The Cooler Master GX range of power supplies feature a single powerful +12V rail that has been designed to deliver more than ample power to dual graphics card systems, no matter if you use SLI or Cross Fire X. On top of this you also get a wide range of other high-quality Cooler Master features which makes the Cooler Master GX range the ideal solution for your system. Designed for dual GPU systems All of the power supplies in the Cooler Master GX range have been specifically designed for dual GPU systems & the 750W model also carries SLI certification for high-end Nvidia GTX graphics cards, as it offers four PCI Express power connectors. Up to 85% efficiency All of the power supplies in the Cooler Master GX range features up to 85% power efficiency & are 80 plus rated. This means more power goes where it’s needed & less power is wasted in heat. Advanced features The Cooler Master GX series comes with a range of advanced features such as a powerful single +12V rail, huge bulk capacitors with a >17ms hold up time which means that the power supply will be able to handle peak loads better, low noise dual layer EMI filters that reduces noise in the power lines, an energy efficient dual mode Active PFC/PWM controller, an efficient transformer that reduces the 5 Vsb power loss when the system is in standby mode & a wide range of protection designs that will prevent damage to the system in case of a malfunction. Features * Compliance with the latest Intel standard ATX 12V V 2.31 * Single 12V rail for most demanding SLI configurations * High efficiency design that meets 80plus requirements (85% typical) * Ultra-silent operation with intelligent 120mm fan speed control * Multiple protection design * High reliability * Huge bulk capacitor for hold time up >17ms at full loading * Integrated Active PFC with PWM * Efficient transformer * Five year warranty

Specification Model RS.50-ACAAE3-UK Type Intel Form factor ATX 12V V2.31 Dimension (W / H / D) 150*140*86 mm Input Voltage 90-264 Vac Input Current 7A@115vac, 5A@230 Vac 10A@115 Vac, 6A@230 Vac Input Frequency Range 47-63 Hz PFC Active PFC Power Good Signal 100-500ms Hold Up Time >17ms Efficiency 85% Typical MTBF > 100000 Hours Protection OVP/UVP/OPP/OTP/SCP Output Capacity 550W/650W/750W Max. Output Capacity 660W/780W/900W Operation Temperature 0-40 Degrees Regulatory TUV/CE/UL/FCC/BSMI/GOST/C-tick/CCC/KCC Fan 120mm Certifications 80 Plus 750W: SLI & 80 Plus Connector 20+4 Pin MB x 1 4+4 Pin CPU 12V x 1 6+2 Pin PCI x 4 SATA x 9 4 Pin Peripherial x 3 4 Pin Floppy x 1

...

The Cooler Master GX range of power supplies feature a single powerful +12V rail that has been designed to deliver more than ample power to dual graphics card systems, no matter if you use SLI or Cross Fire X. On top of this you also get a wide range of other high-quality Cooler Master features which makes the Cooler Master GX range the ideal solution for your system. Designed for dual GPU systems All of the power supplies in the Cooler Master GX range have been specifically designed for dual GPU systems & the 750W model also carries SLI certification for high-end Nvidia GTX graphics cards, as it offers four PCI Express power connectors. Up to 85% efficiency All of the power supplies in the Cooler Master GX range features up to 85% power efficiency & are 80 plus rated. This means more power goes where it’s needed & less power is wasted in heat. Advanced features The Cooler Master GX series comes with a range of advanced features such as a powerful single +12V rail, huge bulk capacitors with a >17ms hold up time which means that the power supply will be able to handle peak loads better, low noise dual layer EMI filters that reduces noise in the power lines, an energy efficient dual mode Active PFC/PWM controller, an efficient transformer that reduces the 5 Vsb power loss when the system is in standby mode & a wide range of protection designs that will prevent damage to the system in case of a malfunction. Features * Compliance with the latest Intel standard ATX 12V V 2.31 * Single 12V rail for most demanding SLI configurations * High efficiency design that meets 80plus requirements (85% typical) * Ultra-silent operation with intelligent 120mm fan speed control * Multiple protection design * High reliability * Huge bulk capacitor for hold time up >17ms at full loading * Integrated Active PFC with PWM * Efficient transformer * Five year warranty

Specification Model RS.50-ACAAE3-UK Type Intel Form factor ATX 12V V2.31 Dimension (W / H / D) 150*140*86 mm Input Voltage 90-264 Vac Input Current 7A@115vac, 5A@230 Vac 10A@115 Vac, 6A@230 Vac Input Frequency Range 47-63 Hz PFC Active PFC Power Good Signal 100-500ms Hold Up Time >17ms Efficiency 85% Typical MTBF > 100000 Hours Protection OVP/UVP/OPP/OTP/SCP Output Capacity 550W/650W/750W Max. Output Capacity 660W/780W/900W Operation Temperature 0-40 Degrees Regulatory TUV/CE/UL/FCC/BSMI/GOST/C-tick/CCC/KCC Fan 120mm Certifications 80 Plus 750W: SLI & 80 Plus Connector 20+4 Pin MB*1 4+4 Pin CPU 12V*1 6+2 PIn PCI-e*2 SATA*6 4 Pin Peripherial*3 4 Pin floppy*1

...

Homecoming Classic Cooler Master’s classic HAF series is making a return with HAF 500. Built for high airflow & peak performance, the HAF 500 boasts iconic 200mm large intake ARGB fans, ensuring unparalleled intake & cooling efficiency. The chassis features a dedicated GPU fan, adjustable to various GPU lengths. Ample clearance for dual 360mm radiators on the top & front panel accommodates the most advanced water cooling setups. Tool-less side panels & a removable top panel facilitates simplified, hassle-free component installation without the need to struggle with small spaces. Mesh Front Panel Large filtered intakes promotes high airflow, keeping internal components running at optimal temperature. Dual 200MM ARGB Fans Iconic 200mm ARGB fans embedded in the core of the HAF Series in design & function move high volumes of air quietly & effectively due to their large size. Utilizing the included hub, ARGB lighting can be customized to create a comprehensive theme to match your build. Rotatable GPU Fan A 120mm fan positioned on top of the HDD cage, provides dedicated GPU cooling to ensure maximum performance. The fan bracket can be rotated to accommodate various GPU size & configurations. Screwless & Tool-free TG Side Panel Design The tempered glass side panel is secured with pins for easy removal, facilitating quick access to the internals without the use of tools. An optional screw can be installed to further secure the tempered glass side panel. USB (Universal Serial Bus) 3.2 Gen 2 Type C Support USB (Universal Serial Bus) 3.2 Gen 2 Type C ports built into the I/O panel allows multi-purpose, streamlined data transmission. Removable Top Panel The top panel is entirely removable for enhanced access to the components during assembly. Ease of use also facilitates the mounting of cooling solutions such as fans & radiators. Versatile Cooling Options Support for up to eight 120mm fans & dual 360mm radiators on the top & front panel ensure high compatibility for liquid-cooled systems. ...

Cooler Master adds another new member to the HAF series, the HAF 912 Plus. To carry the mission of providing the best thermal solutions, HAF 912 Plus supports two 120 mm for external radiator & high-end CPU coolers. Furthermore, the spacious interior accommodates two 200mm fans & two-- 120mm fans for better & superior airflow yet, enough to fit 12 devices & high-end GPUs such as Radeon HD5970 & Nvidia GTX 480. HAF 912 Plus features rugged looks, massive air cooling & trademark interior that signifies performance & makes it a killer machine. Features
- HAF 912 Plus is built in aggressive design & stylish interior black coating.
- The compact interior able to accommodates 12 devices.
- Supports long graphics cards including ATI Radeon HD 5970 & NVIDIA Geforce GTX 480.
- Superior cooling performance support up to two 200 mm & two 120 mm fans.
- Front 200mm fan with brilliant Red LED provides the best airflow to HDDs.
- Removable 3.5”HDD cage provides enthusiasts more convenient installation.
- Customized neat cable management. Specifications Available Color Black Material Case Body: Steel / Front bezel: Plastic & mesh Dimension (W / H / D) Main unit: 230 x 480 x 496 mm / 9.1 x 18.9 x 19.5 inch (with stand) Weight Net: 8.45kg / 18.6 lbs M/B Type Micro-ATX / ATX 5.25" Drive Bay 4 Exposed (one could be converted to 3.5” bay) 3.5" Drive Bay 1 Exposed (converted from 5.25” bay) / 6 Hidden I/O Panel USB (Universal Serial Bus) 2.0 x 2, e-SATA x 1, Audio x 1, Mic x 1 Expansion Slots 7+1 Cooling System Front: 200 mm red LED fan x 1, 700RPM, 19d BA (can be swapped for two 120mm fans) Top: 200 mm black fan x 1 (not included ; can be swapped for two 120mm fans) Rear: 120 mm black fan x 1, 1200 RPM, 17 d BA Side:120/140 mm fan x 1 (not included) Power Supply Bottom –mounted / ATX PS2 / EPS 12V (PSU not included) 2.5"/3.5"- SATA HDD Drive Bay 4 Hidden (two converted from 3.5” bay)






...

Introducing the Cooler Master HAF Mini 922 Case Following the success of the full tower Coolermaster HAF 932, Cooler Master extends the line to a mid tower with the Coolermaster HAF 922. It has a rugged strong appearance & outstanding protection designs that characterize a beast yet to be tamed. Without a doubt this mid tower has it all! It accommodates all sorts of high-end hardware from its spacious interior, & supports up to three 200 mm fans for maximum airflow at minimum noise. Superior Cooling Performance Extreme cooling performance that supports up to seven cooling fans. Spacious interior can accomodate radiator for liquid cooling systems & high-end hardware. User Friendly Extreme airflow, uncompromising cooling performance, ruggedly strong with outstanding protection Acommodates demanding high-end components including full length graphics cards CPU cooler retaining hole design for quick CPU cooler installation LED ON/OFF switch for front 200 x 30 mm fan Patented button design for easy maintenance of 5.25” drive devices PSU bottom fan can be setup facing up or down to increase airflow through out the case Cable Management System The cable management for HAF 922 is able to support the cables whilst being routed through the chassis from device A to B, the motherboard tray

Includes:: cable access openings which cables can routed in or out from the chassis, also to prevent causing damage for cables/components. Specifications Dimension (W x H x D) Main Unit: 253 x 502 x 563 mm / 10.0 x 19.7 x 22.2 inches Weight 8.7 / 10.9kg ; 19.2 / 24.0 pounds Material Steel Motherboard Type ATX / Micro-ATX 5.25” Drive Bay 5 Exposed (one could convert to 3.5” drive bay) 3.5” Drive Bay 5 Hidden, 1 Exposed (converted from one 5.25” drive bay) Cooling System Front: 200 mm fan x 1 Red LED on / off fan x 1 / 700 RPM / 19 d BA Top: 200 mm fan x 1 / 700 RPM / 19 d BA (can be swap to 120 mm fan x 2 ) Side: 200 mm fan x 1 (not included) Rear: 120 mm fan x 1 / 1200 RPM / 17 d BA Bottom: 120 / 140 mm fan x 1 (not included) I/O Panel USB (Universal Serial Bus) 2.0 x 2, MIC x 1, SPK x 1, e SATA x 1, Audio x 1 (support HD / AC97 Audio) Expansion Slot 7 + 1

...

HAF Stacker
- the first expandable system that allows externally modular upgrades. The HAF 915F/R is a Mini-ITX case with removable
...

Coolermaster HAF XM
- a "mid tower" version of the Coolermaster HAF X, which comes with full tower features for PC enthusiasts.
...

Case A "mid tower" version of the HAF X, which comes with full tower features for PC enthusiasts. It supports up to four 200mm fans to keep constant cooling while housing high-end components, such as AMD Radeon HD 7970 & NVIDIA GTX 680. It also supports up to 9 HDDs & 8+1 expansion slots for 3-Way SLI/CF. The smart design of latch on side panel & sliding PSU cable cover ensures the convenience & neatness of system building. in addition, HAF XM is equipped with two USB (Universal Serial Bus) 3.0 ports for faster data transfer. * Enthusiast case with the support for four 200mm fans * Latch on 90° rotated side panel for easy system access * Rich I/O panel with two USB (Universal Serial Bus) 3.0 super speed ports * 8+1 expansion slots for NVIDIA 3-way SLI™ & AMD Cross Fire X™ * Supports up to 9 HDDs, including two X-Dock slots & one behind the motherboard tray * Sliding PSU cable cover for enhanced cable management * Top compartment with rubber pad for placing personal belongings * Mesh on front panel, top cover; vents on side panel & bottom for excellent cooling Available Color Full Midnight Black Material Appearance: Mesh, Synthetics; Case body: Steel Dimension (W / H / D) 252 x 530.5 x 579 mm / 9.9 x 20.9 x 22.8 inch Weight 10.5kg / 23.1 lb M/B Type Micro-ATX, ATX, E-ATX 5.25" Drive Bays 3 3.5" Drive Bays 8 (hidden:6, X-Dock:2) 2.5" Drive Bays 9 (6 are converted from 3.5" bays, X-Dock x 2, 1 is behind the M/B tray) I/O Panel USB (Universal Serial Bus) 3.0 x 2 (int.), USB (Universal Serial Bus) 2.0 x 2, Audio In & Out x 1 (supports HD Audio), LED switch for the front fan Expansion Slots 8+1 Cooling System Front: 200mm Red LED fan x 1 (converted to 120mm fan x 2 / 140mm fan x 1) Top: 200mm fan x 2 (1 is optional; converted to 120/140mm fan x 2) Rear: 140mm fan x 1 (converted to 120mm fan x 1) Side: 200mm fan x 1 (optional; converted to 140mm fan x 2) HDD: 12025mm fan x 2 (optional) Power Supply Type Standard ATX PS2 / EPS (optional) Maximum Compatibility VGA card length: 354.0 mm / 13.9 inch (with HDD cage) 463.0 mm / 18.2 inch (without HDD cage) CPU cooler

Height: 196.0 mm / 7.7 inch PSU GX-Lite power supply is the light version from the original GX series, it specifically targeted at systems in the mid to high range, yet reasonably priced, providing users with unsurpassed cost per performance. Features single highly 12 V rail, proficiently delivering power all the way up to 86%-88%, also supports most demanding components including the processor, drives & cooling fans. The GX-Lite Series will keep the power in your hands. High Efficiency Delivers at least 86%-88% efficiency on regular loading. Intel Compliant ATX12V v 2.3 & EPS version 2.91 compliant. Single 12 V Power Rail Tackling challenges from the most power-intensive peripherals head on, this solitary 12 V power rail provides ample power & strong resistance to any overloading. Double-Layer EMI Filter Dual protection from electromagnetic interference, thus restraining noise & interference for greater protection for you & your connections. Intelligent Fan Speed Control 120 mm silent fan with built-in fan control provides first class airflow & low noise level. Active PFC+ PWM Combo Controller Integrating this active controller will increase the efficiency of any computer, making PFC higher than 99%. Massive Bulk Capacitor Producing hold times >17ms upon full loading. & More -Over Voltage Protection (OVP), Over Power Protection (OPP), Short Circuit Protection (SCP) offers maximum safety to your system -MTBF 100, 000 hours for high reliability. -Three years warranty worldwide. Model RS-700-ASAB Type Intel ATX 12V V2.3 Dimension (W / H / D) 150 x 140 x 86 mm 5.9 x 5.5 x 3.4 inch Input Voltage 180-264V (Auto Range) Input Current 6A Input Frequency Range 47 Hz-53 Hz PFC Active PFC (>0.9) Power Good Signal 100-500ms Hold Up Time 17ms Efficiency 88% Typically MTBF 100, 000 Hours Protection OVP / OPP / SCP Output Capacity 700W Operation Temperature 0~40°C (Nominal Input Voltage) Regulatory TUV / GOST / CE / C-Tick / CCC / KC Fan 120mm Connector M / B 24 pins x 1 CPU 4 + 4 pins x 2 PCI-e 6+2 pins x 4 SATA x 6 Peripheral 4 pins x 3 Floppy 4 pins x 1

...

The unbreakable rule has now been broken. Cooler Master’s Turbine Master is the company’s latest 120mm high air flow fan that refutes the standard of “high air flow fan = loud”. Modeled after a strong turbine engine, the Turbine Master produces a strong air flow from an ingenious 16-blade design & generates unsurpassed airflow combined with a circular semi-frameless design to maximize coverage & reduce noise. The Barometric Ball Bearing (BBB) can be easily removed to provide effortless cleaning & quick maintenance. Low R.P.M., High Air Flow Encompassing power & speed to smoothness & efficiency, the Turbine Master is available in three speeds to suit every need. A choice among 800 R.P.M, 1200 R.P.M, & 1800 R.P.M fans are available, each embodying an extreme high air flow. With air flow as high as 80.3 CFM & sound levels as quiet as 13.83 decibels, this fan will satisfy the needs of silent & even performance systems. Barometric Ball Bearing (BBB) Technology Barometric Ball Bearing is a uniquely advanced technology to maintain barometric pressure in the center of the fan. Progressive barometric ball bearing technology extends the life expectancy of the Turbine Master up to 100, 000 hours of use, while keeping the noise level to a soft, unobtrusive undertone. Features The innovative Barometric Ball Bearing technology provides longer life span while remaining lower noise level Removable blades for quick & easy cleaning Outstanding 16-blade design covers maximum area to generate striking airflow, even under low speed operation High airflow design gives excellent chassis ventilation One-of-a-kind turbine shape inspired by a powerful turbine engine Specifications Dimension 120 x 120 x 25 mm / 120 x 120 x 39 mm (with hub cover) Speed (R.P.M.) 800 R.P.M. +/- 10% Air Flow (CFM) 35.07 CFM +/- 10% Air pressure (mm H2O) 0.42 mm H2O Noise 13.83 d BA Bearing Type Barometric Ball Bearing Fan Life Expectancy 100, 000 hours Voltage 12 V DC Current (Ampere) 0.08A (0.2A MAX) Power consumption 0.96W (2.4W MAX) Weight 123.7 g Connector 3-pin Accessory 4x Rubber screw 4x Metal screw 4x Rubber pad 1 x Molex-to 3 Pin adapter ...

The Hyper 212 EVO now features four Cooler Master patented Continuous Direct Contact (CDC) heat pipes that are tightly packed into a flat array on the CPU Cooler base. This acts as a virtual vapor chamber that dissipates a large amount of heat. The aluminum fin structure has been optimized to provide the perfect performance balance between high & low speed fan operations. Features Well-balanced cooling performance provides fin optimizations with perfect balance between high & low speed operations. 4 Direct Contact heat pipes with the patented CDC (Continuous Direct Contact) technology
- creating a perfect, sleek surface for heat conduction. Wide-range PWM fan with unique wave-shaped blade design for excellent airflow. Versatile all-in-one mounting solution supporting the latest Intel? LGA 1366 / 1155 & AMD FM1 / AM3+. Specifications CPU Socket
- Intel Socket LGA1366/1156/1155/775
- AMD Socket FM1/AM3+/AM3/AM2+/AM2 Dimension (W / H / D)
- 120 x 80 x 159 mm (4.7 x 3.1 x 6.3 inch) Heat Sink

Dimensions
- 116 x 51 x 159 mm (4.6 x 2.0 x 6.3 inch) Heat Sink Material
- 4 Direct Contact Heat Pipes / Aluminum Fins Heat Sink Weight
- 465g (1.03 lb) Fan Dimension (W / H / D)
- 120x 120x 25 mm (4.7x 4.7x 1 inch) Fan Speed
- 600
- 1600 RPM (PWM) ± 10% Fan Airflow
- 24.9
- 66.3 CFM ± 10% Fan Air Pressure
- 0.3
- 1.7mm H2O ± 10% Fan Life Expectancy
- 40, 000 hours Fan Noise Level
- (d B-A) 9
- 31d BA Bearing Type
- Long Life Sleeve Bearing Connector
- 4-Pin Fan Weight
- 104g (0.23 lb) Weight
- 580g (1.28 lb)






















...