Product Description With LC to SC termination, this high quality fibre optic patch cable is specifically designed for Fast Ethernet, fibre channel, ATM & Gigabit Ethernet applications. The small LC connectors satisfy the need for higher port density both in the telecom room & the work area, & offer twice the port density of traditional SC & ST fibre connectors. The LC connector with its RJ-style latch clip design is easy to engage & disengage, & gives each connection greater durability in resisting pulls, strains, snags, & impacts during cabling installs & maintenance. The SC connector features a push-pull locking system. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • LC Connector Dimensions: 10.75mm Height x 12.5mm Width x 50mm Depth (with installed duplex clip) • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cable: • Optical Multimode 1 (OM1) fibre supporting 200/500 MHz.km OFL at 850/1300 nm • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Cost-effective solution that provides high bandwidth & transmission rates over longer distances. With LC to SC termination, this high quality fibre optic patch cable is specifically designed for Gigabit Ethernet applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Each cable is 100% optically inspected & tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular 9/125 Single-mode fibre, immune to electrical interference. Features Warranty Details
- This product carries a lifetime warranty Jacket Rating
- The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures Jacket Design
- A pull-proof jacket design surrounds the popular 9/125 Single-mode fibre, immune to electrical interference Connection Durability
- The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs

Specification Type Patch cable
- OS1 Technology Fibre optic Type of Fibre Optics Singlemode Features Halogen-free Length 15 m Core / Cladding Diameter 9 / 125 micron Connector (s) 2 x LC single mode
- male Connector (s) (Other Side) 2 x SC single mode
- male Colour Yellow Manufacturer Warranty Limited lifetime warranty








...

Product Description Cost-effective solution that provides higher bandwidth & transmission rates & supports longer distances with lower loss than 62.5/125 fibre. Specifically designed for use with today's narrower aperture components, this cable is fully compatible with multimode applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • LC Connector Dimensions: 10.75mm Height x 12.5mm Width x 50mm Depth (with installed duplex clip) • ST Connector Dimensions: 9.8mm Height x 19.6mm Width x 59mm Depth Cable: • Optical Multimode 2 (OM2) fibre supporting 500 MHz.km OFL at 850/1300 nm. • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 2.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Product Description Cost-effective solution that provides high bandwidth & transmission rates over longer distances. With LC to ST termination, this high quality fibre optic patch cable is specifically designed for Gigabit Ethernet applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • LC Connector Dimensions: 10.75mm Height x 12.5mm Width x 50mm Depth (with installed duplex clip) • ST Connector Dimensions: 9.8mm Height x 19.6mm Width x 59mm Depth Cables: • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -55 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1550 nm: 0.25 d B/km • Attenuation at 1310 nm: 0.35 d B/km • Operating Temperature: -20°C to +70°C



...

The 50FIBLCLC15 15-meter (49ft) Multimode 50/125 Duplex Fiber Patch Cable is terminated at both ends with LC (male) connectors to provide the necessary connection between fiber networking devices for high-speed, long distance networks. Ensuring optimal data transfers & network stability, 50/125-micron cables offer nearly three times the bandwidth of 62.5/125-micron cables, so your data will be transferred at higher rates over longer distances. Each Duplex 50/125 Multimode Fiber Patch Cable is individually tested & certified to be within acceptable optical insertion loss limits for guaranteed compatibility & 100% reliability. The Star Tech.com Advantage Can maximize wiring conduit usage while minimizing installation problems Fiber Optic cables provide a higher quality signal over a greater distance Fiber Optic cables are an ultimate solution for high-speed data transmission Backed by Star Tech.com lifetime warranty ...

It’s all about selection. Choose the colors you want, the lengths you want, the styles you want. Select from a wide variety of colors, lengths, & styles to complete your network solutions. That way, you can organize your cable runs & identify network connections faster, easily find the cables that best suit your network connection requirements, & pick the styles, either snagless – perfect for concealed cable runs – or molded – perfect for strengthening the connector to prevent damage. 100% copper for outstanding value Get the highest value for your cable investment with our Cat 6 cables, each one manufactured using high-quality copper conductors. 24-gauge wire for high-performance network connections Ensure high-performance capability for your demanding Ethernet applications, such as Power-over-Ethernet, using cables that include 24 AWG copper. 50-micron gold connectors provide peak conductivity Rely on our RJ45 connectors to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion. Lifetime Warranty ...

It’s all about selection. Choose the colors you want, the lengths you want, the styles you want. Select from a wide variety of colors, lengths, & styles to complete your network solutions. That way, you can organize your cable runs & identify network connections faster, easily find the cables that best suit your network connection requirements, & pick the styles, either snagless – perfect for concealed cable runs – or molded – perfect for strengthening the connector to prevent damage. 100% copper for outstanding value Get the highest value for your cable investment with our Cat 6 cables, each one manufactured using high-quality copper conductors. 24-gauge wire for high-performance network connections Ensure high-performance capability for your demanding Ethernet applications, such as Power-over-Ethernet, using cables that include 24 AWG copper. 50-micron gold connectors provide peak conductivity Rely on our RJ45 connectors to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion. Lifetime Warranty ...

It’s all about selection. Choose the colors you want, the lengths you want, the styles you want. Select from a wide variety of colors, lengths, & styles to complete your network solutions. That way, you can organize your cable runs & identify network connections faster, easily find the cables that best suit your network connection requirements, & pick the styles, either snagless – perfect for concealed cable runs – or molded – perfect for strengthening the connector to prevent damage. 100% copper for outstanding value Get the highest value for your cable investment with our Cat 6 cables, each one manufactured using high-quality copper conductors. 24-gauge wire for high-performance network connections Ensure high-performance capability for your demanding Ethernet applications, such as Power-over-Ethernet, using cables that include 24 AWG copper. 50-micron gold connectors provide peak conductivity Rely on our RJ45 connectors to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion. Lifetime Warranty ...

Rotary Action 15mm Copper Pipe Cutter with Spare Blade Ideal for cutting 15mm copper pipe in close quarters. Supplied with spare cutting blade ...

With any CCTV system it’s essential the cameras are installed correctly. If you purchase your CCTV system from Ebuyer.com we can take away all the stress by installing your non-IP cameras for you. Purchase your CCTV cameras as normal & add this product to your basket. We will then contact you to arrange a suitable time & date to install your new equipment. Please note this product is for the installation of 16 (sixteen) non IP CCTV cameras. The cost of this product

Includes:: installation only & not the cost of the camera itself. To use this service your CCTV cameras must be purchased from Ebuyer.com. What’s included in this service? On arrival at your property our engineer will: Unpack DVR (if applicable), cameras & cabling. Mount cameras in your desired locations. Position camera view to your direction. Ensure cables are neatly pinned to the wall. Single entry hole to feed cables. Fill all holes with Silicon filler for protection against weather. Connect Ethernet cable from DVR to modem. Please note
- Ethernet Powerline twin set is required if modem is located more than one metre away from DVR. Download App to customer phone for supported phone. Set up App on your phone. Allow you to create your own log in. Allow you to view CCTV on mobile device (limited to 1 device). Finally our engineer will demonstrate the basic features of your new equipment to you. Important notes Please note the following restrictions: Property can only be a maximum of two stories high. Only 20 meters of cabling per camera. All goods must be on site prior to engineer arriving to complete works. Engineers will try their best to avoid damage to interior & exterior walls but cracks can occur due to impact of drilling. Before our engineer arrives Please ensure: You have a minimum Internet speed of 4mbps download & 0.5mbps upload. All cables are onsite including cat 5 cable. All passages are clear for engineer to move around without hindrance to complete the work & installation. You are responsible for the provision of a suitable monitoring device (TV/ Monitor etc.) to view the CCTV imagery produced by the DVR unit (HDMI/ VGA) You have the username & password for your broadband router to h&. Your router must be less than 18months old to enable port forwarding. Additional information There are certain installation conditions & circumstances that will require an on-site"e from the technician. This will be agreed before the installation commences. Additional parts are sometimes required to complete an installation; these parts can be purchased on site. Payment will be taken via phone – no cash transaction between customers & engineers are allowed or accepted onsite. Final camera mounting positions will be governed by available viewing angles & safe ladder access. Excess cabling maybe left behind the DVR/ Monitor unit.


...