The Thermalright Silver Arrow SB-E is a massive CPU cooler that covers most new platforms. Its massive size starts with 8 x 6mm sintered heat-pipes that are nickel plated for slower oxidation ensuring a long lasting cooler. Next the fin area is an astounding 154mm x 120mm in surface heat dissipation area with 120mm & 140mm fan compatibility. Finally this cooler comes stock with dual low noise PWM fans to keep your temperatures to the lowest possible. (1 x TYR-150 & 1 x TYR-141) A third fan can be mounted to this cooler due to its unique twin high rise design. 8 X 6mm sintered heat-pipes effectively takes away excessive heat from the CPU when overclocked, Nickel Plated heat-pipes, slower Oxidation & deterioration of the heat-pipes, provides longer period of Thermal conductivity. Double fin design, each side with 154mm*120mm heat dissipation area, can be used with 14 or 15 cm fan (fan clips included). Special Arrow fin design, which allows cool air to pass through & take heat away rapidly, effectively provide cooling for the cpu. Support Multiple-Platforms. Can be used on Socket 2011/1366/1155/1156/775 Platform, & AM2/AM2+/AM3/AM3+/FM1 Sockets. Including TY-150&TY-141 Ultra low noise PWM fans & PWM Y-Cable. With the compatibility of up to 3 fans maximum. ...

Features
- 8 X 6mm sintered heat-pipes effectively takes away excessive heat from the CPU when overclocked, Nickel Plated heat-pipes,
...

8 X 6mm sintered heat-pipes effectively takes away excessive heat from the CPU when overclocked, Nickel Plated heat-pipes, slower Oxidation & deterioration of the heat-pipes, provides longer period of Thermal conductivity. Double fin design, each side with 154mm*120mm heat dissipation area, can be used with 14 or 15 cm fan (fan clips included). Special Arrow fin design, which allows cool air to pass through & take heat away rapidly, effectively provide cooling for the cpu. Including Two TY-143 high speed PWM fans & specialized PWM Y-Cable. With the compatibility of up to 3 fans maximum. Manufacturer
- Thermalright Model Number
- Silver Arrow SB-E SE

Specification Intel Compatibility
- Socket 2011
- Socket 1366
- Socket 1156
- Socket 1155
- Socket 775 AMD Compatibility Socket FM2
- Socket FM1
- Socket AM3+
- Socket AM3
- Socket AM2+
- Socket AM2 Air Flow
- 31.4 to 130 CFM Sound Level
- 21 to 45 d BA Fan Speed
- 600 to 2500 RPM Fan Connection
- 4 Pin PWM Fan

Dimensions
- 152 x 140 x 26.5 mm Approx Cable Length
- 300 mm Overall

Dimensions
- 154 x 103 x 165 mm (without fans)
- 154 x 130 x 165 mm (both fans installed) Materials
- Nickel Plated Copper Heat Pipes
- 8 Special Features
- High Performance Cooler




























...

The Thermalright True Spirit Rev. A (BW) is one of the most powerful models in its class & has so many high-priced competitors in terms of cooling performance in their place. Product Features - The cooler is suitable for all current processors & inherently compatible with Intel Socket LGA 2011th The tower cooler has four 6 mm thick, high-quality heat pipes positioned optimally so that the recorded CPU waste heat can be delivered perfectly to the 48 aluminum fins. Supplied with a high quality 120 mm fan is included, using the PWM signal from the motherboard (if supported) automatically infinitely in its speed of 600
- is regulated
- 1, 500 r / min (15% + /). Product

Specification
- Brand
- Thermal Right Item Weight
- 1kg Product

Dimensions
- 19 x 14.4 x 11 cm Item model number
- True Spirit 120 Rev. A BW










...

Technical Spec: Heatsink Specifications: Dimension: Length 155mm x Width 53mm x Height 170mm Weight: 771g (including fan & pads. excluding mounting brackets) Heatpipe: 6mm heatpipe*6 units Copper Base: C1100 Pure copper nickel plated with mirror shine Fan Specification: Dimension: L160mm x H140mm x W26.5mm Weight: 140g Fan speed: 900~1300RPM (PWM controlled) Fan noise: 19~21d BA Airflow: 56~73CFM Connector: 4 Pin (PWM Fan connector) ...

Level 20 Battlestation RGB Gaming Desk is Thermaltake’s electric height-adjustable gaming desk with full mousepad surface & software controllable 16.8 milling colours lighting strips. Games can switch lighting effects via i Take gaming engine & synchronize with TT RGB PUS products. Level 20 Battle Station RGB Gaming Desk also offers exceptional functionality, games can adjust the heights of the gaming desk electronically to sitting or standing positions. In addition, the large full mousepad surface allows games to set up multi monitor gaming systems. Level up your professional gaming experiences with the Level 20 Battle Station RGB Gaming Desk! Features i Take gaming engine enables vivid dynamic lighting control & full-system lighting synchronization across compatible peripherals, power supply, cooling, fans & more. Features 8 dynamic lighting effects with up to 20 customizable zones Allows for multi-monitor gaming setup Height adjustable from 27.5” to 43.3” (without desktop thickness) Quiet motor for added strength & stability 4 level profile programmable controller makes each trasition quick & easy Cable management system that keeps your workspace clutter-free. Heavy duty frame boasts a weight capacity of 330 pounds Full surface mouse pad included Desk Dimension: 64.9” Wide x 29.5” deep Board Material: MDF P2 ( Medium density Fibreboard) Box Contents Level 20 RGB Battle Station Gaming Desk User manual Warranty Card ...

The Tt e SPORTS BLACK gaming mouse is a straight no-frills gaming mouse. No gimmicks involved, it's simple & straightforward gaming mouse with left/right clicks & mouse 4 + 5 buttons. The shape's just right & the outside coating provides a non-slip grip. Ergonomic shape Your hands stay sturdy & comfortable while gaming thanks to the BLACK mouse's ergonomic right-handed shape. DPI on
- the-fly Adjust your DPI on-the-fly with two easy-accessible buttons & an integrated DPI level indicator on the mouse. A powerful laser engine built for gaming. The Tt e SPORTS BLACK mouse comes equipped with a powerful 4, 000 DPI sensor for maximum accuracy & precision. Need more weight? Adjust the weight of the mouse via the BLACK's integrated weight-in system located on the bottom of the mouse. Spec Color black DPI 4000 Sensor Type Laser No. of Buttons 6 Game Genre FPS/MMORPG Memory Size 64kb No. of Macro Keys 18 No. of Game Profiles 3 Lighting Effect Yes Pause-Break Effect Yes Color Options 1 USB (Universal Serial Bus) cable length 1.8m braided Weight-In Design Yes Graphical UI Yes Industrial Rubber-Coating Yes Gold-Platted USB (Universal Serial Bus) Yes Dimension 120 x 70 x 40mm
...

Thermaltake 120mm ARGB AIO CPU Liquid Cooler Thermaltake Water 3.0 360 ARGB Sync Edition comes with three 120 mm fan with a large surface radiator, high performance waterblock & pump for ultimate CPU cooling. The built-in Pure ARGB fan features compression blades, hydraulic bearing, & 16.8 million colors LEDs that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI & As Rock. Users can easily switch RGB lighting effects using the ARGB controller that is included in the packet, or by ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync & As Rock Polychrome software. Water 3.0 ARGB Sync Edition Series allows users to enjoy better cooling performance & greater CPU protection! Tt LCS Certified Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design & hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features & fitment. Pure 12 ARGB Sync Radiator Fan Water 3.0 ARGB Sync Edition is equipped with Thermaltake Pure 12 ARGB Sync Radiator Fan. It features compression blades, hydraulic bearing, & a 16.8 million colors LED ring with 9 addressable LEDs that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI & As Rock. Sync with Motherboard RGB Software Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync & As Rock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI & As Rock official websites. Asus Asus Adressable Header Gigabyte Digital Pin Header MSI JRAINBOW Header ASRock Addressable RGB LED Header Switch LED Modes with ARGB Controller The ARGB controller allows users to switch LED modes, LED colors, & LED Speeds when using a motherboard without a 5V addressable RGB header. Users can switch between flow, ripple, pulse, blink, wave, full light, RGB spectrum, & off modes with various colors & LED speeds options.* The maximum signal output for one controller is 90 addressable LEDs. High Efficiency Radiator Specially designed for Water 3.0 ARGB Series, the large surface radiator increases the cooling surface & exceptional heat dissipation. High Performance Waterblock The high performance copper base plate accelerates the heat conductivity. The pre-refilled coolant reduces any stress from liquid replenishment hassle. in addition, the reinforced sleeved cable delivers the best durability & prevents the tubing from any damages. High Quality Pump The high quality & reliable pump enables the maximum amount of water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required. Easy Installation Featuring the latest cooling performance, the self-contained design of the Thermaltake Water 3.0 ARGB Sync Edition Series provides an easy installation system & a totally maintenance-free operation, requiring only the minimum amount of space in the chassis. ...

Unparalleled Cooling Performance The TOUGHFAN is a PWM controlled fan which is designed to perform at a maximum operating speed of up to 2000 RPM allowing unparalleled cooling performance. Exceptional Blade Design Featuring high tensile strength & low thermal expansion coefficient materials, the fan blade is built with special liquid crystal polymer (LCP), a compound which minimises vibration when the fan is operating at full speed. Metal-Reinforced Motor Hub The TOUGHFAN’s centre is constructed with a full steel motor hub providing enhanced stability & durability. The 2nd Generation Hydraulic Bearing The 2nd generation hydraulic bearing incorporates a new shaft design with inside etches allowing preservation of lubricant on both sides whilst reducing noise during operation. Lowering audible levels & extending lifespan. Built for Superior Cooling The TOUGHFAN is designed for all cooling applications. It’s your perfect go to solution whether your using it as radiator fan or on a air cooler. Level up with the TOUGHFAN for superior cooling performance. Anti-Vibration Mounting System The in-mold injection anti-vibration rubber pads dampen the vibration of the fan allowing the fan to spin at higher levels without compromising noise levels. The fan is designed with 80% coverage for all corners, maintaining low noise levels when in operation. Features 120mm. Hydraulic Bearing Gen. 2. 500 ~ 2000 R.P.M. ...

Superb Cooling Performance at 2500 RPM Play at the speed of professional esports with an ultrafast 144 Hz IPS gaming panel. The blazing fast 144 Hz refresh rate enables a true high-FPS experience that makes the flow of fast-paced gameplay look impeccably smooth. Get an edge in combat where rapid response & environmental awareness are crucial to victory. Exceptional Grey Fan Blades. Featuring high tensile strength & low thermal expansion coefficient material, the THOUGHFAN Turbo is designed with grey colored liquid crystal polymer (LCP) made fan blades, minimizing vibration when the fan operates at full speed. Exceptional Grey Fan Blades. Inspired by our collaboration with BMW Designworks Group, the Strix G slickly fuses effortless style with cutting-edge cooling you can see. The slick design comes in three distinct styles. Original Black wraps the Strix G in stealthy black, giving it a professional persona that blends in easily in any environment. 2nd Generation Hydraulic Bearing The 2nd generation hydraulic bearing incorporates a new shaft design with inside etches allowing preservation of lubricant on both sides whilst reducing noise during operation. Lowering audible levels & extending lifespan. High Air Pressure & High Airflow TOUGHFAN Series is designed to produce high static pressure & airflow, providing users impeccable cooling results. TOUGHFAN 12 Turbo – 72.69 CFM/ 500~2500 R.P.M/ 3.78 mm-H2O TOUGHFAN 14 – 119.1 cfm/ 500-2000 R.P.M/ 3.54 mm-H2O TOUGHFAN 12 – 58.35 cfm / 500-2000 R.P.M/ 2.41 mm-H2O Anti-Vibration Mounting System The in-mold injection anti-vibration rubber pads dampen the vibration of the fan allowing the fan to spin at higher levels without compromising noise levels. The fan is designed with 80% coverage for all corners, maintaining low noise levels when in operation. ...