Phineas, Ferb, Agent P & Dr Doofenshmirtz feature on this very busy & colourful 100-piece puzzle. The two stepbrothers are planning another crazy scheme, & it looks like the evil doctor is trying to stop their fun. Agent P (otherwise known as Perry the Platypus) is on hand to help them thwart the cunning scientist. The puzzle is. Made from thick, strong board & measures 49 x 36cm. Approx once completed. A must for all Phineas & Ferb fans! ...

Panel Type: TFT-LCD Backlight Type: W-LED system Screen

Size: 23” Aspect Ratio: 16:9 Resolution: 1920

...

Phobya Cleaning kit: Only with a clean base is the new thermal compound capable of fully utilizing its potential! This high-tech cleaning fluid allows quick & efficient cleaning of processors & other computer chips. The Phobya cleaning kit reliably & thoroughly removes thermal compound & dirt whilst always remaining gentle to the surface being cleaned & does not scratch it. The use of the Phobya cleaning fluid is very easy: Moisten a clean paper cloth with the cleaning fluid & rub the surface to clean it quickly & effectively. This cleaning fluid is so gentle it can even be used to clean glasses! Use the Phobya cleaner to thoroughly clean the surface of coolers & chips to achieve maximum cooling performance! Features Residue-free removal of stains & old thermal compound Easy handling Gentle to the surface Improves cooling performance No scratching of the surface Alcohol free Colourless Resealable bottle Technical specifications

Material: Carbon dioxide, silicic acid & water

Colour: Transparent Content: 24g



...

With this 2-Pin Y-cable two components can be connected at once. This Y-cable can be used for different applications, such as the system speaker or Reset- or power button. Technical specifications: Connector: 2-Pin to 2x 2-Pin

Colour: Black Dimensions: Overall length 30cm, split after 15cm Conforms with Ro HS

...

Phobya 4 Pin Molex to 6x 3 Pin Fan Splitter PCB Phobya fan splitter, a central distributor piece for your cooling system! Especially in systems with many fans, or large radiators which require many fans, it is often a hassle that all of these fans have to be connected with long & messy cables. Here the Phobya 4-Pin Molex to 6x 3-Pin Splitter comes in very handy & allows clean cable management. The central connection point even improves performance, as the cooling air can flow through the system with less resistance. A Velcro mat & a suitable spot to stick it, this splitter can even be installed upside down at virtually any place in your enclosure. Technical specifications:

Material: Plastic

Colour: Black

Dimensions (Lx Wx H): 45 x 25 x 18mm Power connection: 4-Pin Molex Fan connectors: 6x 3-Pin





...

Phobya ATX-bridging plug (24 Pin)
- black Whoever has installed a watercooling system knows the problem: How to fill the system
...

Phobya Balancer 150 black nickel Another innovative component for your watercooling system by Phobya! The newest innovations combined with exclusive appearance & proven functionality. Design & technology are the main points which make the difference in the watercooling sector. Many manufacturers are trying to combine excellence in both sector, but only few succeed. Phobya has managed to combine features which are unique in the watercooling sector. The top & bottom are made from solid metal & combined with a transparent tube made from Plexi. Shining gold plating, silver or a black nickel finish are the first available colours. The reservoirs are available in 150mm, 250mm & 450mm length, allowing use in virtually any case size. The reservoir is shipped with two black mounts with safety latch. These mounting clips have a foam plastic sheet at their inside to protect the Plexi of the reservoir. Versatility & functionality were a great factor when designing this reservoir. You will notice the large number of connection threads, two at the bottom & two at the side of the bottom piece, which allows a great variety of mounting possibilities. The threads at the side especially make horizontal installation of the reservoir easily possible, giving you a whole array of new possibilities. The fifth connection thread in the top piece can be used as an In- our outlet when installed horizontally or for connection of a Fillport etc. Another possibility is to equip the unused threads with lighting modules to shine a whole new light on your reservoir! Of course an '' Anti-cyclone'' was integrated. This separating plate prevents vortexing inside of the reservoir & also prevents stronger pumps to suck in air bubbles from the inlet. Of course all connection threads in the reservoir are 1/4" in size. Thee nickel plated screw plugs are included for the unused threads. Both bottom & top piece may be removed for cleaning of the tube. All mounting material is also included! Technical specifications:

Material: Brass, Plexi

Colour: Black nickel coated

Dimensions (Dx H): 50 x 150mm Connection threads: 4x 1/4" in bottom piece, 1x 1/4" in top piece Weight: 517g + 2x 30g mounting clamps Pressure tested: 2 bar
Colour: Black nickel Connector: G1/4" inner thread Dimensions: 50 x 50 x 150mm Fillport: G1/4" inner thread LED hole: Not available

Material: POM, brass Model of reservoir: Tubing
- reservoirs 50mm Number of connections: 4 Preinstalled pump: No Pump compatibility: For flow pumps









...

Another innovative component for your watercooling system by Phobya! The newest innovations combined with exclusive appearance & proven functionality. Design & technology are the main points which make the difference in the watercooling sector. Many manufacturers are trying to combine excellence in both sector, but only few succeed. Phobya has managed to combine features which are unique in the watercooling sector. The top & bottom are made from solid metal & combined with a transparent tube made from Plexi. Shining gold plating, silver, black matt or a black nickel finish are the first available colours. The reservoirs are available in 150mm, 250mm & 450mm length, allowing use in virtually any case size. The reservoir is shipped with two black mounts with safety latch. These mounting clips have a foam plastic sheet at their inside to protect the Plexi of the reservoir. Versatility & functionality were a great factor when designing this reservoir. You will notice the large number of connection threads, two at the bottom & two at the side of the bottom piece, which allows a great variety of mounting possibilities. The threads at the side especially make horizontal installation of the reservoir easily possible, giving you a whole array of new possibilities. The fifth connection thread in the top piece can be used as an In- our outlet when installed horizontally or for connection of a Fillport etc. Another possibility is to equip the unused threads with lighting modules to shine a whole new light on your reservoir! Of course an '' Anti-cyclone'' was integrated. This separating plate prevents vortexing inside of the reservoir & also prevents stronger pumps to suck in air bubbles from the inlet. Of course all connection threads in the reservoir are 1/4" in size. Thee nickel plated screw plugs are included for the unused threads. Both bottom & top piece may be removed for cleaning of the tube. All mounting material is also included! Technical specifications:

Material: Brass, Plexi

Colour: Black matt

Dimensions (Dx H): 50 x 150mm Connection threads: 4x 1/4" in bottom piece, 1x 1/4" in top piece Weight: 517g + 2x 30g mounting clamps Pressure tested: 2 bar





...

Phobya Balancer 250 black nickel Another innovative component for your watercooling system by Phobya! The newest innovations combined with exclusive appearance & proven functionality. Design & technology are the main points which make the difference in the watercooling sector. Many manufacturers are trying to combine excellence in both sector, but only few succeed. Phobya has managed to combine features which are unique in the watercooling sector. The top & bottom are made from solid metal & combined with a transparent tube made from Plexi. Shining gold plating, silver or a black nickel finish are the first available colours. The reservoirs are available in 150mm, 250mm & 450mm length, allowing use in virtually any case size. The reservoir is shipped with two black mounts with safety latch. These mounting clips have a foam plastic sheet at their inside to protect the Plexi of the reservoir. Versatility & functionality were a great factor when designing this reservoir. You will notice the large number of connection threads, two at the bottom & two at the side of the bottom piece, which allows a great variety of mounting possibilities. The threads at the side especially make horizontal installation of the reservoir easily possible, giving you a whole array of new possibilities. The fifth connection thread in the top piece can be used as an In- our outlet when installed horizontally or for connection of a Fillport etc. Another possibility is to equip the unused threads with lighting modules to shine a whole new light on your reservoir! Of course an '' Anti-cyclone'' was integrated. This separating plate prevents vortexing inside of the reservoir & also prevents stronger pumps to suck in air bubbles from the inlet. Of course all connection threads in the reservoir are 1/4" in size. Thee nickel plated screw plugs are included for the unused threads. Both bottom & top piece may be removed for cleaning of the tube. All mounting material is also included! Technical specifications:

Material: Brass, Plexi

Colour: Black nickel coated

Dimensions (Dx H): 50 x 250mm Connection threads: 4x 1/4" in bottom piece, 1x 1/4" in top piece Weight: 816g + 2x 30g mounting clamps Pressure tested: 2 bar
Colour: Black Connector: G1/4" inner thread Dimensions: 50 x 50 x 250mm Fillport: G1/4" inner thread LED hole: Not available

Material: POM, brass Model of reservoir: Tubing
- reservoirs 50mm Number of connections: 4 Preinstalled pump: No Pump compatibility: For flow pumps









...

Phobya 24 Pin 2-way PSU starting cable (2x 24pin to 1x 24pin)
- individual sleeving
- black This cable permits operation of

...