Silent PSU with Temperature Control Fan Complies with Intel ATX12V 2.31VER Fan Speed Control Function Inside Passive PFC (Power Factor Correction) Low noise with intelligent-thermal fan control technology ATX 12V Compliant for all kinds of CPU & mainboard MTBF 50, 000 Hours @ 25 degrees C AC INPUT: 230 VAC 3A 50-60 Hz DC +3.3V +5V +12V1 -12V +5VSB Output 15A 12A 15A 0.3A 2A Max 300W 20+4 Pin Main Connectors:1 4-Pin 12V Connectors:1 SATA Connectors:2 4-Pin Molex Connectors:4 Floppy Drive Connectors:1 Dimensions: 125mm x 65mm x 100mm (W x H x D) Input Voltage: 230 VAC Input Current: 3A Input Frequency Range: 50-60 Hz PFC: Yes
- Passive Power Factor Control Power Good Signal: 150-450 ms Hold Up Time: 1ms-40ms Efficiency: 75% MTBF: 100, 000 Hours Protection: OVP / UVP/ OPP Power: 300W Operation Temperature: 45°C Safety: CE / ROHS Cooling: 8cm Fan Noise: < 17 d BA
...

The Ci T Mirage F6 Gaming Case is an ATX Mid-Tower PC Gaming Chassis, & comes with six pre-installed RGB Rainbow fans. The Mirage is made using two four millimetre tempered glass panels situated on the front & side of the chassis. Accompanied by the RGB Rainbow fans, they create a stunning visual impact. These can be easily controlled through the LED button on the top of the chassis. The Mirage is not all about the visual though
- the performance of this case should not be underestimated! Plenty of airflow & the front having been designed using ultra-wide vents provides a better overall performance & all in all the Mirage is great for gamers & enthusiasts alike. Features Mirage F6
- The Ci T Mirage F6 is a Mid-Tower PC Gaming Case supporting a standard ATX motherboard & comes with six pre-installed RGB Rainbow fans. The Mirage is not only pleasing on the eye, it possesses the performance to match making this case ideal for gamers & enthusiasts. Ultimate Airflow
- Six RGB Rainbow fans come as standard with the Mirage F6 & the chassis can mount another two fans (3 x 120mm at the front, 2 x 120mm at the top & 1 x 120mm at the rear are included
- there is space available for a further 2 x 120mm fans to be added on the PSU shroud of the chassis). This helps create the perfect balance of air running in & out of your system. Ultra-wide vent design on the front panel further increases the heat dissipation. Easier Control
- The Mirage comes with six preinstalled 120mm 1200RPM RGB Rainbow fans which can be controlled by using the LED button on the top I/O panel that cycles through 13 different lighting modes, guarantees superb colour illumination & increases overall airflow. Tempered Glass
- Two four millimetre tempered glass panels are included on the front & side of the chassis. These are thicker & scratch resistant compared to standard acrylic & provide a premium look, complementing the fans & creating a stunning contrast. The tempered glass side panel enables you to showcase your chosen components & all your RGB Rainbow. Full-Length PSU Shroud
- Keep your build tidier by keeping power supply & other cables out of sight, making clean builds even easier to achieve.






...

Excellent EMI protection design Refined design, with folded metal edges for safe assembly Sturdy structure 300W Micro ATX Standard PSU Fitted Main Board size: Mini ITX Power Supply: 300W Micro ATX Standard 5.25" Bays: 1 x External 3.5" Bays: 0 x External, 1 x Internal Cooling: Space for 1 x 8cm Front Fan Vent Holes to release hot air on the rear & both sides Front Connectors: 1 x Firewire IEEE1394 2 x USB2.0 Audio Microphone

Dimensions: 222mm x 182mm x 336mm (W x H x D)

...

- 300W Micro ATX Standard PSU Fitted
- Excellent EMI protection design
- Refined design, with folded metal edges for safe assembly
-


...

- Comes with 300W Power supply
- with 5cm Fan
- Coating
- Black powder coating.
- Very Slight

Dimensions
-






...

Micro-ATX, wiredrawing front panel, standard with USB3.0 x 1 + USB2.0 x 2 for superspeed Connecting of data transferring. Features a luxurious black colour, including the interior, & outstanding design. Comes with 1x 80mm fan on the rear which provides better cooling performance. Supports ATX power supply & Micro-ATX Motherboard Features Front panel
- wiredrawing front panel I/O port
- Standard with USB3.0 x 1 + USB2.0 x 2 for superspeed Connecting of data transferring body color
- Features a luxurious black colour, including the interior, & outstanding design. Cooling
- with 1x 80mm fan on the rear, which provides better cooling performance Power supply
- Support ATX power supply Motherboard
- Micro-ATX Motherboard Specifications Form Factor: Micro ATX Motherboard Support: Micro ATX, Mini ITX PSU Support: Standard ATX Gaming Case: No Water Cooling Ready: No Dimensions: 188mm x 374mm x 359mm (W x H x D) Packaging Dimensions: 220mm x 425mm x 402mm (W x H x D) Body
Material: 0.45mm SPCC black Front Bezel
Material: Plastic Side Panel: Vented External Bays: 1 x 5.25” External 1 x 3.5” External Internal Bays: 3 x 3.5” Internal 5 x 2.5” Internal Drive Bay Notes: 3 x 2.5" uses same bays as 3.5", 1 x 5.25" Behind USB (Universal Serial Bus) Expansion Slots: 4 x Full Size Cooling Front: Space for 1 x 80 or 120mm Cooling Top: None Cooling Rear: 1 x 8cm Fan Cooling Side: Space for 1 x 12cm Fan (Not Included) Cooling Bottom: None IO Ports: 1 x USB (Universal Serial Bus) 3.0 2 x USB (Universal Serial Bus) 2.0 1 x HD Audio 1 x Microphone Front Bezel
Colour: Black Body
Colour: Black System Cabinet
Features: PSU Included: Yes Net Weight (KGs): KGs










...

Micro-ATX, wiredrawing front panel, standard with USB3.0 x 1 + USB2.0 x 2 for superspeed Connecting of data transferring. Features a luxurious black colour, including the interior, & outstanding design. Comes with 1x 80mm fan on the rear which provides better cooling performance. Supports ATX power supply & Micro-ATX Motherboard Features Front panel
- wiredrawing front panel I/O port
- Standard with USB3.0 x 1 + USB2.0 x 2 for superspeed Connecting of data transferring Chassis
- Features a luxurious black colour, including the interior, & outstanding design Cooling
- with 1x 80mm fan on the rear, which provides better cooling performance Power supply
- Support ATX power supply Motherboard
- Support Micro-ATX Motherboard Specifications Form Factor: Micro ATX Motherboard Support: Micro ATX, Mini ITX PSU Support: Standard ATX Gaming Case: No Water Cooling Ready: No Dimensions: 188mm x 365mm x 359mm (W x H x D) Packaging Dimensions: 220mm x 425mm x 402mm (W x H x D) Body
Material: 0.45 SPCC BLACK Front Bezel
Material: Plastic Side Panel: Vented External Bays: 1 x 5.25” External 1 x 3.5” External Internal Bays: 3 x 3.5” Internal 5 x 2.5” Internal Drive Bay Notes: 3 x 2.5" uses same bays as 3.5", 1 x 5.25" Behind USB (Universal Serial Bus) Expansion Slots: 4 x Full Size Cooling Front: Space for 1 x 80 or 120mm Cooling Top: None Cooling Rear: 1 x 8cm Fan (Included) Cooling Side: Space for 1 x 12cm Fan (Not Included) Cooling Bottom: None IO Ports: 1 x USB (Universal Serial Bus) 3.0 2 x USB (Universal Serial Bus) 2.0 1 x HD Audio 1 x Microphone Front Bezel
Colour: Black Body
Colour: Black System Cabinet
Features: PSU Included: Yes Net Weight (KGs): KGs










...

Ci T Neptune Blue
- Black coating on exterior & interior for a nice, stylish finish Blue Tool-less Bays
- Make building a breeze

...

Ci T Neptune Green
- Black coating on exterior & interior for a nice, stylish finish Black Tool-less Bays
- Make building a

...

Key Features • Ci T Neptune Red
- Black coating on exterior & interior for a nice, stylish finish • Red Tool-less Bays
-

...