The SANUS Classic MLF20-B1 is a full-motion mount for flat-panel TVs from 32 to 63 inches weighing up to 130 lbs. Featuring full-motion movement, the MLF20-B1 makes it possible to extend your TV up to 19.75 inches from the wall, tilt, swivel & pan it in any direction for the best possible viewing angle. Features include post-install adjustment for perfect positioning on the wall, & cable management clips for keeping loose cables tidy

Features: Fits 32- to 63-inch flat-panel TVs up to 130 lbs. Extends up to 19.75 inches from the wall Tilts up to 15 degrees Swivels & pans

...

The Sanus Classic MMF15-B1 is designed for flat-panel TVs 23"-37" & provides a full range of motion for optimal positioning. Its articulated arm can extend your display up to 15-1/2" from the wall, & can swivel up to 45° left or right. & it also tilts up or down. The mounting plate can swivel up to 45° left or right, & you can also tilt it slightly to ensure your TVs perfectly level. designed for flat-panel LCD TVs 23"-37" accommodates VESA 100 & 200 mounting hole patterns supports up to 60 lbs. extending arm holds TV up to 15-1/2" from wall mounting hardware included swivel range: 45° right & 45° left tilt range: +15° up to -15° down Virtual Axis™ allows smooth tilt motion with the touch of a finger in-arm channel conceals cables for clean appearance post-installation leveling adjustments for perfect positioning mounting plate pan range: 45° right & 45° left stud-mounting required ...

The Sanus Classic MMF10-B1 is designed for flat-panel TVs up to 42", & can extend your display up to 9-1/2" from the wall. You can swivel the mount up to 30° left or right. & it also tilts up or down. The mounting plate can swivel up to 45° left or right, & you can also tilt it slightly to ensure that your TV is perfectly level. designed for flat-panel TVs 26"-42" supports up to 100 lbs. holds TV up to 9-3/4" from wall mounting hardware included swivel range: 30° right & 30° left tilt range: +5° up to -15° down Virtual Axis™ allows smooth tilt motion with the touch of a finger mounting plate pan range: 45° right & 45° left

Includes:: clips to secure loose cables to mount stud-mounting required (with extension plates) 17-3/8"W x 12-5/8"H x 2-7/8"D

...

The SANUS Classic™ MML12 is a low-profile wall mount for most 26” to 42” flat-panel TVs up to 80 lbs. The low-profile brackets sit just 0.9” from the wall to complement the sleek, thin look of flat-panel TVs. Lateral shift ability makes it easy to center the TV on the wall, even with off-center studs. The mount’s open wall plate design provides generous space for concealed cable management. Comes pre-assembled for a quick & easy installation. Product

Width: 15.50" / 39.37 cm Product

Height: 13.00" / 33.02 cm Product Depth Min: 0.90" / 2.29 cm Product Depth Max: 0.90" / 2.29 cm Product Type Specifications TV Size Range: 26.00"
- 42.00" / 66.04cm
- 106.68cm Maximum TV Weight: 80.00 lb / 36.36kg Mounting Pattern: Universal





...

Add style to your home theater with a TV wall mount. A wall mount accentuates the look of your sleek flat-screen TV by placing it close to the wall so it hangs like a piece of art. A wall mount also creates more space in any room of the house—think of all the extra room you could have on top of your furniture, or remove furniture altogether for a modern look. Along with adding style, a wall mount ensures your expensive TV investment is placed securely on the wall where it can’t tip over. But the best reason to mount your TV: Performance. Full-motion & tilting mounts allow you to adjust the TV’s position so you always have the best viewing angle, from any seat in the room. Fits most flat-panel TVs 26"-40"" & up to 80 lbs. Fits moutning patters
- 75 x 75, 100 x 100, 200 x 100, 200 x 200, 300 x 200, 300 x 300 Innovative technology allows mount to tilt effortlessly without the use of tools Universal mounting brackets are designed to fit nearly all medium flat-panel TVs 26-40" Lateral shift allows TV to slide left & right for perfect placement, even with off-center studs

Includes:: easy-to-follow installation instructions


...

The SANUS LC1A is a tilt & swivel ceiling mount for 37" – 70" flat-panel TVs. This mount is a great choice for space-saving corner placement or when wall mounting is not an option. SANUS' Virtual Axis technology allows the mount to tilt up & down with the touch of a finger, & a unique wire management channel conceals & routes cables from ceiling to TV. SANUS LC1A tilt & swivel ceiling mount. Virtual Axis™ allows smooth tilt with the touch of a finger. TV rotates up to 6° after mounting to ensure it's perfectly level.

Includes:: wood joist or solid surface ceiling adapters & two pipe lengths for multiple configurations. Universal mounting brackets. Mount now fits TVs 37” – 70”, & all current LC1A models have been tested for compatibility with the updated size range. Specific installations may need additional accessories
- reach out to customer service with questions. Features Conceal unsightly cables Easily adjust your TV without tools Expandable TV brackets ensure a perfect fit Hardware included Our TV Mount products are Safety Tested & UL Certified Technical Information Movement Tilt: 15° / -5° Roll: 6° / -6° Swivel: 55° / -55° Mounting Patterns VESA 200 x 100 VESA 200 x 200 VESA 200 x 300 VESA 200 x 400 VESA 300 x 100 VESA 300 x 200 VESA 300 x 300 VESA 400 x 100 VESA 400 x 200 VESA 400 x 300 VESA 400 x 400 VESA 500 x 100 VESA 500 x 200 VESA 500 x 300 VESA 600 x 100 VESA 600 x 200 VESA 600 x 300 VESA 600 x 400 VESA 300 x 400 VESA 500 x 400


...

The SANUS VMPR1 is a tilt & swivel ceiling mount for projectors up to 50 lbs / 22.73 kg. Independent roll, yaw & pitch adjustment settings make set up & alignment easy, & a quick-release mechanism allows servicing of filters & bulbs without refocusing or realigning. Solid heavy-gauge steel construction adds strength & stability, & hardware-hiding bezels offer a sleek, high-tech look. Versatile mount design is compatible with more than 95% of all DLP & LCD projectors on the market.

Includes:: 7" / 17.78 cm extension pipe. Features Quick-release mechanism allows dismounting for servicing of filters & bulbs without realigning & refocusing Separate roll, tilt & swivel controls

Includes:: 7" / 17.78 cm extension pipe Conceal exposed hardware with decorative cover Maximum Projector Weight: 50lbs / 22.68kg Technical Information Movement Tilt: 30° / -30° Roll: 6° / -6° Swivel: 15° / -15°



...

The Sanus Vue Point F18 is a dual-purpose tilting & low-profile wall mount for most 13 – 32 flat-panel TVs & monitors up to 22.68 Kg. Tilting brackets offer up to 12 degrees of tilt with the touch of a finger, making it easy to reduce glare & improve viewing angles. Low-profile brackets place the TV just 1.35 from the wall for a clean, flush appearance. The F18 features a quick latching mechanism to hold TVs securely on the wall for added safety. This mount is pre-assembled & can be easily installed in minutes. Solid construction provides strength & durability. ...

The Sanus Vue Point F107 full-motion wall mount is a versatile, space-saving solution for most 13 – 26 flat-panel TVs & monitors up to 13.61 Kg. Easily mounted in the home or office, it offers smooth extend, swivel & pan motions up to 7.25 from the wall. Full-motion allows easy viewing from multiple angles without the use of tools. The F107 tilts with the touch of a finger, making it easy to reduce glare. Built-in cable management channels conceal & protect cables. Sturdy construction provides strength & durability. The F107 is pre-assembled for quick & easy installation. ...

When it comes to versatility, there’s a go-anywhere (ceiling mount access points) capability to this projector. One big reason is because it uses a X1.6 zoom lens. A lens like this can throw a crisp, bright 100” diagonal image from distance of only 7.9 feet. ...