In case it's getting tough! The Sharkoon BD28 is a PC case in ATX format, geared for the needs of gamers & enthusiasts. The case is available in red, blue & green, with the internal lacquer, fan color as well as the front LED also in the matching color. Next is a gunmetal edition with 2x blue LED fans & a black interior finish. The acrylic side panel provides, in all color variations, insight into the inner life of the built-in components. Generous Space With a width of 235 mm & generously broad side panels, easy installation of large tower coolers with a height of up to 179 mm is guaranteed. Likewise, the BD28 offers more options for the installation & unobtrusive wiring of all components. Extra-long graphics cards up to 41.5 cm can be installed due to the modular hard drive management. If equipped with the maximum 2.5 ¢‚¬ hard drives/SSDs, the BD28 still offers enough space for VGA boards up to 32.5 cm. Fan Configuration With the pre-installed Low Noise 120 mm LED fans in the front as well on the back, it's already arranged for optimal cooling. To further enhance the air flow inside the case, up to three additional fans can be installed. On the top of the case there is space for either two 120 mm, two 140 mm or a 180 mm fan. In the front, there are already prepared holes to mount an additional 120 mm fan. To correspond with the internal color design elements the lights are matched to compliment the color version. With the red version a red LED fan illuminates in the case's front & backside, this is also true with the blue & green versions with their respective colors. Front Connection Two USB (Universal Serial Bus) 3.0, two audio as well as two USB (Universal Serial Bus) 2.0 ports in the front offer quick access for connecting peripherals devices. In the event that the mainboard does not have an internal USB (Universal Serial Bus) 3.0 connector, the two USB (Universal Serial Bus) 3.0 ports can also optionally connect & operate in USB (Universal Serial Bus) 2.0 mode. Installation Options for Drives The case offers two 5.25 ¢‚¬& Aring;“ drive bays for screwless installation of optical drives. For the installation of card readers or other devices in 3.5" format a 5.25" adapter is included. Up to three 3.5" HDDs & four 2.5" HDD/SDD can be mounted without screws due to the included rack mounting system. An additional 2.5" HDD/SSD can be mounted on the bottom of the case, if needed.

Features: ATX case 2x 5.25" drive bays (external), 1 mounting adapter for 2.5" & 3.5" HDD/SSD included 4x 2.5" HDD/SSD bays (rail type) with removable design 3x 3.5" HDD bays (rail type) 1x 2.5" HDD/SSD bay (screw type) Front I/O: 2x USB3.0 (internal 19-pin mainboard connector), 2x USB2.0, 2x audio Quick fasteners 2 openings for water cooling Acrylic side panel Cable management system Supports VGA cards up to 32.5 cm in length (up to 41.5 cm, if middle HDD cage is removed) Dimensions: 480 x 235 x 460 mm (L x W x H) Weight: ~6.5kg

...

In case it's getting tough! The Sharkoon BD28 is a PC case in ATX format, geared for the needs of gamers & enthusiasts. The case is available in red, blue & green, with the internal lacquer, fan color as well as the front LED also in the matching color. Next is a gunmetal edition with 2x blue LED fans & a black interior finish. The acrylic side panel provides, in all color variations, insight into the inner life of the built-in components. Generous Space With a width of 235 mm & generously broad side panels, easy installation of large tower coolers with a height of up to 179 mm is guaranteed. Likewise, the BD28 offers more options for the installation & unobtrusive wiring of all components. Extra-long graphics cards up to 41.5 cm can be installed due to the modular hard drive management. If equipped with the maximum 2.5 hard drives/SSDs, the BD28 still offers enough space for VGA boards up to 32.5 cm. Fan Configuration With the pre-installed Low Noise 120 mm LED fans in the front as well on the back, it's already arranged for optimal cooling. To further enhance the air flow inside the case, up to three additional fans can be installed. On the top of the case there is space for either two 120 mm, two 140 mm or a 180 mm fan. In the front, there are already prepared holes to mount an additional 120 mm fan. To correspond with the internal color design elements the lights are matched to compliment the color version. With the red version a red LED fan illuminates in the case's front & backside, this is also true with the blue & green versions with their respective colors. Front Connection Two USB (Universal Serial Bus) 3.0, two audio as well as two USB (Universal Serial Bus) 2.0 ports in the front offer quick access for connecting peripherals devices. In the event that the mainboard does not have an internal USB (Universal Serial Bus) 3.0 connector, the two USB (Universal Serial Bus) 3.0 ports can also optionally connect & operate in USB (Universal Serial Bus) 2.0 mode. Installation Options for Drives The case offers two 5.25 drive bays for screwless installation of optical drives. For the installation of card readers or other devices in 3.5" format a 5.25" adapter is included. Up to three 3.5" HDDs & four 2.5" HDD/SDD can be mounted without screws due to the included rack mounting system. An additional 2.5" HDD/SSD can be mounted on the bottom of the case, if needed.

Features: ATX case 2x 5.25" drive bays (external), 1 mounting adapter for 2.5" & 3.5" HDD/SSD included 4x 2.5" HDD/SSD bays (rail type) with removable design 3x 3.5" HDD bays (rail type) 1x 2.5" HDD/SSD bay (screw type) Front I/O: 2x USB3.0 (internal 19-pin mainboard connector), 2x USB2.0, 2x audio Quick fasteners 2 openings for water cooling Acrylic side panel Cable management system Supports VGA cards up to 32.5 cm in length (up to 41.5 cm, if middle HDD cage is removed) Dimensions: 480 x 235 x 460 mm (L x W x H) Weight: ~6.5kg

...

Sharkoon BW9000-W ATX Midi Tower Case (Black) PC Case for High Standards Stylish appearance: The solid Sharkoon BW9000-W ATX Midi Tower scores with its elegant design & impressive functionality. Tool-free installation of nearly all components saves your valuable time & allows effortless assembly of individual PC systems. In addition, the BW9000-W is well prepared for the installation of professional water cooling systems & offers plenty of space for radiators, bulky CPU cooler & extra-long graphics cards. Three easily accessible dust filters simplify the cleaning process. Two pre-installed 140 mm fans hide behind the minimalist front with mesh elements. A 120 mm LED fan is pre-installed on the rear panel. The indirect spot lighting of the front panel as well as the acrylic side panel of the Window version underlines the tasteful look of the case. The BW9000-W is available in both black & white. Excellent Installation Options Thanks to the broad

Dimensions & special design of the case interior, the BW9000-W provides lots of room for the installation of various components. Tower coolers with a maximum height of up to 16.5 cm can be installed. Due to the modular hard drive management, graphics cards up to a maximum of 43 cm can be used. The tower offers the possibility to install a total of two radiators for water cooling. The top panel has extra space to attach either a 280 or 360 mm radiator with a total height, including fan, up to 5.5 cm. In the front, a 280 mm radiator with a maximum height of 6.5 cm can be installed. Maximum length for power supplies is 26 cm. Dust filters in the front as well as case bottom are easily removable to facilitate the cleaning of the filter. A dust filter is also installed in the top panel, which can be easily removed thanks to the magnetic fastener. In addition, a useful installation opening for CPU cooler, two water cooling openings & a convenient cable management system with rubberized cable protection is provided. Airflow Optimized Case Design Two 140 mm fans are pre-installed in the front, a 120 mm fan can be found on the rear panel. Thus, the case is already well prepared for powerful yet equally silent cooling of the installed components. To further strengthen internal airflow, the top panel offers space for either up to three 120 mm fans or two 140 mm fans. Great Connectivity Two USB (Universal Serial Bus) 3.0, two USB (Universal Serial Bus) 2.0 & two Audio ports on the case top panel offers easy access for connecting peripheral devices. Tool-Free Installation of Drives Using the included 5.25" to 3.5" bay cover a card reader can, for example, be quickly & easily installed into one of the two 5.25" drive bays. Internally, up to five 3.5" hard drives can be mounted with decoupled tool-free installation. Also, up to two 2.5" HDD/SSDs can be installed screwless. Specifications General: Form Factor: ATX Expansion Slots: 7 Water Cooling Openings: 2 Interior Painting: œ“ Tool-free Devices Installation: œ“ Cable Management System: œ“ Side Panel: Acrylic Color Version: Black Weight: 8.0kg

Dimensions (L x W x H): 48.0 x 21.0 x 49.0 cm I/O: USB (Universal Serial Bus) 3.0 (Top): 2* USB (Universal Serial Bus) 2.0 (Top): 2 Audio (Top): œ“ Drive Bays: 5.25": 1 5.25" or 3.5": 1 5.25" to 3.5" Bay Cover: 1 3.5" or 2.5": 5 2.5": 2 Fan Configuration: Front Panel: 2x 140 mm Fan (Pre-Installed) or Radiator (Optional) Rear Panel: 1x 120 mm LED Fan (Pre-Installed) Top Panel: 3x 120 mm or 2x 140mm Fan (Optional) or Radiator (Optional) Compatibility: Mainboard: Mini-ITX, Micro-ATX, ATX Max. Length Graphics Cards: 29.3/43.0 cm** Max. Height CPU Cooler: 16.5 cm Max. Length Power Supply: 26.0 cm Max. Height Radiator incl. Fan (Top): 5.5 cm Max. Height Radiator incl. Fan (Front): 6.5 cm** Note: * internal 19-pin mainboard connector incl. USB (Universal Serial Bus) 2.0 plug ** with middle HDD cage removed



...

Sharkoon BW9000-W ATX Midi Tower Case (White) PC Case for High Standards Stylish appearance: The solid Sharkoon BW9000-W ATX Midi Tower scores with its elegant design & impressive functionality. Tool-free installation of nearly all components saves your valuable time & allows effortless assembly of individual PC systems. In addition, the BW9000-W is well prepared for the installation of professional water cooling systems & offers plenty of space for radiators, bulky CPU cooler & extra-long graphics cards. Three easily accessible dust filters simplify the cleaning process. Two pre-installed 140 mm fans hide behind the minimalist front with mesh elements. A 120 mm LED fan is pre-installed on the rear panel. The indirect spot lighting of the front panel as well as the acrylic side panel of the Window version underlines the tasteful look of the case. The BW9000-W is available in both black & white. Excellent Installation Options Thanks to the broad

Dimensions & special design of the case interior, the BW9000-W provides lots of room for the installation of various components. Tower coolers with a maximum height of up to 16.5 cm can be installed. Due to the modular hard drive management, graphics cards up to a maximum of 43 cm can be used. The tower offers the possibility to install a total of two radiators for water cooling. The top panel has extra space to attach either a 280 or 360 mm radiator with a total height, including fan, up to 5.5 cm. In the front, a 280 mm radiator with a maximum height of 6.5 cm can be installed. Maximum length for power supplies is 26 cm. Dust filters in the front as well as case bottom are easily removable to facilitate the cleaning of the filter. A dust filter is also installed in the top panel, which can be easily removed thanks to the magnetic fastener. In addition, a useful installation opening for CPU cooler, two water cooling openings & a convenient cable management system with rubberized cable protection is provided. Airflow Optimized Case Design Two 140 mm fans are pre-installed in the front, a 120 mm fan can be found on the rear panel. Thus, the case is already well prepared for powerful yet equally silent cooling of the installed components. To further strengthen internal airflow, the top panel offers space for either up to three 120 mm fans or two 140 mm fans. Great Connectivity Two USB (Universal Serial Bus) 3.0, two USB (Universal Serial Bus) 2.0 & two Audio ports on the case top panel offers easy access for connecting peripheral devices. Tool-Free Installation of Drives Using the included 5.25" to 3.5" bay cover a card reader can, for example, be quickly & easily installed into one of the two 5.25" drive bays. Internally, up to five 3.5" hard drives can be mounted with decoupled tool-free installation. Also, up to two 2.5" HDD/SSDs can be installed screwless. Specifications General: Form Factor: ATX Expansion Slots: 7 Water Cooling Openings: 2 Interior Painting: œ“ Tool-free Devices Installation: œ“ Cable Management System: œ“ Side Panel: Acrylic Color Versions: Black, White Weight: 8.0kg

Dimensions (L x W x H): 48.0 x 21.0 x 49.0 cm I/O: USB (Universal Serial Bus) 3.0 (Top): 2* USB (Universal Serial Bus) 2.0 (Top): 2 Audio (Top): œ“ Drive Bays: 5.25": 1 5.25" or 3.5": 1 5.25" to 3.5" Bay Cover: 1 3.5" or 2.5": 5 2.5": 2 Fan Configuration: Front Panel: 2x 140 mm Fan (Pre-Installed) or Radiator (Optional) Rear Panel: 1x 120 mm LED Fan (Pre-Installed) Top Panel: 3x 120 mm or 2x 140mm Fan (Optional) or Radiator (Optional) Compatibility: Mainboard: Mini-ITX, Micro-ATX, ATX Max. Length Graphics Cards: 29.3/43.0 cm** Max. Height CPU Cooler: 16.5 cm Max. Length Power Supply: 26.0 cm Max. Height Radiator incl. Fan (Top): 5.5 cm Max. Height Radiator incl. Fan (Front): 6.5 cm** Note: * internal 19-pin mainboard connector incl. USB (Universal Serial Bus) 2.0 plug ** with middle HDD cage removed



...

Under the matte black surface of the Dark Glider operations an enhanced version of the Avago 9500 laser sensor, which supports up to 6, 000 DPI & a maximum of 11, 750 FPS. The current DPI number in use is indicated by a LC display. All ten buttons on the gaming mouse are fully programmable. With the 256 KB of onboard memory, several different user profiles can be created & easily used on another computer. The Dark Glider floats on special, lenticular ceramic glide feet & offers a Weight Tuning System in order to adjust the overall weight.

Features: Avago 9500 V2 Pro Laser sensor 10 programmable buttons Omron switches for left & right mouse button Programmable 4-way scroll wheel 5 lenticular ceramic slide pads LCD display for DPI indication 256 KB internal memory for user profiles Gold-plated USB (Universal Serial Bus) connector Cable with textile sheathing Weight Tuning System Ergonomic design Rubberized surface for maximum grip Configuration software included Supported operating systems: Windows XP/ Vista/7 (32 & 64 bit) Specifications: Max. DPI 6, 000 Max. acceleration 30 G Mouse weight max. 150 g (w/o cable)

Dimensions (L x W x H) 130 x 82, 4 x 42 mm Sensor Laser (16 bit data channel) Connector USB2.0 (gold-plated) Cable length 180 cm (textile sheathing) Max. FPS 11, 750 Button reaction time 1 ms Onboard memory 256 KB Number of buttons 10 DPI indication LC display Scroll wheel left/right yes Illumination yes, configurable via software Mouse slide pads 5, ceramic, lenticular Chip Avago ADNS-9500 v.2 (72 M Hz) Lifting sensitivity 1-5 mm Weight Tuning System 4x 3, 1 g / 4x 3, 7 g



...

The Drakonia is a laser mouse with eleven buttons & a 4-way scroll wheel. All keys are freely programmable through the included configuration software. Under the glossy surface of the dragon scale print, operates an Avago 9500 laser sensor which supports up to 5, 000 DPI. An LED indicator constantly shows the current DPI setting in use. Within the base compartment of the laser mouse you will find a Weight Tuning System allowing adjustment to the overall weight. The Drakonia is an ergonomic mouse that focuses on stability & control. Its flared base gives you: (A) more control for very small & fine movements; & (B) better comfort for extended gameplay sessions. As a result, the kind of gamers that would appreciate the Drakonia typically include FPS snipers & RTS/RPG players; those who would normally be in it for the long haul. For the latter, having as many buttons as possible is always better. Therefore, the Drakonia provides 11 programmable buttons plus a scroll wheel for those gamers who know that you dont have to always do it faster in order to do it better.

Features: Avago 9500 Laser sensor 11 programmable buttons+4-way scroll wheel LEDs for DPI indication Internal memory for user profiles Gold-plated USB (Universal Serial Bus) connector Cable with textile sheathing Weight Tuning System Ergonomic design Rubberized surface for maximum grip Configuration software included Supported operating systems: Windows XP/ Vista/7 (32 & 64 bit)

...

The Fire Glider laser mouse from our Rush line-up has both the technical specifications & high quality looks to impress even the most demanding gamers. The ergonomically formed body of the Fire Glider laser mouse fits pleasantly in the hand while the thumb pad provides a solid grip in even the most hectic gaming situations. With the Weight-Tuning-System in the bottom of the mouse, up to 19.5 grams can be added in 7 different configurations to maximize personal comfort & performance. Six of the seven buttons can be programmed with various functions through the included software. The various programming options enable easier day-to-day operations as well improving performance in gaming applications. In addition, through the software users can save individual macros to the onboard memory. Via the DPI selector, the resolution can be adjusted in six levels from 600 to a maximum of 3600 DPI. The selected DPI level is represented by various color combinations on the mouse. The Fire Glider Mouse weighs up to 135 g, has a 1.8 m long cable & connects to computers via USB (Universal Serial Bus). Procure the best advantage possible with the SHARKOON Fire Glider!

Features: Laser mouse with 7 buttons (6 of them freely programmable) DPI switch with color display (6 steps) Weight tuning system (max. 19.5 g) On-board memory for macros Smooth running & finely adjustable scroll wheel Egonomic design for convenient handling Special grip areas offering maximum hold Ideal for professional applications & gaming Supported operating systems: Windows 2000, XP & VISTA (32-/64-bit) Specifications: Max. DPI/CPI: 3600 DPI/CPI stepping: 600
- 800
- 1200
- 1600
- 2000
- 3600 Max. acceleration: 20 G Mouse weight max.: 135 g Mouse weight min.: 118 g Laser sensor: Agilent ADNS-6010 Connector: USB (Universal Serial Bus) (cable length: 1.8 m) Power input: 5V
- 60 m A







...

Fire Glider Optical Some things just simply cannot be enhanced upon. Some things have simply proven their mettle time & time again over the course of the last decade. This is why weve now outfitted our Fire Glider with an optical sensor
- proven technology to assist in your triumphs: The Fire Glider Optical provides an optical sensor supporting up to 3, 000 DPI & 3, 600 FPS. The ergonomically shaped body of this gaming mouse, with its reduced flame design, fits comfortably in the hand with the thumb pad providing a solid grip in even the most hectic gaming situations. With the Weight-Tuning-System situated in the bottom of the mouse, up to 19.5 grams can be added to maximize personal comfort & performance in 7 different configurations. Five of the seven buttons are fully programmable for various functions through the included software. These programming options enable easier day-to-day operations as well as improving performance in gaming applications. In addition, through the software, users can save individual macros to the onboard memory. Via the DPI selector, the resolution can be adjusted in five levels from 400 to a maximum of 3, 000 DPI. The selected DPI level is represented by various color combinations on the mouse. The Fire Glider Optical weighs up to 135 g, has a 1.8 m long cable & connects to computers via USB (Universal Serial Bus). Procure the best advantage possible with the SHARKOON Fire Glider Optical!

Features: Optical sensor 7 buttons, 5 of them freely programmable DPI switch with color display (5 steps) Weight tuning system (max. 19.5 g) On-board memory for macros Smooth running & finely adjustable scroll wheel Ergonomic design for convenient handling Special grip areas offering maximum hold Supported operating systems: Windows XP, Vista, 7/8 (32-/64-bit) Specifications: Max. DPI 3, 000 DPI/CPI stepping 400-800-1200-1600-3000 Max. acceleration 30 G Mouse weight max. 135 g (w/o cable)

Dimensions (L x W x H) 130 x 65 x 45 mm Sensor Optical Connector USB (Universal Serial Bus) (gold-plated) Cable length 180 cm (textile sheathing) Max. FPS 3, 600 Button reaction time 3 ms (left button), rest 16 ms Polling rate Max. 1000 Hz (1 ms) Onboard memory Yes Number of buttons 7 DPI indication Yes (LED) Mouse slide pads 5, plastic Chip Pix Art PAW3305 Lifting sensitivity 3 mm Weight Tuning System Yes, max. 19.5 g Package contents: Fire Glider Optical CD with software & manual (as PDF) Additional mouse skates Transport bag




...

The Sharkoon M25 series stands for minimalist design ATX Midi Tower, which is particularly impressive due to its versatile installation possibilities & its tidy appearance, both inside & out. The M25-W, available in both black & white, is especially deep. Its acrylic side panel displays what gamers care about, which stays well-lit thanks to the LED fan mounted on the rear panel of the case. However, the innovative distinguishing feature of the elegant case is not just its appearance, but also its rich sound: Thanks to its integrated sound card, demanding gamers benefit not only from the perfect coordination of their team but also from bombastic surround sound. Virtual 7.1 Sound The integrated sound card is attached to the front connectors on the case & suitable as a second sound source for the operation of speakers & headsets on a PC. In addition, existing Windows systems can be easily upgraded with virtual 7.1 sound. The included audio software for Windows allows individual equalizer functions with effects as well as microphone boost settings. The settings can be stored then bundled on the PC for later use in four different profiles. An unlimited number of configurations can be created to each of the four profiles. The integrated sound card conveniently connects on the mainboard via the internal USB (Universal Serial Bus) port. Systematic Arrangement The special construction of the case interior offers enormous possibilities for discreet installation of various components. Cabling can be inconspicuous & hidden, therefore not affecting airflow inside the case. The power supply & up to three 3.5" hard drives can be installed on the bottom of the case inside the tunnel, therefore not detracting from the appearance. The air vents on the tunnel, side & top, ensure optimal cooling of hard drives. The mainboard & the remaining components enjoy perfect cabling thanks to the cable outlets. Installing a new heat sink for the CPU is extremely easy thanks to an opening in the mainboard tray. A tower cooler up to 16.7 cm in height can be installed. Maximum length for graphics cards is 40 cm; power supplies with a length of up to 20.5 cm. Three pre-installed dust filters protect installed hardware from contamination. For cleaning, they are easily removable & placed back on. Another pre-installed filter is also on the top panel, which can be quickly removed thanks to its magnetic fastener. Cableless Front Panel Design Another big advantage of the M25-W is its cableless front panel design. The front panel can be easily removed without needing to disconnect any cables. This facilitates the installation of a 5.25" or 3.5" drive tremendously. Optimal Preparation for Perfect Airflow The front panel has on its right & left, hidden behind the mesh panel, numerous air inlets, which ensure a supply of cold air. Pre-installed in the front panel, behind the dust filter, are two 120 mm fans. Alternatively, there are suitable holes for two 140 mm fans. For water cooling, the M25-W offers the possibility of a 240 mm or 280 mm radiator, with a total height of 5.5 cm including fan, to be operated in the front of the case. On the rear panel of the case a 120 mm LED fan is pre-installed. If desired, three 120 mm or two 140 mm fans can be installed underneath the magnetic dust filter on the top panel. Oval hole cutouts offer excellent opportunities for perfect positioning of fans or radiators. Modern Front Connectors Two USB (Universal Serial Bus) 3.0 & two Audio ports in the front panel provide quick access to connect the most important peripheral devices. The USB (Universal Serial Bus) 3.0 ports are connected via a 19-pin mainboard connector, including alternative USB (Universal Serial Bus) 2.0 plug, to ensure backward compatibility with older mainboards. Versatile Mounting Options For optical drives, the M25-W offers two 5.25" drive bays with automatically locking tool-free device installation. By means of the enclosed 5.25" to 3.5" bay cover, for example, a card reader can be quickly & easily installed into one of the two 5.25" drive bays. If necessary, two 2.5" HDD/SSDs can be incorporated instead. If more space is needed, the screwed in drive bays can be completely removed. In the bottom of the case, up to two 3.5" hard drives, or two 2.5" HDD/SSDs decoupled, are installed by means of a mounting frame. Space for another 3.5" drive is also available on the bottom of the case. Behind the mainboard tray of the M25-W, & on the tunnel, are two mounts for 2.5" drive bay trays. Thus allowing, via convenient thumbscrews, installation of up to two 2.5" HDD/SSDs. ...

The Sharkoon M25 series stands for minimalist design ATX Midi Tower, which is particularly impressive due to its versatile installation possibilities & its tidy appearance, both inside & out. The M25-W, available in both black & white, is especially deep. Its acrylic side panel displays what gamers care about, which stays well-lit thanks to the LED fan mounted on the rear panel of the case. However, the innovative distinguishing feature of the elegant case is not just its appearance, but also its rich sound: Thanks to its integrated sound card, demanding gamers benefit not only from the perfect coordination of their team but also from bombastic surround sound. Virtual 7.1 Sound The integrated sound card is attached to the front connectors on the case & suitable as a second sound source for the operation of speakers & headsets on a PC. In addition, existing Windows systems can be easily upgraded with virtual 7.1 sound. The included audio software for Windows allows individual equalizer functions with effects as well as microphone boost settings. The settings can be stored then bundled on the PC for later use in four different profiles. An unlimited number of configurations can be created to each of the four profiles. The integrated sound card conveniently connects on the mainboard via the internal USB (Universal Serial Bus) port. Systematic Arrangement The special construction of the case interior offers enormous possibilities for discreet installation of various components. Cabling can be inconspicuous & hidden, therefore not affecting airflow inside the case. The power supply & up to three 3.5" hard drives can be installed on the bottom of the case inside the tunnel, therefore not detracting from the appearance. The air vents on the tunnel, side & top, ensure optimal cooling of hard drives. The mainboard & the remaining components enjoy perfect cabling thanks to the cable outlets. Installing a new heat sink for the CPU is extremely easy thanks to an opening in the mainboard tray. A tower cooler up to 16.7 cm in height can be installed. Maximum length for graphics cards is 40 cm; power supplies with a length of up to 20.5 cm. Three pre-installed dust filters protect installed hardware from contamination. For cleaning, they are easily removable & placed back on. Another pre-installed filter is also on the top panel, which can be quickly removed thanks to its magnetic fastener. Cableless Front Panel Design Another big advantage of the M25-W is its cableless front panel design. The front panel can be easily removed without needing to disconnect any cables. This facilitates the installation of a 5.25" or 3.5" drive tremendously. Optimal Preparation for Perfect Airflow The front panel has on its right & left, hidden behind the mesh panel, numerous air inlets, which ensure a supply of cold air. Pre-installed in the front panel, behind the dust filter, are two 120 mm fans. Alternatively, there are suitable holes for two 140 mm fans. For water cooling, the M25-W offers the possibility of a 240 mm or 280 mm radiator, with a total height of 5.5 cm including fan, to be operated in the front of the case. On the rear panel of the case a 120 mm LED fan is pre-installed. If desired, three 120 mm or two 140 mm fans can be installed underneath the magnetic dust filter on the top panel. Oval hole cutouts offer excellent opportunities for perfect positioning of fans or radiators. Modern Front Connectors Two USB (Universal Serial Bus) 3.0 & two Audio ports in the front panel provide quick access to connect the most important peripheral devices. The USB (Universal Serial Bus) 3.0 ports are connected via a 19-pin mainboard connector, including alternative USB (Universal Serial Bus) 2.0 plug, to ensure backward compatibility with older mainboards. Versatile Mounting Options For optical drives, the M25-W offers two 5.25" drive bays with automatically locking tool-free device installation. By means of the enclosed 5.25" to 3.5" bay cover, for example, a card reader can be quickly & easily installed into one of the two 5.25" drive bays. If necessary, two 2.5" HDD/SSDs can be incorporated instead. If more space is needed, the screwed in drive bays can be completely removed. In the bottom of the case, up to two 3.5" hard drives, or two 2.5" HDD/SSDs decoupled, are installed by means of a mounting frame. Space for another 3.5" drive is also available on the bottom of the case. Behind the mainboard tray of the M25-W, & on the tunnel, are two mounts for 2.5" drive bay trays. Thus allowing, via convenient thumbscrews, installation of up to two 2.5" HDD/SSDs. ...