Designed For Pro Liant BL420c Gen 8, BL460c Gen 8, BL465c Gen 8, BL660c Gen 8, BL660c Gen 8 Performance, WS460c Gen 9 Graphics, WS460c Gen 9 Graphics Expansion ...

The HPE Ethernet 10 Gb 2-port 560SFP+ Adapter features the latest Intel 82599 controller. It is a low-cost, low-power dual port PCIe v 2.0 x 8 adapter designed for HPE Pro Liant Gen 8 & select G7 ML/DL/SL servers. The HPE 560SFP+ addresses the demanding needs of the next-generation data center by providing unmatched features for virtualization & scalability that complement the HPE Gen 8 server platform. The HPE 560SFP+ comes with both low profile & standard brackets & has two SFP+ cages that enable connections with DACs as well as SR fiber optic modules. It is SR-IOV ready & supports high performance networking features such as VLAN tagging, low latency interrupts, TCP & UDP checksum offloading, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), jumbo frames, & PXE boot. ...

The HP Ethernet 10 Gb 2-port 561 FLR-T Flexible LOM adapter features the latest generation 10 Gb E Intel Ethernet Controller X540. The HP 561FLR-T is a low-cost, low-power, dual port 10GBASE-T adapter designed for use in HP Pro Liant Gen 8 rack, tower & scalable servers. The HP 561FLR-T addresses the demanding needs of the next-generation data center by providing unmatched features for virtualization, scalability to keep up with the HP Pro Liant Gen 8 server platform, with proven & reliable performance HP customers have come to expect. The HP 561FLR-T adapter enables connections with standard CAT6 cabling. The HP 561FLR-T supports high performance networking features such as VLAN tagging, Low latency interrupts, TCP & UDP checksum offloading, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), WOL, jumbo frames, PXE boot & virtualization features & is VMDq & SR-IOV ready. What's new 10 G Base-T technology Supports IEEE 1588 (Time Stamping) & Time synchronization (802.1AS) RJ-45 ports for twisted pair cabling utilizing CAT 6A or better Features Dual-port 10 Gb Ethernet PCIe Gen Flexible LOM adapter designed for maximum network performance. 20 Gbps full duplex Ethernet transfer rate per port Intel Virtualization Technology for Connectivity (VT-c) with VMDq & SR-IOV supports VMware Net Queue & Microsoft VMQ helping to meet the performance demands of consolidated virtual workloads Supports Wake-on-LAN (WOL) at 1 Gb, has PXE, MSI-X support, Teaming, IPv 6 Adapter supports HP Sea of Sensors 3D Technology New Intel Data Direct I/O technologies reduces system power, increases I/O performance & reduces I/O latency. ...

The HPE 561T is a low cost, low power dual-port 10 G Base-T adapter designed for use in HP Pro Liant Gen 8 rack, tower, & scalable servers. The HP 561T addresses the demanding needs of the data center by providing unmatched features for virtualization, & scalability to keep up with the HPE Pro Liant Gen 8 server platform, with proven & reliable performance HPE customers have come to expect. The HPE 561T adapter enables connections with standard CAT6 or better UTP cabling. The HPE 561T supports high performance networking features such as VLAN tagging, low latency interrupts, TCP & UDP checksum offloading, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), WOL, jumbo frames, PXE boot & virtualization features which are VMDq & SR-IOV ready. ...

Do you require SDN features, low-latency & high-bandwidth in your data center? The HPE Ethernet 10 Gb 2-port 562FLR-SFP+ adapter offers the latest SDN features in a Flexible LOM form factor. The HPE 562FLR-SFP+ is a feature rich, low power dual port PCIe v 3.0 x 8 lane adapter designed for use in HPE Pro Liant Gen 9 Rack & Density Optimized servers. ...

The HPE Ethernet adapters deliver high performance & low latency for Ethernet traffic to & from the server with minimal CPU resources required. Processing of I/O packets on the adapter frees up CPU to do other more important tasks. ...

The HP Ethernet 1 Gb 4-port 331FLR offering in a single chip solution on a flexible LOM form factor, further reducing power requirements for 4 ports of 1 Gb Ethernet. It is designed for use with select HP Pro Liant Gen 8 Rack servers. The HP 331FLR quad-port Flex LOM delivers full line-rate performance across all ports with low power consumption. The HP 331FLR quad-port design is ideal for server virtualization, security, server consolidation, network segmentation, and other applications requiring maximum throughput & port density. The total aggregate throughput of 4 Gb meets the needs for customers desiring high bandwidth. ...

The HPE 366M is a PCIe 2.1 quad-port 1 Gb Ethernet mezzanine network adapter for select HP Pro Liant Blade System c-Class Gen 8 servers. The total aggregate throughput of 4 Gbps meets the needs of customers wanting high bandwidth but not yet ready to move to 10 Gigabit Ethernet. Other features supported on the HPE 366M include RSS, PXE, checksum offload, VLAN, jumbo frames, i SCSI acceleration & i SCSI remote boot. ...

Need a low cost, low power 1 Gb E adapter for your HPE Pro Liant Gen 9 server? The HPE Ethernet 1 Gb 4-port 366T Adapter features a single chip solution, further reducing power requirements for 4 ports of 1 Gb Ethernet. The HPE 366T is PCI Express 2.1 x 4 based on the latest Intel Ethernet Controller I350 designed for use with select HPE Pro Liant Gen 9 rack, tower & density optimized servers. ...

The HPE Ethernet 1 Gb 4-port 331FLR offering in a single chip solution on a flexible LOM form factor, further reducing power requirements for 4 ports of 1 Gb Ethernet. It is designed for use with select HPE Pro Liant Gen 8 Rack servers. The HPE 331FLR quad-port Flex LOM delivers full line-rate performance across all ports with low power consumption. The HP 331FLR quad-port design is ideal for server virtualization, security, server consolidation, network segmentation, & other applications requiring maximum throughput & port density. ...