers in mesh design Quick fasteners for optical drives, mainboard mounting with installation opening for CPU coolers 4 openings for water cooling Cable management system Interior painting Removable HDD brackets support long VGA cards up to 42 cm 2x fan speed controllers for up to 6 fans Dimensions: 510 x 205 x 495 mm (L x W x H) Weight: ~9.5kg Fan configuration: Case front 2x 120 mm LED fan (pre-installed) Rear panel 1x 120 mm fan (pre-installed) Top panel 1x 170 mm fan (pre-installed)



...