Meraki Go Indoor Wi Fi Access Point GR10: Dual-b&, 802.11ac Wave 2 2x 2:2 MU MIMO Radios 2.4 GHz 802.11b/g/n client access radio 5 GHz 802.11a/n/ac client access radio Supported frequency bands (country-specific restrictions apply): 2.412-2.484 GHz 5.150-5.250 GHz (UNII-1) 5.250-5.350 GHZ (UNII-2) 5.470-5.600, 5.660-5.725 GHz (UNII-2e) 5.725 -5.825 GHz (UNII-3) 802.11ac & 802.11n Capabilities 2 x 2 multiple input, multiple output (MIMO) with two spatial streams SU-MIMO & MU-MIMO support Maximal ratio combining (MRC) & Beamforming 20 & 40 MHz channels (802.11n), 20, 40, & 80 MHz channels (802.11ac) Up to 256 QAM on both 2.4 GHz & 5 GHz bands Packet aggregation Antenna Integrated omni-directional antennas (5.6 d Bi gain at 2.4 GHz, 5.3 d Bi gain at 5 GHz) Interfaces 1x 10/100/1000 BASE-T Ethernet (RJ45) 1x DC power connector (5.5 mm x 2.5 mm, center positive) Power Power over Ethernet: 37
- 57 V (802.3af compatible) Alternative 12 V DC input Power consumption: 11W max (802.3af) Power over Ethernet injector sold separately Environment Operating temperature: 32 °F to 104 °F (0 °C to 40 °C) Humidity: 5 to 95% non-condensing Physical
Dimensions 7.95” x 4.8” x 1” (202 mm x 123 mm x 26 mm), not including deskmount feet or mount plate Mobility PMK and OKC for fast Layer 2 roaming LED Indicators 2 Ethernet status 1 power/booting/firmware upgrade status Compliance Ro HS EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC In the Box GR10-HW: Meraki Go Indoor Access Point Wall mount & screw kit Quick start guide PSU & ethernet cable Note: Meraki Go subscription required Warranty 1 year hardware warranty