PCIe* Performance at an Affordable Price Empowered by Intel’s innovative Intel QLC Technology, the Intel SSD 660p o&64256;ers higher capacities at a lower cost than TLC-based options.1 With PCIe*, the new SSD 660p skips SATA & its limitations to o&64256;er up to 2TB in one drive. Twice the Capacity in Identical Footprints These client SSDs pack more data than TLC-based storage, allowing up to 2x more capacity in identical footprints. The thin M.2 80mm form factor makes it perfect for notebooks, desktops, & mobile devices that need storage for everyday computing. Performance & Price That Matters The SSD 660p hits the marks that matter for client SSDs. This drive is tuned to deliver a capacity optimized NVMe* performance & deliver an intelligent storage option for mainstream & entry-level computing. Specifications Capacity 1.02TB Lithography Type 3D2 QLC Sequential Read (up to) 1800 MB/s Sequential Write (up to) 1800 MB/s Random Read (8GB Span) (up to) 150000 IOPS Random Write (8GB Span) (up to) 220000 IOPS Power
- Active 0.1 W Power
- Idle 0.040W Vibration
- Operating 2.17 GRMS Vibration
- Non-Operating 3.13 GRMS Shock (Operating & Non-Operating) 1000 G Endurance Rating (Lifetime Writes) 200 TBW Mean Time Between Failures (MTBF) >= 1.6 million hours Uncorrectable Bit Error Rate (UBER) <1 sector per 10^15 bits read Warranty Period: 5 Years Advanced Technologies Enhanced Power Loss Data Protection No Hardware Encryption AES 256 bit High Endurance Technology (HET) No Temperature Monitoring & Logging No End-to-End Data Protection Yes Intel Smart Response Technology Yes Intel Remote Secure Erase No Intel Rapid Start Technology Yes



...

. rpd-row { overflow: hidden; padding: 30px 0; border-bottom: 1px solid eee; }. rpd-row h 3 { font-
Size:22px; }. rpd-row
...

PCIe* Performance at an Affordable Price Empowered by Intel’s innovative Intel QLC Technology, the Intel SSD 660p o&64256;ers higher capacities at a lower cost than TLC-based options.1 With PCIe*, the new SSD 660p skips SATA & its limitations to o&64256;er up to 2TB in one drive. Twice the Capacity in Identical Footprints These client SSDs pack more data than TLC-based storage, allowing up to 2x more capacity in identical footprints. The thin M.2 80mm form factor makes it perfect for notebooks, desktops, & mobile devices that need storage for everyday computing. Performance & Price That Matters The SSD 660p hits the marks that matter for client SSDs. This drive is tuned to deliver a capacity optimized NVMe* performance & deliver an intelligent storage option for mainstream & entry-level computing. Specifications Performance Sequential Read (up to) 1800 MB/s Sequential Write (up to) 1800 MB/s Random Read (8GB Span) (up to) 220000 IOPS Random Write (8GB Span) (up to) 500000 IOPS Power – Active 0.1 W Power
- Idle 0.040W Reliability Vibration – Operating 2.17 GRMS Vibration
- Non-Operating 3.13 GRMS Shock (Operating & Non-Operating) 1000 G Endurance Rating (Lifetime Writes) 200 TBW Mean Time Between Failures (MTBF) >= 1.6 million hours Uncorrectable Bit Error Rate (UBER) <1 sector per 10^15 bits read Warranty Period 5 Package Specifications Weight <10 grams Form Factor M.2 22 x 80mm Interface PCIe NVMe 3.0 x 4 Advanced Technologies Enhanced Power Loss Data Protection No Hardware Encryption AES 256 bit High Endurance Technology (HET) No Temperature Monitoring & Logging No End-to-End Data Protection Yes Intel Smart Response Technology Yes Intel Remote Secure Erase No Intel Rapid Start Technology Yes

...

. rpd-row { overflow: hidden; padding: 30px 0; border-bottom: 1px solid eee; }. rpd-row h 3 { font-
Size:22px; }. rpd-row
...

. rpd-row { overflow: hidden; padding: 30px 0; border-bottom: 1px solid eee; }. rpd-row h 3 { font-
Size:22px; }. rpd-row
...

Intel 730 Series 240GB 2.5in SATA 6 Gb/s SSD Specifications Essentials Capacity 240 GB Lithography Type 20nm Performance Sequential Read (up to) 550 MB/s Sequential Write (up to) 270 MB/s Random Read (8GB Span) (up to) 86000 IOPS Random Write (8GB Span) (up to) 56000 IOPS Latency
- Read 50 µs Latency
- Write 60 µs Power
- Active 3.8W Power
- Idle 1.5W Reliability Vibration
- Operating 2.17 GRMS (5-700 Hz) Max Vibration
- Non-Operating 3.13 GRMS (5-800 Hz) Max Shock (Operating & Non-Operating) 1, 000 G (Max) at 0.5 msec Operating Temperature Range 0°C to 70°C Endurance Rating (Lifetime Writes) 50GB Writes/ Day Mean Time Between Failures (MTBF) 2, 000, 000 Hours Uncorrectable Bit Error Rate (UBER) <1 sector per 10^17 bits read Warranty Period 5 yrs Package Specifications Weight 72 grams ± 2 grams Form Factor 2.5" 7mm Interface SATA 3.0 6 Gb/S Advanced Technologies Enhanced Power Loss Data Protection No Hardware Encryption AES 256 bit – High Endurance Technology (HET) No Temperature Monitoring & Logging Yes End-to-End Data Protection No





...

Performance Unleashed Performance optimized 3rd Generation Intel controller with Intel Data Center DNA The Intel Solid-State Drive 730 Series delivers uncompromised performance by combining factory tuned components with Data Center DNA. Maximize your computing experience with the Intel SSD 730 Series built with a specially qualified 3rd generation Intel controller, 20nm NAND & optimized firmware. Intel has taken storage a step further by factory overclocking these components to push the limits of performance with a 50% increase in controller speed & 20% increase in NAND bus speed. Intel SSD 730 Series are optimized for the most demanding tasks including digital content creation, video capture/editing, extreme gaming & other client usages where storage performance improves the user’s experience & efficiency. Applications will benefit from the 50µs read latency, up to 550MB/s sequential reads & 89, 000 IOPs random reads. 730 Series + Intel Rapid Storage Technology = Amazing Performance Digital Content Creation experts & PC Enthusiasts know the highest storage performance is achieved with RAID-0 configurations as SSDs saturate the SATA interface. Comparing two 730 Series drives in a RAID-0 array to a single alternative SSD, results in the same capacity & nearly double the performance. As shown below, two 730 Series drives in a RAID-0 configuration can provide throughput numbers exceeding 1000MB/s when coupled with Intel platforms supporting Intel Rapid Storage Technology. Similarly four 730 Series drives in a RAID-0 array with an Intel chipset based platform can provide performance exceeding 1500MB/s. ...

Performance Unleashed Performance optimized 3rd Generation Intel controller with Intel Data Center DNA The Intel Solid-State Drive 730 Series delivers uncompromised performance by combining factory tuned components with Data Center DNA. Maximize your computing experience with the Intel SSD 730 Series built with a specially qualified 3rd generation Intel controller, 20nm NAND & optimized firmware. Intel has taken storage a step further by factory overclocking these components to push the limits of performance with a 50% increase in controller speed & 20% increase in NAND bus speed. Intel SSD 730 Series are optimized for the most demanding tasks including digital content creation, video capture/editing, extreme gaming & other client usages where storage performance improves the user’s experience & efficiency. Applications will benefit from the 50µs read latency, up to 550MB/s sequential reads & 89, 000 IOPs random reads. 730 Series + Intel Rapid Storage Technology = Amazing Performance Digital Content Creation experts & PC Enthusiasts know the highest storage performance is achieved with RAID-0 configurations as SSDs saturate the SATA interface. Comparing two 730 Series drives in a RAID-0 array to a single alternative SSD, results in the same capacity & nearly double the performance. As shown below, two 730 Series drives in a RAID-0 configuration can provide throughput numbers exceeding 1000MB/s when coupled with Intel platforms supporting Intel Rapid Storage Technology. Similarly four 730 Series drives in a RAID-0 array with an Intel chipset based platform can provide performance exceeding 1500MB/s. ...

Performance Unleashed Performance optimized 3rd Generation Intel controller with Intel Data Center DNA The Intel Solid-State Drive 730 Series delivers uncompromised performance by combining factory tuned components with Data Center DNA. Maximize your computing experience with the Intel SSD 730 Series built with a specially qualified 3rd generation Intel controller, 20nm NAND & optimized firmware. Intel has taken storage a step further by factory overclocking these components to push the limits of performance with a 50% increase in controller speed & 20% increase in NAND bus speed. Intel SSD 730 Series are optimized for the most demanding tasks including digital content creation, video capture/editing, extreme gaming & other client usages where storage performance improves the user’s experience & efficiency. Applications will benefit from the 50µs read latency, up to 550MB/s sequential reads & 89, 000 IOPs random reads. 730 Series + Intel Rapid Storage Technology = Amazing Performance Digital Content Creation experts & PC Enthusiasts know the highest storage performance is achieved with RAID-0 configurations as SSDs saturate the SATA interface. Comparing two 730 Series drives in a RAID-0 array to a single alternative SSD, results in the same capacity & nearly double the performance. As shown below, two 730 Series drives in a RAID-0 configuration can provide throughput numbers exceeding 1000MB/s when coupled with Intel platforms supporting Intel Rapid Storage Technology. Similarly four 730 Series drives in a RAID-0 array with an Intel chipset based platform can provide performance exceeding 1500MB/s. ...

Intel 750 Series 1.2TB PCI-E 3.0 SSD The Intel SSD 750 series is Intel's first PCIe Gen 3 x 4 SSD developed for the client enthusiast & workstation markets. The Intel SSD 750 series is architected with the high performance controller interface
- Non-Volatile Memory Express (NVMe)
- delivering outstanding performance, low latency & Quality of Service. NVMe is a standardized interface that enables higher performance & lower latency than previous generations. The Intel SSD 750 series is Intel's highest performing client drive specifically designed for the PC enthusiast & workstation systems with demanding storage workstation requirements. With PCIe Gen 3 x 4 support & NVMe queuing interface, the Intel SSD 750 series delivers excellent sequential read performance of up to 2.4 GB/s & sequential write speeds of up to 1.2 GB/s. The Intel SSD 750 series delivers random read IOPS of up to 440K & random write IOPS of up to 290K for 4 KB operations. Also, by taking advantage of the direct path from the storage to the CPU by means of NVMe, the Intel SSD 750 series exhibits low latency of less than 20 μs for sequential access to the SSD. Specifications: General: Device Type: Solid state drive
- internal Capacity: 1.2 TB NAND Flash Memory Type:20nm multi-level cell (MLC) Interface: PCI Express 3.0 x 4 (NVMe)

Features: Read Unrecoverable Bit Error Rate (UBER) 10e-16, Temperature Monitoring & Logging, Enhanced Power Loss Data Protection, half-height half-length form-factor, S.M.A.R.T.

Width: 1.874 cm

Depth: 16.765 cm

Height: 6.89 cm Weight: 195 g Performance: SSD Endurance: 2.19 PB Internal Data Rate: 2500 MBps (read) / 1200 MBps (write) 4KB Random Read: 460000 IOPS 4KB Random Write: 290000 IOPS Reliability MTBF: 1, 200, 000 hours Non-Recoverable Errors: 1 per 10^16 Expansion & Connectivity Interfaces: 1 x PCI Express 3.0 x 4 (NVMe) Power: Power Consumption: 22 Watt (write ) 10 Watt (read ) 4 Watt (idle ) Software & System Requirements: OS Required: Microsoft Windows 7 / Windows 8 / Windows 8.1 (64 bits) Miscellaneous: Compliant Standards: UL, VCCI, C-Tick, BSMI, WHQL, Ro HS, KCC, WEEE, EN 60950-1 Second Edition, CEM, EN55022:2010, EN55024:2010, EN 61000-4-2:95, EN 61000-4-3:96, EN 61000-4-4:95, EN 61000-4-5:95, EN 61000-4-6:97, EN 61000-4-11:94, ENV 50204:95, ICES-003 issue 4, WHCK Manufacturer Warranty: Service & Support: 5 years warranty Service & Support

Details: Limited warranty
- 5 years Environmental Parameters: Min Operating Temperature: 0 °C Max Operating Temperature: 55 °C Humidity Range Operating: 5
- 95% Shock Tolerance (operating): 50 g Shock Tolerance (non-operating): 50 g Vibration Tolerance (operating): 2.17 g @ 5-700 Hz Vibration Tolerance (non-operating): 3.13 g @ 5-800 Hz














...