With Cisco VG Gateways, you can enjoy the benefits of unified communications while using your existing analog devices, including analog phones & fax machines. There’s no need to replace your entire phone system. Cisco VG Series Gateways help you migrate at your own pace & budget by taking full advantage of the investments you have already made. Features & Capabilities Cisco VG Series Gateways provide added flexibility during migration to unified communications by supporting traditional analog devices on IP networks. These devices include analog phones, fax machines, modems, voicemail systems, & speakerphones. The series offers a full range of solutions that include the following products: Cisco VG350 Analog Gateway: Offers a standalone solution for high-density deployments of up to 160 analog ports Provides mix & match modules for high density long or short loop length requirements Increases flexibility with additional slots available for FXS & FXO ports Reduces background noise & prevents acoustic shock Offers advanced power management using Cisco Energy Wise technology Cisco VG310 & VG320 Analog Gateways Standalone solutions for medium-density deployments of 24 & 48 ports or fewer Provide all the functionality of the VG350, but for lower density deployments Are housed in compact, 19-inch rack-mount chassis Cisco VG202XM & VG204XM Analog Gateways Standalone solutions for low-density two or four line deployments Combine RJ11 interfaces with Cisco IOS Software manageability to increase the functionality of analog equipment Are housed in compact, fanless, desktop chassis that are also wall-mountable Cisco High Density Analog Gateway Service Modules Serve as high density modules for Cisco 2900, 3900 & 4000 Series Integrated Services Routers Offers 72-port or 48-port options Offers a choice of high density long or short loop length solutions ...

The IP Communications High-Density Digital Voice/ Fax Network Modules are used with the new PVDM2 Packet Fax/ Voice DSP modules, providing scalability from 4 to 120 channels & featuring the latest digital signal processing technology. A maximum of four PVDM2s can be installed on each NM-HDV2 network module. Enterprises can conveniently select the minimum number & density-type PVDM2s depending on the voice channels they are deploying, & scale the number of PVDMs as they exp&. These new PVDM2 SIMMs can be configured for high-, medium- or flex complexity via software. Flex complexity is the default configuration, & in this mode, the network module will dynamically negotiate the appropriate codec (medium or high) on a call-by-call basis depending on the PVDM2s available. In addition, the DSPs on the PVDM2s can be shared across multiple IP Communications High-Density Digital Voice/ Fax Network Modules installed on a Multiservice Access Router. ...

The High-Density Packet Voice digital signal processor (DSP) Module (PVDM2) enables Cisco Systems Integrated Services Routers to provide high-density voice connectivity, conferencing, & transcoding capabilities in Cisco IP Communications solutions. Cisco Integrated Services Routers provide enterprises & service providers with a toll bypass solution by connecting their existing telephony equipment (such as private branch exchanges [PBXs], Key systems, analog telephones, & fax machines) to a toll-free data network; & eventually migrate customers to Cisco AVVID (Architecture for Voice, Video & Integrated Data) IP telephony solutions. ...

The Cisco High-Density Analog & Digital Extension Module for Voice & Fax (EVM-HD) provides enterprises, managed service providers & service providers the ability to directly connect public-switched telephone networks (PSTNs) & existing telephony equipment to Cisco 2821, Cisco 2851, Cisco 3825, & Cisco 3845 integrated services routers. With support for up to 24 total voice & fax sessions, the Cisco High-Density Extension Module is ideal for networks with high analog (foreign exchange station [FXS], direct inward dialing [DID], & foreign exchange office [FXO]) & digital (Basic Rate Interface [BRI]) call-capacity requirements. The Cisco High-Density Analog & Digital Extension Module for Voice & Fax (EVM-HD) is an industry-leading voice & fax interface module for Cisco 2821, Cisco 2851, Cisco 3825, & Cisco 3845 integrated services routers. It helps enable packet voice technologies with support for voice over IP (Vo IP), including H.323, Media Gateway Control Protocol (MGCP) & Session Initiation Protocol (SIP); voice over Frame Relay (Vo FR), & voice over ATM (Vo ATM), including ATM Adaptation Layer 2 (AAL2) & AAL5. The Cisco High-Density Extension Module allows Cisco 2821, Cisco 2851, Cisco 3825, & Cisco 3845 routers to connect directly to the PSTN & existing telephony equipment (for example, private branch exchange (PBX), Key system, analog telephones, & analog fax machines) through standard analog (FXS, DID, & FXO) & digital (BRI) interfaces. The High-Density Extension Module supports telephony toll bypass, new packet telephony applications, & full gateway integration within the Cisco AVVID (Architecture for Voice, Video & Integrated Data) IP telephony design. With support for up to 24 total voice & fax sessions, the Cisco High-Density Extension Module is ideal for networks with high analog & BRI call-capacity requirements. ...

The High-Density Packet Voice digital signal processor (DSP) Module (PVDM2) enables Cisco Systems Integrated Services Routers to provide high-density voice connectivity, conferencing, & transcoding capabilities in Cisco IP Communications solutions. Cisco Integrated Services Routers provide enterprises & service providers with a toll bypass solution by connecting their existing telephony equipment (such as private branch exchanges [PBXs], Key systems, analog telephones, & fax machines) to a toll-free data network; & eventually migrate customers to Cisco AVVID (Architecture for Voice, Video & Integrated Data) IP telephony solutions. ...

The Cisco voice interface cards (VICs) are daughter cards that install into the network modules & provide the interface to the PSTN & to telephony equipment (PBX, key systems, fax machines, phones). The VIC2-2BRI-NT/TE provides the ability to connect a PBX or PABX configured as user side directly to the router. It also provides phantom power to accommodate equipment that requires it. ...

This wall mount kit is available for Cisco IP Phone 8845, 8865, & 8865NR only. It can be locked, but it cannot be used with a key expansion module. Components:
- 6 8-18 x 1.25-inch Phillips-head screws
- 6 anchors
- 3 K30x 8mm self-tapping screws
- 1 phone bracket
- 1 wall bracket
- One 6-inch Ethernet cable
- 1 key if the bracket

Includes:: the optional lock








...

Cisco is the worldwide leader in networking for the Internet. Cisco provides the broadest line of solutions for transporting data, voice & video within buildings, across campuses, or around the world. Cisco solutions ensure that networks both public & private operate with maximum performance, security, & flexibility. ...

Cisco pays special attention to its network accessories, which are the foundation stone of the whole network system. Cisco cables will never let you down & you can always count on their superior quality & outstanding reliability. Cisco has a wide range of network cables, assemblies, connectors, adapters & other accessories that will fit any demands of the customers. This Non-Locking Wall Mount Kit is intended for 7900 series phones. ...

The network modules provide various port densities to meet customer requirements at various price points. The WAN-interface-card (WIC) option offers a single ISDN BRI port (with optional NT1). The WIC-1B-S/T-V3 inserts into a mixed-media network module or is supported on the Cisco 1700 Series, Cisco 1800 Series, Cisco 2600XM Series, Cisco 2800 Series, Cisco 3700 Series & Cisco 3800 Series routers. The ability to add BRI connectivity via a WIC enables administrators to maximize valuable slot space while providing additional connectivity options on the same module such as Fast Ethernet. ...