The HP NC373F is a high performance PCI Express multifunction network adapter that supports standard or low profile slots in Pro Liant servers running over a fiber-optic network environment. The NC373F is a four lane (x 4) serial device with 92KB of onboard memory. In addition to delivering Gigabit Ethernet networking, the NC373F supports TOE (TCP/IP Offload Engine), i SCSI (Internet Small Computer System Interface), & RDMA (Remote Direct Memory Access) over a single network connection. The NC373F ships with all the advanced server features that Pro Liant customers have come to expect, such as support for failover & load balancing, Pre-Boot Execution Environment (PXE), jumbo frames, large send offload, & multiple VLAN tagging. Please note: server components such as memory & power supplies must match those already installed in a server. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The HP Smart Array P212 is HP's entry level PCI Express (PCIe) Serial Attached SCSI (SAS) Raid controller. The low profile, half height card has 8 ports & utilizes DDR2-800 memory. The P212 is ideal for RAID 0, 1, 1+0, & can be upgraded with 256 MB cache module for RAID 5, 5+0. Please note: server components such as memory & power supplies must match those already installed in a server. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The HP NC112T is a low-priced Gigabit Ethernet server adapter that features single-port, copper, single lane (x 1) PCI Express capability, with 32KB onboard memory that provides 10/100/1000T auto-negotiated speed & duplex. It makes use of the Intel 82574L silicon & is suitable for both standard & low profile slots. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Designed for the c-Class Blade System enclosure, the HP Gb E2c Layer 2/3 Ethernet Blade Switch (Gb E2c Layer 2/3) provides a full set of Layer 2 switching & Layer 3 routing features, sixteen internal downlinks, five uplinks & two internal cross-connects in a single low cost blade switch. Four of the five uplinks can be either copper or fiber using optional SFP fiber modules. The HP Gb E2c Layer 2/3 Switch dramatically reduces cabling, power & cooling requirements compared to external st&-alone switches, allowing you to realize the full benefits of the HP c-Class Blade System. The HP Gb E2c Layer 2/3 Ethernet Blade Switch builds on the heritage of the Gb E2 switch family by delivering on-going enhancements such as a new "industry standard" CLI, Layer 3 routing, high availability features & SFP Fiber uplink ports. Along with simplified management, wire-speed performance, redundant path capabilities & HPs world-class service & support, the HP Gb E2c Layer 2/3 Ethernet Blade Switch remains the price/performance leader of all blade switches. Please note: server components such as memory & power supplies must match those already installed in a server. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The NVIDIA Ge Force GT630 DP (2GB) PCIe x 16 Card Graphics Card provides a full height, PCI Express x 16 graphics add-in card solution based on the NVIDIA Kepler Architecture GPU. The card is designed to support three display connections through its DVII, & two Display Port connectors Unprecedented flexibility for new applications & enhanced performance Support for NVIDIA surround technology Run multiple displays from a single graphics card Full 16 lane PCIe Generation 3 bus support with peak bandwidth support Wireless Display ready for future support Technical Information
-
- Host Interface
- PCI Express x 16
- RAMDAC Speed
- 400 MHz
- Maximum Resolution
- 2048 x 1536
- Digital Signal
- Yes Processor & Chipset
- Chipset Manufacturer
- NVIDIA
- Chipset Line
- Ge Force
- Chipset Series
- GTX 600
- Chipset Model
- GTX 630 Memory
- Standard Memory
- 2 GB
- Memory Technology
- GDDR3 SDRAM
- Bus Width
- 128 bit Interfaces/ Ports
- Host Interface
- PCI Express x 16
- Display Port
- Yes
- Number of Display Port Outputs
- 2
- DVI
- Yes
- Number of DVI Outputs
- 1 Physical Characteristics
- Form Factor
- Plug-in Card Miscellaneous
- Platform Supported
- PC




































...

The ML350p Gen 8 supports up to 3 graphic cards. HP Graphic Card Support Kit (660582-B21) will be required per Graphic Card HP 3rd Graphic Card Power Cable FIO Kit (700835-B21) will be an additional request for the 3rd graphics card support NOTE: Please see the HP Power Advisor for estimated power consumption of your individual system configuration prior to installing GPUs. ...

The most powerful HP thin client, the gt 7725 Thin Client is designed for businesses that require superior processing power & rich multimedia functionality with all the ease & familiarity of a traditional thin client. Processor AMD Turion dual-core 2.30 GHz Memory 2GB DDR SDRAM Flash Drive 1GB Flash Optical Drive None Software Operating system: HP Thin Pro GT HP Device Manager, Altiris Deployment Solution (full license DS 6.9 SP1), HP Thin State included with each thin client Display Monitor Not Included Graphics ATI Radeon HD 3200 graphics Also
Includes:: ATI Fire MV 2250 (PCI Express x 16), DMS-59 x 2 dual DVI-I (via splitter cable, included) Audio Output: Internal amplified speaker, 1/8-inch mini, full 16-bit stereo, 44-k Hz sample rate; Input: 1/8-inch mini microphone Networking LAN: 10/100/1000 Gigabit Ethernet, twisted pair (RJ-45), TCP/IP with Dynamic DNS & DHCP support, Point-to-Point Protocol (PPP), Direct Connection through RS-232, Wake on LAN (WOL), PXE Power Supply / Requirements Operating voltage range: 100-240 VAC; Rated line frequency: 50-60 Hz; Power output (max): 120 W; Rated output current (max): 6.15A; Output voltage: +19V DC; Power consumption: Average power consumption of this thin client in a typical setup is 61W

Dimensions Width 4.57 cm Depth 21.51 cm Height 26.67 cm with stand Weight 1.6kg Interfaces 8 x USB (Universal Serial Bus) 2.0 ports (two in front, four in rear, two in secure USB (Universal Serial Bus) compartment) 1 x Dual link DVI-I 1 x DVI-D 2 x PS/2, 1 x serial, 1 x RJ-4 Expansion PCI expansion slot Warranty 1 Year Manufacturer Warranty


...

The HP H221 Host Bus Adapter (HBA) provides customers with the flexibility & speed they have come to expect from HP. It features eight external SAS ports that now support HP SAS tape drives as well as 6 Gb/s SAS & SATA hard drives with performance. The H221 HBA is designed to drive cost-effective & reliable scalability in today's data centers. 6 Gb/s SAS ASIC provides greater performance for shared storage. The HP H221 HBA now supports SAS tape drives offered by HP. Two external 4x SAS connectors offer flexibility in connecting shared devices to optimize system performance. ...

The HP H221 Host Bus Adapter (HBA) provides customers with the flexibility & speed they have come to expect from HP. It features eight external SAS ports that now support HP SAS tape drives as well as 6 Gb/s SAS & SATA hard drives with performance. The H221 HBA is designed to drive cost-effective & reliable scalability in todays data centers. 6 Gb/s SAS ASIC provides greater performance for shared storage. The HP H221 HBA now supports SAS tape drives offered by HP. Two external 4x SAS connectors offer flexibility in connecting shared devices to optimize system performance. ...

The HP SATA optical drive for HP Pro Liant servers is offered with an industry-standard SATA interface & is supported on most major operating systems. The DVD ROM drive is designed to read not only CD ROM & CD R/RW discs but also DVD ROM, DVD RAM, DVD +R/RW & DVD R/RW discs. ...