Performance Switching capacity: 88 Gbps Stacking bandwidth: 480 Gbps Capacity IPv 4 routes: 24000 Net Flow entries: 24000 Switched virtual interfaces (SVIs): 1000 Manageable access points: 5 MAC Address Table

Size: 32000 entries Jumbo Frame Support: 9198 Routing Protocol: RIP-1, RIP-2, EIGRP, RIPng Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, SSH, CLI Authentication Method: Kerberos, Secure Shell (SSH), RADIUS, TACACS+ Features Auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, IPv 6 support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAg P) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (Qo S), RADIUS support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Po E+, STP Root Guard, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv 4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Energy Efficient Ethernet, Cisco Stack Wise-480 technology, Cisco Stack Power technology, Flexible Net Flow (FNF) Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at RAM: 4 GB Flash Memory: 2 GB Status Indicators: Port transmission speed, port duplex mode, system, status, Po E Expansion / Connectivity Interfaces:
- 24 x 10 Base-T/100 Base-TX/1000 Base-T
- RJ-45
- Po E+
- 1 x USB (Universal Serial Bus)
- Type A
- 1 x console
- mini-USB Type B
- management
- 1 x RS-232
- RJ-45
- management
- 1 x 10 Base-T/100 Base-TX/1000 Base-T
- RJ-45
- management
- 2 x network stack device Expansion Slots: 1 (total) / 1 (free) x expansion slot Power Power Device: Internal power supply Installed Qty: 1 (installed) / 2 (max) Power Redundancy: Optional Power Redundancy Scheme: 1+1 (with optional power supply) Power Provided: 715 Watt Voltage Required: AC 120/230 V (50/60 Hz ) Miscellaneous MTBF: 269, 450 hours Compliant Standards: CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, EN55022 Class A, ICES-003 Class A, Ro HS, UL 60950-1 Second Edition, KCC, FCC Part 15 A, ISO 7779, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A Software / System Requirements Software Included: Cisco IOS IP Base

Dimensions & Weight Approximate

Width: 17.5 in Approximate

Depth: 17.7 in Approximate

Height: 1.8 in Approximate Weight: 16.3 lbs Environmental Parameters Min Operating Temperature: 23 °F Max Operating Temperature: 113 °F Humidity Range Operating: 10
- 95% (non-condensing) Min Storage Temperature: -40 °F Max Storage Temperature: 158 °F

























...

The Cisco Catalyst 3850 series is the enterprise-class stackable access-layer switches that provide full convergence between wired & wireless on a single platform. Cisco's Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch & enables uniform wired-wireless policy enforcement, application visibility, flexibility & application optimization. The Cisco Catalyst 3850 series switches support full IEEE 802.3at Power over Ethernet Plus (Po E+), modular & field-replaceable network modules, redundant fans & power supplies. ...

The Cisco Catalyst 3850 series is the enterprise-class stackable access-layer switches that provide full convergence between wired & wireless on a single platform. Cisco's Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch & enables uniform wired-wireless policy enforcement, application visibility, flexibility & application optimization. The Cisco Catalyst 3850 series switches support full IEEE 802.3at Power over Ethernet Plus (Po E+), modular & field-replaceable network modules, redundant fans & power supplies. ...

The Cisco Catalyst 3850 series is the enterprise-class stackable access-layer switches that provide full convergence between wired & wireless on a single platform. Cisco's Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch & enables uniform wired-wireless policy enforcement, application visibility, flexibility & application optimization. Features Converged wired plus wireless access The Cisco Catalyst 3850 is the first stackable access switching platform that enables wired plus wireless services on a single Cisco IOS XE software-based platform. With this, Cisco has pioneered a host of rich capabilities such as high availability based on stateful switchover (SSO) on stacking, granular Qo S, security, and Flexible Netflow (FNF) across wired & wireless in a seamless fashion. Flexible Net Flow (FNF) Full visibility into the wired plus wireless traffic is achieved because of the access point Control & Provisioning of Wireless Access Points (CAPWAP) tunnel termination on the switch. This helps identify users & user traffic flows in order to identify potential attackers & take corrective action at the access layer before the attack penetrates further into the network. This is achieved using FNF, which monitors every single flow entering & exiting the switch stack for wired & wireless users. It also helps identify the top wired/wireless talkers & enforce appropriate bandwidth provisioning policies. Advanced wired plus wireless Qo S capabilities The 3850 switch has advanced wired plus wireless Qo S capabilities. It uses the Cisco modular Qo S command line interface (MQC). The switch manages wireless bandwidth using unprecedented hierarchical bandwidth management starting at the per-access-point level & drilling further down to per-radio, per-service set identification (SSID), and per-user levels. This helps manage & prioritize available bandwidth between various radios & various SSIDs (enterprise, guest, and so on) within each radio on a percentage basis. The switch is also capable of automatically allocating equal bandwidth among the connected users within a given SSID. Provides a rich set of security features The Cisco Catalyst 3850 provides a rich set of security features for wired plus wireless users. Features such as IEEE 802.1x, Dynamic Host Configuration Protocol (DHCP) snooping, IP Source Guard & control plane protection, wireless intrusion prevention systems (WIPSs), and so on enable protection against unauthorized users & attackers. With a variety of wired plus wireless users connecting to the network, the switch supports session-aware networking, in which each device connected to the network is identified as one session, and unique access control lists (ACLs) and/or Qo S policies can be defined & applied using the ISE for each of these sessions, providing better control on the devices connecting to the network. ...

Best-in-class stackable access switch The Cisco Catalyst 3850 switch currently offers the industry's high 480 Gbps stacking bandwidth to meet network dem&, including Gigabit desktop & 802.11ac wireless. The switch delivers advanced capabilities such as a high-performance 24/48 ports GE switch, 480G stacking, Power over Ethernet Plus, Stack Power & flexible Net Flow on all ports. Converged wired & wireless access The Cisco Catalyst 3850 switch brings Cisco IOS excellence to wireless by extending wired infrastructure features, resiliency, granular Qo S, and scalability. It provides built-in wireless controller capabilities with 40G wireless throughput, support for 50 access points & 2000 wireless clients per switch or stack, and support for 802.11ac. Distributed intelligent services The Cisco Catalyst 3850 switch delivers common intelligent services across wired & wireless for security & policy, application visibility & control, network resiliency, smart operations, and more. The switch can enable multi-level Qo S based on granular information such as SSID, client, radio, application, and fair share policies for wireless. Foundation for Cisco open network environment The heart of Cisco Catalyst 3850 is the ASIC with programmability for future features & intelligence with investment protection. The ASIC provides a foundation for converged APIs across wired & wireless, software-defined networking (SDN) support, and Cisco one platform kit (One PK). Main Specifications
- Product Description: Cisco Catalyst 3850-48U-E
- switch
- 48 ports
- Managed
- desktop, rack-mountable
- Device Type: Switch
- 48 ports
- L3
- Managed
- stackable
- Enclosure Type: Desktop, rack-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 48 x 10/ 100/ 1000 (UPOE)
- Power Over Ethernet (Po E): UPOE
- Po E Budget: 800 W
- Performance: Switching capacity:176 Gbps Stacking band
Width:480 Gbps
- Capacity IPv 4 routes:24000 Net Flow entries:48000 Switched virtual interfaces (SVIs):1000
- MAC Address Table

Size: 32000 entries
- Jumbo Frame Support: 9198 bytes
- Routing Protocol: BGP-4, IS-IS, RIP-1, RIP-2, EIGRP, PIM-SM, EIGRP for IPv 6, OSPFv 3, PIM-SSM, RIPng
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, SSH, CLI
-

Features: Auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Syslog support, IPv 6 support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAg P) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (Qo S), RADIUS support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), STP Root Guard, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv 4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Energy Efficient Ethernet, universal power over Ethernet (UPOE), Cisco Stack Wise-480 technology, Cisco Stack Power technology, Flexible Net Flow (FNF)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at
- Power: AC 120/ 230 V (50/ 60 Hz )
- Power Redundancy: Optional
- Dimensions: (Wx Dx H) 44.5 cm x 45 cm x 4.45 cm
- Weight: 8kg
- Manufacturer Warranty: Limited lifetime warranty
































...

• 24 & 48 10/100/1000 Po E+ & non-Po E models • Optional four Gigabit Ethernet (Gb E) SFP or two 10 Gb E SFP+ uplink network modules • Industry first Po E+ with 30W power on all ports in 1 rack unit (RU) form factor • Dual redundant, modular power supplies & fans • Media Access Control Security (MACsec) hardware-based encryption • IPv 4 & IPv 6 routing, Multicast routing, advanced quality of service (Qo S), & security features in hardware • Enhanced limited lifetime warranty (LLW) with next business day (NBD) advance hardware replacement & 90 day access to Cisco Technical Assistance Center (TAC) support • Enhanced Cisco Energy Wise for operational cost optimization by measuring actual power consumption of the Po E devices, reporting, & reducing energy consumption across the network • USB (Universal Serial Bus) Type-A & Type-B ports for storage & console respectively & an out-of-band Ethernet management port. ...

Cisco Systems is the worldwide leader in networking for the Internet. Cisco's networking solutions connect people, computing devices & computer networks, allowing people to access or transfer information without regard to differences in time, place or type of computer system. Cisco Systems also provides a wide range of power options for its products that will give proven reliability & operational safety. ...

Cisco Systems is the worldwide leader in networking for the Internet. Cisco's networking solutions connect people, computing devices & computer networks, allowing people to access or transfer information without regard to differences in time, place or type of computer system. Cisco Systems also provides a wide range of power options for its products that will give proven reliability & operational safety. ...

The Cisco Catalyst 4500 Series Classic line cards provide 6 gigabits of switching capacity per slot. Classic line cards may be deployed in both classic & E-Series chassis with either classic Cisco Catalyst 4500 Series supervisor engines or with the Supervisor Engine 6-E. With the Supervisor Engine 6-E, the classic line cards per slot switching capacity remains at 6 gigabits per slot. However, because of the centralized switching architecture of the Cisco Catalyst 4500, the classic line cards will adopt all of the new Supervisor Engine 6-E features such as eight queues per port, dynamic Qo S, & hardware-based IPv 6 routing. ...

Cisco is the worldwide leader in networking for the Internet. Cisco provides the broadest line of solutions for transporting data, voice & video within buildings, across campuses, or around the world. Cisco solutions ensure that networks both public & private operate with maximum performance, security, & flexibility. The Cisco Catalyst 4500 Series 48-Port 10/100/1000 RJ-45 module has efficient power draw. ...