Kingstons KHX24C11T1K2/8X is a kit of two 512M x 64-bit (4GB) DDR3-2400 CL11 SDRAM (Synchronous DRAM), 2 Rx 8 memory modules, based on sixteen 256M x 8-bit FBGA components per module. Each module kit supports Intel XMP (Extreme Memory Profiles). Total kit capacity is 8GB. Each module kit has been tested to run at DDR3-2400 at a low latency timing of 11-13-13 at 1.65V. The SPDs are programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers. Features JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply VDDQ = 1.5V (1.425V ~ 1.575V) 667 M Hz f CK for 1333 Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 9, 8, 7, 6 Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock Programmable CAS Write Latency (CWL) = 7 (DDR3-1333) 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C Asynchronous Reset PCB: Height 2.401” (61.00mm) w/ heatsink, double sided component Specifications CL (IDD): 9 cycles Row Cycle Time (t R Cmin): 49.5ns (min.) Refresh to Active/ Refresh: 160ns (min.) Row Active Time (t RASmin): 36ns (min.) Maximum Operating Power: 2.400 W* (per module) UL Rating: 94 V
- 0 Operating Temperature: 0oC to 85oC Storage Temperature: -55oC to +100oC


...

Designed with the gamer & PC enthusiast in mind, its dual 60mm fans optimize airflow around the modules to help memory run at peak performance for longer periods of time. The fan is made from anodized aluminum in the same familiar blue color as the Hyper X heat spreaders. When turned on, the fan blades are illuminated by eight small blue LEDs. Features Whisper-quiet — 28d B Am maximum 12V rated. 8V 13.5V operational range RPM: 3000 +/- 10% Dual 60mm fans for optimum airflow Fan blades illuminated by eight small blue LEDs when turned on 1 Year Manufacturer Warranty Specifications
Colours: blue & black Dimensions: 5.68” x 2.75” x 2.16” Rate voltage: 12 VDC Operational: voltage 8-13.5 VDC Input power: 1.08 watt Operation voltage: 8-13.5VDC RPM: 3000±10% Acoustical noise: 25 (28 max.) d B-A
...

Kingston's KHX18C11P1K2/16 is a kit of two 1G x 64-bit (8GB) DDR3-1866 CL11 SDRAM (Synchronous DRAM) 2 Rx 8 memory modules, based on sixteen 512M x 8-bit DDR3 FBGA components per module. Total kit capacity is 16GB. Each module kit has been tested to run at JEDEC DDR3-1866 at a low latency timing of 11-11-11 at 1.5V. Additional timing parameters are shown in the Pn P Timing Parameters section. Each 240-pin DIMM uses gold contact fingers & requires +1.5V. ...

The Kingston Hyper X Fan is specially designed to keep Kingston Hyper X memory running cool This unit consists of two 60mm fans to help cool off your RAM in extreme situations. It has two side panels that attach to the motherboard & are attached to the frame with 4 thumb screws. The Hyper X Fan is made from anodized aluminum & is the same familiar blue color as the Hyper X heatspreaders. When turned on, the fan blades are illuminated by eight small blue LEDs. Power use is minimal & noise is not an issue as the fan runs at a whisper-quiet 25 d BA The fan is available as a standalone or bundled with Kingston’s 6GB 2000- & 1800 M Hz triple-channel memory kits with the T1 heatspreaders for Intel Core i 7 systems. The Hyper X fan comes with a one-year warranty & free round the clock technical support. Specifications Fans = 2 x 60mm Noise = 28d BA max LEDs = 2 Blue ...

- Product Description: Kingston Hyper X Predator
- solid state drive
- 960 GB
- PCI Express 2.0 x 4
- Type: Solid state



...

Kingstons Industrial micro SD card is designed & tested to withstand the most demanding environmental factors. With an operating temperature of
- 40°C to 85°C, it can operate normally even in extreme desert heat & sub- zero conditions. The card utilises industry-leading p SLC mode to provide top transfer speeds of up to 100MB/s*. It is rated up to 1920 TBW2 with 30K P/E cycles & has a built-in feature set specific to endurance, performance & industrial needs. Kingstons Industrial micro SD ships with a UHS-I SD adapter & is available in capacities from 8GB-64GB*** Durable in extreme temperatures High endurance UHS-I Speed Class U3, V30, A1 Industrial-grade built-in features
...

Kingston’s Industrial micro SD card is designed & tested to withstand the most demanding environmental factors. With an operating temperature of
- 40°C to 85°C, it can operate normally even in extreme desert heat & sub- zero conditions. The card utilises industry-leading p SLC mode to provide top transfer speeds of up to 100MB/s*. It is rated up to 1920 TBW2 with 30K P/E cycles & has a built-in feature set specific to endurance, performance & industrial needs. Durable in extreme temperatures High endurance UHS-I Speed Class U3, V30, A1 Industrial-grade built-in features
...

Kingston’s Industrial micro SD card is designed & tested to withstand the most demanding environmental factors. With an operating temperature of
- 40°C to 85°C, it can operate normally even in extreme desert heat & sub- zero conditions. The card utilises industry-leading p SLC mode to provide top transfer speeds of up to 100MB/s*. It is rated up to 1920 TBW2 with 30K P/E cycles & has a built-in feature set specific to endurance, performance & industrial needs. Kingston’s Industrial micro SD ships with a UHS-I SD adapter & is available in capacities from 8GB-64GB*** Durable in extreme temperatures High endurance UHS-I Speed Class U3, V30, A1 Industrial-grade built-in features
...

Kingston’s Industrial micro SD card is designed & tested to withstand the most demanding environmental factors. With an operating temperature of
- 40°C to 85°C, it can operate normally even in extreme desert heat & sub- zero conditions. The card utilises industry-leading p SLC mode to provide top transfer speeds of up to 100MB/s*. It is rated up to 1920 TBW2 with 30K P/E cycles & has a built-in feature set specific to endurance, performance & industrial needs. Kingston’s Industrial micro SD ships with a UHS-I SD adapter & is available in capacities from 8GB-64GB*** Durable in extreme temperatures High endurance UHS-I Speed Class U3, V30, A1 Industrial-grade built-in features
...

Available in Standard & Managed models Kingston’s Iron Key TM D300 USB (Universal Serial Bus) Flash drive features an advanced level of security that builds on the features that made Iron Key well-respected to safeguard sensitive information. It’s FIPS 140-2 Level 3 certified, with 256-bit AES hardware encryption in XTS mode. For added peace of mind, the drive uses digitally signed firmware, making it immune to Bad USB (Universal Serial Bus), & it enforces complex password protection 1 with minimum characteristics to prevent unauthorised access. Encryption & decryption is done on the drive, with no trace left on the host system, & the drive locks down & reformats after 10 invalid attempts to protect against brute force attacks. All models Rugged & secure, Iron Key D300 has a zinc casing & tamper-evident epoxy seal for physical security, so you can rest assured the drive will hold up, even in the most demanding situations. It’s customisable, easy to use & waterproof up to 4 feet, conforming to IEC 60529 IXP82. Super Speed (USB 3.0) technology means that you don’t have to compromise speed for security; Iron Key D300 allows for fast data transfers, & by adding Kingston’s expertise in Flash memory & the latest in NAND Flash & controller technology, you can be confident in a solution that will be around for years to come. Advanced level of security that builds on the features that made Iron Key well-respected Available in a Managed model that requires Iron Key EMS by Data Locker 3 Rugged & secure casing that meets Iron Key standards Fast data transfers that use the latest in NAND Flash & controller technology Customizable Easy to use ...